Nikasam Impex LLP

Jamnagar, Gujarat

Anchor Fasteners are very important tool for fixing bolts or screws tightly inside the surfaces. Brass Anchors are used for medium and light duty fixing in Building Industry like Electrical, Sanitary Installation work, Air-conditioning, Mounting of suspended ceilings, heating systems etc. These parts are also known as wood desk anchors and brass drop anchors.
We (Nikasma Impex LLP) are one of the leading Indian supplier, manufacturer and exporter of high quality of Brass Anchor Fasteners with various size and Threads.

Brass bolts are integral part of hardware items. Bolts are everywhere used along with nuts to connect two different parts. Due to its rust free and corrosion resistant properties, brass bolts are used in long lasting fittings.
We manufacture and supply brass bolts in number of shapes, sizes and finishing for variety of industrial and domestic applications. Standards DIN-931, DIN-933 and other global standards

Brass bolts are integral part of hardware items. Bolts are everywhere used along with nuts to connect two different parts. Due to its rust free and corrosion resistant properties, brass bolts are used in long lasting fittings.
We manufacture and supply brass bolts in number of shapes, sizes and finishing for variety of industrial and domestic applications. Standards DIN-931, DIN-933 and other global standards.

Brass Washers are used in conjunction with bolts or screws to distribute the load over wider surface or to prevent the fitting from losing. Bushing on the other hand is a kind of plain bearing to reduce friction between rotating shafts and static/fixed base components. We are manufacturer, supplier and exporters for all types of brass made bushes and brass washers.

Brass terminal connectors are used wherever two pieces of electrical wire need to be joined together without soldering. These types of connectors are found in electrical equipments, Switch gears, MCB-ELCBs, and structured electrical wiring. It helps quick connection and disconnection operations for installation or removal of equipments and parts from equipment assembly or structured wiring quickly and easily. In circuit breakers, MCB, ELCB and other switching devices, terminal connectors are used to connect input and output wires.
We supply all types of terminal blocks, terminal connectors and neutral links in variety of sizes and quality standards. We supply brass TC (Terminal Connectors) in all the global standards and specifications.

Flare Union tube with male ends and NPT threads super quality brass and Excellent finish.

Brass metal Flare fitting union connectors available in various sizes from 8mm to 25mm.

Stove Jets for domestic and industrial LPG stoves in number of sizes and finish.

Brass components for Gas cylinder adaptor for swivel type fittings.

Gas fitting Swivel Link for increased movement at either end of the gas connector.

Gas fitting Swivel Nipple for rotating swivel connections.

Flare union socket or Inverted flare union parts from best quality brass metal.

Propane or LPG gas tank/Bottle adapters for domestic and Industrial use.

Best quality audio jack parts for mono and stereo both types of audio jacks.

Banjo fittings are used to pass pressurized fluid. Banjo fitting parts are used in oil braking system and hydraulic systems.

Slow jets or Pilot jets are used in carburetor for tuning efficiency of engine. It is adjusted for efficiency and power of the vehicle.

These components are fixed in fuel tank valve. A filter mesh is wraped around these parts to filter the fuel.

Brass made high pressure pin point jet sprayer for Water sprayers.

Extended Hex Wheel Hubs RC Wheel Spacers/Brass Weights for crawler cars.

Brass made back push patches for Ear-Ring and other imitation/artificial jewelleries.

Heat-Set inserts are designed specifically for notch-sensitive plastics. These inserts are heated at particular temperature and fixed into plastic parts. Brass inserts are most efficient as compared to other metal inserts due to its higher thermal conductivity.

Embedded Insert Nuts are kind of inserts which are Embedded into plastic parts or precision gears. These are used in 3D printers, plotters and many other electronic devices. Mostly this types of inserts are non-removable.

Press-In inserts are installed by simply pressing the inserts in to pre-molded or drilled holes. Inserts are placed on the body hole and Moderate to high pressure is applied based on application on the insert tip to fix it into the body.

The main jet provides the fuel to wide-open throttle. The fuel flows up and out through the needle jet into the throat of the carburetor.

Hex Type Main Jets are also carburetor main jets for transferring fuel to wide open throttle through the needle jet.

Break line unions are used in oil breaking system to couple (connect) break lines.

Brass components used in temperature sensor assembly for radiator cooling fan temperature sensors.

Brass toggle switch parts like toggle lever and threaded housing to surround the lever.

Brass PCB Wire terminals are brass components mounted on PCBs for terminating connecting signal wires.

Air Compressor Check valve and accessories made from best quality Brass metal.

Brass Screw Lock for Imitation Neck Lace or Mala or artificial jewellery.

Best quality Brass made Hook Lock for artificial and goden jewellery items.

Brass Patches to open-close necklace/Mala and other jewellery items.