Thane, Maharashtra, India
Our Products
Drilling Bits, Chucks & Collets
2 Products availableHammers, Pliers & Screwdrivers
2 Products availableCarbide Cutting Tools
2 Products availableGearbox & Gear Parts
2 Products availableHand Tool
1 Products availableMeasuring Instruments & Equipment
1 Products availableOur product range contains a wide range of Tube Leak Detector Kits, Tube Drift, Sugar Mills Long Reach CSB, PARALLEL EXPANSION and Tube End Facer TEF
Note : Drive supplied with START, STOP, REVEERSE BUTTONS, QUICK RELEASE COUPLINGS, SOCKETS and REACTION BAR. Powerpack includes 2 hoses each of length 10 meters. if required longer hoses can be supplied.
| Tube Expansion Range | Drive | Drive No Load Speed (RPM) | Drive Weight kgs. | ||||
| Steel Tube O.D. | Copper Tube O.D. | Model No. |
Square Socket inch |
With HEP- 300/500/1000 |
|||
| mm | inch | mm | inch | ||||
| 15 - 25 | 5/8 - 1 | 25 - 38 | 1 - 1.1/2 | HED-3 | 3/8 | 620/954/800 | 9.6 |
| 19 - 38 | 3/4 - 1.1/2 | 32 - 64 | 1.1/4 - 2.1/2 | HED-4 | 3/8 & 1/2 | 350/480/400 | 9.7 |
| 38 - 76 | 1.1/2 - 3 | 50 - 102 | 2 - 4 | HED-5 | 1/2 & 3/4 | 62/84/70 | 11.0 |
| 50 - 102 | 2 - 4 | - | - | HED-6 | 3/4 & 1 | 40/62/54 | 11.5 |
The leak director detects tube leackage merely by pressing a button. The Pressurizing gun and plugging gun are inserted into opposite ends. Pressuring Gun lets in air to pressurise the tube to 100psi with compressed air. The guage will show and hold the pressure if there are no leaks. Conversly, apressure drop is indicated on guage incase of tube leak. A quick slide of exhaust valve silently lets out the air in tube and releases the gun for next tube test.
| Model | Tube O.D. inch | Tube thk. bwg | Model | Tube O.D. inch | Tube thk. bwg |
| SS - 0916 | 3/8 | 16 - 17 | SS - 2212 | 7/8 | 12 -13 |
| SS - 0918 | 3/8 | 18 - 19 | SS - 2214 | 7/8 | 14 -15 |
| SS - 0920 | 3/8 | 20 - 21 | SS - 2216 | 7/8 | 16 -17 |
| SS - 0922 | 3/8 | 22 - 23 | SS - 2218 | 7/8 | 18 - 19 |
| SS - 1214 | 1/2 | 14 - 15 | SS - 2220 | 7/8 | 20 - 21 |
| SS - 1216 | 1/2 | 16 - 17 | SS - 2509 | 1 | 9 - 10 |
| SS - 1218 | 1/2 | 18 - 19 | SS - 2510 | 1 | 10 - 11 |
| SS - 1220 | 1/2 | 20 - 21 | SS - 2512 | 1 | 12 - 13 |
| SS - 1222 | 1/2 | 22 - 23 | SS - 2514 | 1 | 14 - 15 |
| SS - 1512 | 5/8 | 12 - 13 | SS - 2516 | 1 | 16 - 17 |
| SS - 1514 | 5/8 | 14 - 15 | SS - 2518 | 1 | 18 - 19 |
| SS - 1518 | 5/8 | 18 - 19 | SS - 2520 | 1 | 20 - 21 |
| SS - 1520 | 5/8 | 20 - 21 | SS - 3112 | 1.1/4 | 12 - 13 |
| SS - 1911 | 3/4 | 11 - 12 | SS - 3114 | 1.1/4 | 14 - 15 |
| SS - 1912 | 3/4 | 12 - 13 | SS - 3116 | 1.1/4 | 16 - 17 |
| SS - 1914 | 3/4 | 14 - 15 | SS - 3118 | 1.1/4 | 18 - 19 |
| SS - 1916 | 3/4 | 16 - 17 | SS - 3120 | 1.1/4 | 20 - 21 |
| SS - 1918 | 3/4 | 18 - 19 | - | - | - |
| SS - 1920 | 3/4 | 20 - 21 | - | - | - |
| Bore Range | Tool Model No. | Pilot Nose Model No. | Circular From Cutter Model No. | Tool Bit Holder Model No. | Spare Tool Bit Model No. | |
| mm | inch | |||||
| 9 - 32 | 3/8 - 1.1/4 | 1 NW - 2 MT | 1 NW - PN | 1 NW - CF | 1 NW - TBH | 1 NW - TB |
| 16 - 45 | 5/8 - 1.3/4 | 2 NW - 3 MT | 2 NW - PN | 2 NW - CF | 2 NW - TBH | 2 NW - TB |
| 19 - 48 | 3/4 - 1.7/8 | 4 NW - 4 MT | 4 NW - PN | 4 NW - CF | 4 NW - TBH | 4 NW - TB |
| 38 -102 | 1.1/2 - 4 | 6 NW - 5 MT | 6 NW - PN | 6 NW - CF | 6 NW - TBH | 6 NW - TB |
Features :
| Tube O.D. | Model No. | |
| mm | inch | |
| 12.70 | 1/2 | TSHB-1/2 |
| 15.87 | 5/8 | TSHB-5/8 |
| 19.05 | 3/4 | TSHB-3/4 |
| 22.22 | 7/8 | TSHB-7/8 |
| 25.40 | 1 | TSHB-1 |
| 31.75 | 1.1/4 | TSHB-1.1/4 |
| 38.10 | 1.1/2 | TSHB-1.1/2 |
| 44.45 | 1.3/4 | TSHB-1.3/4 |
| 50.80 | 2 | TSHB-2 |
| 57.15 | 2.1/4 | TSHB-2.1/4 |
| 63.50 | 2.1/4 | TSHB-2.1/4 |
| 69.85 | 2.3/4 | TSHB-2.3/4 |
| 76.20 | 3 | TSHB-3 |
All pulling guns are supplied with Forward,
Reverse, and Auto Cycle Switches.
| Gun Model | Pulling Capacity | Max. Tube O.D. Thru Gun | Stub Pulling Capacity | Weight | Free Pulling Speed (meter/mim) with | ||||
| tons | inch | inch | kgs. | lbs. | TPP-50 | TPP-75 | TPP-30 | PPP-50 | |
| HPG-15 | 15 | 1 | 1.1/2 | 26 | 57 | 5.2 | 8.4 | 1.8 | 5.6 |
| HPG-30 | 30 | 1.1/2 | 3 | 38 | 84 | 3.0 | 3.7 | 2.4 | 3.5 |
| HPG-45 | 45 | 3 | 4 | 78 | 172 | 2.0 | 2.7 | 2.0 | 2.3 |
Used to collapse tube and drive out collapsed tube from tube sheet with a chipping hammer.
Recommended for use on 16G and thinner tubes.
Available on 01 and 06 shanks as standard.
Suffix model number with shank number when ordering. Example for 3/4" O.D. 16G, 06 shank, model number will be CT-750-06.
Collasping tools are available for mm tube sizes and larger tube sizes.
Exension chair is sized to allow tube being pulled to enter I.D. of chair. Spears, Adaptors, Male x Male Extension, Horse Shoe Lock and Extension Chair are needed for sizes 1.1/4" O.D. and larger. Male x Female Extensions are used for longer reach. Consult us for sizes not listed here.
We are the main supplier of this product.
