Nikko Wires India Private Limited

Antharasanahalli, Tumkur, Karnataka

We offer a superior range of enamelled copper wires aiming to cater the wide variety of applications in the industry ranging from a common motor rewinding to most critical applications. Description We offer a superior range of enamelled copper wires aiming to cater the wide variety of applications in the industry ranging from a common motor rewinding to most critical applications like in automobiles. Enamelled winding wire is a film insulated copper (or aluminium) electrical conductor used in form of coil windings in motors, transformers, generators and other electromagnetic equipments. When wound into coils, and energized, enamelled winding wire creates an electromagnetic field, which is utilized to generate the required output form of energy – viz electrical to mechanical (or vice versa) electrical to electrical, and electrical to magnetic energy. Application Super Enamelled Copper wires are mainly used in domestic equipments, pumps, motors, stabilizers, transformers, fans, auto electricals, heavy duty domestic appliances.

Concentric lay stranded Aluminium Conductor (AAC) is made up of one or more strands of hard drawn 1350 aluminum alloy. These conductors are used in low, medium and high voltage overhead lines. AAC has seen extensive use in urban areas where spans are usually short but high conductivity us required. The excellent corrosion resistance of aluminium has made AAC a conductor of choice in coastal areas. Because of its relatively poor strength to weight ratio, AAC had limited use in transmission lines and rural distribution because of long spans utilized. Nikko Wires can manufacture & supply AAC on Non returnable wooden / steel reels or in Bundle form depending on customer requirement. Features High Current Carrying Capacity excellent resistance to corrosion Ideal for use in coastal area suitable for low & medium voltage lines in urban area Specifications AAC manufactured by Nikko Wires meets or exceeds the requirements as of IS398 Part 1 : 1996 and of all international standards like ASTM, AS, BS, CSA, DIN, IEC, NFC, SS, etc.  

Aluminium Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminium wire on galvanized steel wire core. The core can be single wire or stranded depending on the size. Steel core wire is available in Class A , Class B or Class C galvanization for corrosion protection. Additional corrosion protection is available through the application of grease to the core or infusion of the completed conductor with grease. The proportion of steel and aluminium in an ACSR conductor can be selected based on the mechanical strength and current carrying capacity demanded by each application. ACSR conductors are recognized for their record of economy, dependability and favourable strength / weight ratio. ACSR conductors combine the light weight and good conductivity of aluminium with the high tensile strength and ruggedness of steel. In line design, this can provide higher tensions, less sag, and longer span lengths than obtainable with most other types of overhead conductors. Nikko Wires manufacture and supply ACSR on Non-Returnable wooden/steel reels or in Bundle form depending on customer requirement. Features High Tensile Strength better sag properties economic design best suited for transmission lines with long spans Specifications ACSR manufactured by Nikko Wires meets or exceeds the requirements as of IS398 Part 2 : 1996 and of all international standards like ASTM, AS, BS, CSA, DIN, IEC, NFC, SS, etc.  

We offer Bare Aluminium & Copper Wire as per the requirement of Customers, With good quality Wire with all the test conducted as per specification. Application Bare Aluminium & Copper Wire can be used in Earthing purpose and to produce Rivets, DPC Wire, PVC Wire, Conductors and Insulating Wires. Size Range 0.60mm - 7.5mm Specifications IS 1897 IS 6160

We also offer poly wrapped winding wire commonly known as “ Waterflex Submersible Copper Winding Wire”. The copper conductor is wrapped with thin polyester film and Biaxial oriented poly propylene (BOPP) films. The most modern plant with sophisticated wrapping heads and a complete quality assurance testing by instruments covering all governing standards is available. Application Submersible Winding Wires are used in submersible pumps motors of all sizes for domestic and industrial application. Size Range 0.60mm- 1.50 mm Specifications IS 8783:1995

The demand of aluminium magnet wires in many industrial applications has sky rocketed due to unprecedented increase in copper rates. To cater this demand, we proudly declare the addition of super enamelled aluminium magnet wires in the product armory. These are manufactured as per Indian as well International standards and as per the specifications given by the customers. The product is available in different sizes, types and grades of coverings to cater to specific needs for special fields of applications. The latest technology is adopted for manufacturing to offer high quality products. Application Aluminium is an excellent electrical conductor after copper. The super enamelled aluminium wire can be used to replace the copper enamelled wires with proper design modifications. Mainly it is used in electronic circuits, television degaussing coils and so on for many more applications including washing machine motors, fans and AC compressors. The conductor properties of these wires differ from that of enamelled copper wires. Our products have a smooth surface and a very good elongation. Size Range, Types and Specifications Wire Dia Sizes from 0.40 to 1.20 mm (18 to 26 SWG), Grade – 1, 2, and 3 Modified Polyesters, Class 130, 155. As per IS 13730 part 9 / IEC 60317 part 9 Hermetic Grade, Class 180. As per IS 13730 part 15 / IEC 60317 part 15 Dual Coated, Class 200. As per IS 13730 part 25 / IEC 60317 part 25 and NEMA MW 35A