Pumps, Pumping Machines & Parts
Our product range contains a wide range of V4 Submersible Pumpset, V6 Submersible Pumpset, V8 Submersible Pumpset and Domestic Self Priming Pump
V4 Submersible Pumpset
-
Bore size min.
4”(100mm) and above
-
Power Range
0.5 to 7.5 HP
-
Voltage Range
220V- 240V, AC Single phase , 50Hz 340V- 440V, AC Three phase , 50Hz
-
Speed
2880RPM
-
Motor Type
Water filled water cooled Induction motor
-
Coupling
Key / NEMA
-
Head
Maximum 455 M
-
Discharge
Maximum 30, 000 LPH
-
Liquid temperature
Maximum 35ºC
-
Sand content in water
Maximum 50 PPM
Features
- Induction motors are easily re-windable using multi layer PVC insulated wire for better reliability.
- Motor filled with water gives better cooling to winding as well as bush.
- Self-aligned Teflon OR carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication.
- Electrically designed to lower power consumption and operating cost.
- Non-magnetic, corrosion-resistant high-grade stainless steel stator body.
- Water-filled motor is available in capacitor start and run design.
- Gun Metal bush is made with additional centrifugal molding process and 2 % Nickel is added
- Superior designed Noryl impellers and diffusers give higher hydraulic performance and greater efficiency and provide higher resistance against wear and tear from sand and other impurities.
- Stainless steel strainer prevents particles over a certain size from entering the pump.
- Pumps are available with non-return valve to reduce the backpressure of water when it is switched off.
- Impeller and Bowl are accurately machined by CNC machine to ensure high dimension accuracy.
- Rubber bush and SS hard chrome sleeve increase wear-resistance against sand.
- Lightweight, compact and robust construction design.
Application
- Sprinkler and drip irrigation
- Urban and Rular resident water Supply and Industries
- Fire fighting system
- Agriculture
Material Of Construction
MOTOR |
Stator Shell |
Stainless steel |
Thrust Bearing |
Taflon/Carbon with stainless steel segments |
Bearings Bush |
Leaded Tin Bronze/ Carbon |
Breather Diaphragm |
Nitrile Rubber |
Shaft |
Stainless steel |
PUMP |
Pump shaft |
Stainless steel |
Discharge casing |
Cast Iron |
Shaft sleeve |
Stainless Sleeve / Engineering Plastic |
Bowl/Diffuser |
Engineering Plastic |
Impeller |
Engineering Plastic |
Strainer |
Stainless steel |
View Complete Details
V6 Submersible Pumpset
-
Bore size min.
6”(150mm) and above
-
Power Range
3.0 to 30.0 HP
-
Voltage Range
340V- 440V, AC Three phase , 50Hz
-
Speed
2880RPM
-
Motor Type
Water filled and water cooled Induction motor
-
Coupling
Key / NEMA
-
Head
Maximum 398 M
-
Discharge
Maximum 1600 LPM
-
Liquid temperature
Maximum 35ºC
-
Sand content in water
50 PPM
Features
- Energy efficient motor
- Low operating cost
- Water lubricated motor with easily re-woundable stator
- Radial and mixed flow models(with special High-Head design)
- Pump sets with special materials are available on request
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
Application
- Water extraction from bores of diameter 6" (150mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
Material Of Construction
MOTOR |
Stator Shell |
Stainless steel |
Thrust Bearing |
Teflon/Carbon with stainless steel segments |
Bearing Brush |
Leaded Tin Bronze/ Carbon |
Diaphragm |
Nitrile Rubber |
Shaft |
Stainless steel |
Strainers |
Stainless steel |
PUMP |
Pump shaft |
Stainless steel |
Discharge casing |
Cast Iron / Stainless steel |
Shaft sleeve |
Stainless steel |
Bowl/Diffuser assembly |
Cast Iron / Stainless steel |
Bearing Bush |
Leaded Tin Bronze/Carbon/Nitnie Rubber |
Impeller |
Stainless steel / Engineering plastic |
View Complete Details
V8 Submersible Pumpset
-
Bore size min.
8”(200mm)and above
-
Power Range
10.0 to 85.0 HP
-
Voltage Range
340V- 440V, AC Three phase , 50Hz
-
Speed
2880RPM
-
Motor Type
Water filled Water Cooled motor
-
Coupling
Key / NEMA
-
Head
Maximum 320 M
-
Discharge
Maximum 2600 LPM
-
Liquid temperature
Maximum 35ºC
-
Sand content in water
Maximum 50 PPM
Features
- Energy Efficient Motor
- Low operating cost
- Water lubricated motor with easily re-woundable stator
- Radial and mixed flow models
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
Application
- Water extraction from bores of diameter 8” (200mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Public water supply to large residential areas and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply & Fire Fighting
Material Of Construction
MOTOR |
Stator Shell |
Stainless steel |
Thrust Bearing |
Teflon/Carbon with SS segments |
Bearings Bush |
Leaded Tin Bronze/ Carbon |
Diaphragm |
Nitrile Rubber |
Shaft |
Stainless steel |
Strainers |
Stainless steel |
PUMP |
Pump shaft |
Stainless steel |
Discharge casing |
Cast Iron |
Inlet bracket |
Cast Iron |
Bowl/Diffuser assebly |
Cast Iron / Bronze |
Bearing Bush |
Leaded Tin Bronze |
Impeller |
Cast stainless steel |
View Complete Details
Domestic Self Priming Pump
-
Weight
10-20kg
-
Power
10hp, 0.5 HP to 1.0 HP
-
Driven Type
Electric
-
Warranty
1year
-
Application
Water Solution
-
Flow rate(Q)
1~600m3/h
-
Discharge Head(H)
10~75m
Features
- The motor body is made from extruded aluminum and cast iron for better heat dissipation.
- Capacitor starts and runs motor with IP 44 protection.
- Pre-lubricated double-shielded ball bearings for a longer life.
- High quality carbon-ceramic mechanical seal for a longer life.
- The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration.
- Protective Enclosure – Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture.
- Pump can operate in wide voltage range.
Application
- High rise buildings
- Car washing
- Hospitals
- Hotels
- Domestic water
View Complete Details