Post Buy Requirement
NI

Ngp Industries Ltd.

Add Review

Our Products

  1. Mattress

    2 Products available
  2. Roofing Sheets

    2 Products available
  3. Ceiling Boards

    1 Products available
  4. Paper

    1 Products available
  5. Repair & Maintenance Services

    1 Products available
  6. Pipe & Tube Fittings

    1 Products available
  7. Tapes

    1 Products available
  8. Cladding Materials And Building Panels

    1 Products available
  9. Blankets

    1 Products available
  10. Others Products 7 Products available

Other Products / Services

Leading Manufacturer, Supplier & Retailer of rockloyd slabs, Rockloyd-Nodulated Rockwool and Rockloyd Inhibited Rockwool.

Rockloyd Slabs

  • temperatures up to 750º C
  • Standard Thickness 40, 50, 60, 75 mm
Rockloyd Slabs are designed for thermal and acoustic insulation of flat or slightly curved surfaces operating at temperatures up to 750 C. The robust fibers combine high levels of thermal efficiency. Approved for A - 60 class insulation. Suitable for acoustical insulation.
View Complete Details

Coal Tar Enamel

  • COMPATIBILITY Compatible with all form of Industrial Material
  • MOISTURE Water Repellent, Non Hygroscopic
Loid T-11 (Coal Tar Enamel) is widely accepted as one of the most effective & economical anti-corrosion protection material. It serves as the most protective measure against corrosion and deterioration due to rusting. Loid T-11 (Coal Tar Enamel) is manufactured in accordance with standards BS: 4164, AWWA: C203 and IS: 10221.
View Complete Details

Coal Tar Tape

  • temeprature 180° C to 210° C
Loid Coal Tar Enamel is widely used for Corrosion protection, Resistance to Bacteria & Marine Organism, Resistant to Catholic Disbanding, Resistant to Root Growth Penetration, High Electrical Resistivity, and Chemical Stability, High resistant to Petroleum Products etc. and provides long term protection to applicant areas and taking its full advantage unrivaled properties are being preferred to use in subterranean pipe lines, submarine cross country pipe lines, underground pipe lines, penstock, inclined piping etc.There are no special requirements for storage of solid enamel, although storage in shaded area is helpful when breaking up the enamel into smaller pieces.
View Complete Details

Rockwool Mattress

  • temperature 7500 C
Rockloyd Lightly Resin Bonded Rockwool Mattress conforming to IS - 8183, ASTM - C553, C592 and equivalent BS-3958 part -3 is a lightly resin bonded insulating material available with or without facing. Mattresses can be faced on one side or both sides to form a firm but flexible multi-purpose insulating materials.
View Complete Details

Lrb Mattresses

  • Thickness 40, 50, 65, 75 mm
  • Size 1520 x 1220 mm
Rockloyd Lightly Resin Bonded Rockwool Mattress conforming to IS - 8183, ASTM - C553, C592 and equivalent BS-3958 part -3 is a lightly resin bonded insulating material available with or without facing. Mattresses can be faced on one side or both sides to form a firm but flexible multi-purpose insulating materials. Service temperature of Rockloyd Mattress is upto 7500 C.Rockloyd Mattress are specially developed to use in large process pipe-work, tanks, vessels boilers and ducts to provide unrivalled combination of matchless thermal insulation, fire protection, sound attenuation, high performance and flexibility of use.
View Complete Details

Insulated Roofing Panels

  • Base metal Thickness (mm) 0.42, 0.45, 0.50
  • Dimensions (mm) 860 X 12, 000*, 1040 X 12, 000*
The product range comprise of profile sheet of various types developed to provide scientific solutions for roof and side walls of industrial as well as commercial buildings. The product provides with a precisely engineered wide "Rib and Flute" design to ensure wide spanning and quick recovery after being subjected to excessive loads. This product offers new dimensions to architectural aesthetics and frees the designer of monotonous standard Trapezoidal design.
View Complete Details

Insulated Roofing Sheets

  • Thickness 0.42 mm
  • Dimensions (mm) 860 X 12, 000*
The product range comprise of profile sheet of various types developed to provide scientific solutions for roof and side walls of industrial as well as commercial buildings. The product provides with a precisely engineered wide "Rib and Flute" design to ensure wide spanning and quick recovery after being subjected to excessive loads. This product offers new dimensions to architectural aesthetics and frees the designer of monotonous standard Trapezoidal design.To meet the most stringent architectural design requirements, products are being made available in the following base material and external finish combinations.
View Complete Details

Rockwool Pipe Insulation

  • temperatures 750ºC.
Rockloyd Preformed Rockwool Pipe Section conforming ASTM - C547, IS - 9842 : 1994 and equivalent BS 3958 Part 4 is intended for the thermo-acoustic insulation and fire protection of pipe works operating at temperatures up to 750C. The pipe insulation is manufactured from long non-combustible rock fibers with a high performance binder.
View Complete Details

Rockloyd Preformed Rockwool Pipe Section

  • Service Temperature up to 750°C
  • Standard Thickness* 40, 50, 65, 75 mm
Rockloyd Preformed Rockwool Pipe Section is intended for the thermo-acoustic insulation and fire protection of pipe works operating at temperatures up to 750C. The pipe insulation is manufactured from long non-combustible rock fibers with a high performance binder.
View Complete Details

Rockloyd-Nodulated Rockwool

  • Specific Density 150-250 Kg/m³
Rockloyd-Nodulated Rockwool is a premium quality engineered mineral fibre. A specific combination of different types of volcanic rocks and well-defined bio-soluble.
View Complete Details

Puf Slabs

  • Temperature Range -200°C to +110°C
UF materials are suitable for temperature range between -200C to +110C. PIR Slabs & Pipe Sections are suitable for use between -200C to +145C. It has low thermal conductivity value of maximum 0.021 wmk at 10C. It is not easily ignitable and has negligible water permeability. It is suitable for cold chilled pipelines, building roof & wall insulation, equipment insulation and horton sphere insulation.
View Complete Details

Puf Pipe Support

  • Temperature + 1500C to - 2000C
PUF materials are suitable for temperature range between -200C to +110C. PIR Slabs & Pipe Sections are suitable for use between -200C to +145C. It has low thermal conductivity value of maximum 0.021 wmk at 10C. It is not easily ignitable and has negligible water permeability. It is suitable for cold chilled pipelines, building roof & wall insulation, equipment insulation and horton sphere insulation. PUF PIR is available in boards, pipe sections, radiused and beveled lags, with or without factory laminated facings.
View Complete Details

Polyurethane Foam PUF Panels

A heavy duty easy to install prefabricated pipe support system of truly revolutionary proportions. Pipe Supports are made from specially formulated chemical systems that results inn high density rigid polyurethane foam.
View Complete Details

Fibre Blankets

Supercera Blanket is a refractory fibre needled mat made without binder from Supercera fibres the only super-spun double needled fibre in the country today. Supercera RTZ and HTZ blankets zirconica stabilized and are suitable for use upto 1260C and 1425C respectively. Both blankets have excellent resistance to most chemicals. If wet by oil or water, their thermal and physical properties are fully restored upon drying. It is available in density of 64, 96 & 128 kgm3. size 7620x610mm, thickness: 6, 12, 20, 25, 50 mm. They confirm to IS 15402 & ASTM C892.Temporary repair of refractory furnace linings and roofs.
View Complete Details

Rockloyd Inhibited Rockwool

Rockloyd Inhibited Rockwool is specially developed to provide excellent corrosion resistent properties. It is preferred on SS surface, where stress corrosoin needs to be stoped like in ship building industries, offshore, refineries, petrochemical plants & humid regions.
View Complete Details

Rockwool Board

  • Country of Origin India
  • Size 72x36inch
  • Type Rockwool Mattress

Rockwool insulation products are thermaly efficient insulation materials and are fully safe to use under all conditions. Rockwool is asbestos free. Rockwool materials has been used world wide for over 70 years, and during that time, their manufacture and use have been extensively monitored and researched.

View Complete Details

Ceramic Paper

  • Thickness 1 to 6 mm
  • Size 1000mm x 500mm
  • Density 240 kg/m3
Ceramic Paper is manufactured from high temperature Supercera Ceramic Fibre product containing 20-25% organic material to give it an extra ordinary pliability. If wet by water, steam or oil, its thermal and physical properties are restored up on drying.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us