High Performance Alloys stocks and produces Monel 400 in this grade in the following forms: Bar, square bar, wire spool, wire cuts, loose coil, sheet/plate, tube, pipe, flange. Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

NG Industries is a renowned Manufacturer, Exporter and Supplier of Monel 400 Sheets & Monel K500 Sheets in India and abroad. Monel 400 Plates (UNS N04400) is based on copper (20-29 %) and nickels (65-70 %) and as well contains manganese and iron (5 %) along with other compounds. Monel K500 Plates (UNS N05500) are widely used in different application industries like Chemicals, Fats & Fertilizers, Ship Builders, Sugar Mills & Distilleries, Paper Industries, Cement Industries, and so on. These Alloy 400 Sheets can also be supplied in made to order length sizes and as well machined or fabricated to meet your requirements in piping system. The clients can avail the Alloy K500 Sheets from us in varied specifications to cater to the diverse requirements.

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to nonoxidizing mineral acids, salts and alkalis.
• This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
• Good mechanical properties from subzero temperatures up to about 480C.
• Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
• Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
• Excellent resistance to chloride ion stress corrosion cracking.

Titanium Alloys ASTM B265 Gr 1 Coils Titanium Alloys Gr 1 UNS R50250 Coils Exporter Titanium Alloys DIN 3.7025 Coils
NG Industries is one of the main Manufacturers, Suppliers and Exporters of top notch Titanium Grade 1 Coils. Our Titanium Grade 1 Coils are testimonials of our quality principles. Commercially Pure Titanium Grade 1 Coils is one of the mildest and most pliable evaluations displaying the best formability. It has astounding corrosion resistance property, great weldability and is utilized as a part of a wide assortment of utilizations. This evaluation material is basically utilized as a part of marine and compound commercial enterprises where the parts are subjected to exceptionally harsh environments. This material is likewise utilized for creating anodes for cathodic protection applications.

These Titanium Grade 1 Coils are utilized as a part of different application industry. Working towards the point of customer fulfillment, we offer these items at the most reasonable industry costs.

Pure Titanium Alloys Gr 1 UNS R50250 Plates, Sheets & Coils Exporter Pure Titanium Alloys DIN 3.7025 Plates, Sheets & Coils
NG Industries is one of the main Manufacturers, Suppliers and Exporters of top notch Pure Titanium Grade gr1 Plates. Our Pure Titanium Grade1 Plates are testimonials of our quality principles. Commercially Pure Titanium Grade1 Plates is one of the mildest and most pliable evaluations displaying the best formability. It has astounding corrosion resistance property, great weldability and is utilized as a part of a wide assortment of utilizations.
This evaluation material is basically utilized as a part of marine and compound commercial enterprises where the parts are subjected to exceptionally harsh environments. This material is likewise utilized for creating anodes for cathodic protection applications. These Titanium Grade1 Sheets & Plates are utilized as a part of different application industry. Working towards the point of customer fulfillment, we offer these items at the most reasonable industry costs.

Commercially Pure Titanium Grade 1 plate is the softest titanium and has the highest ductility. It has good cold forming characteristics and provides excellent corrosion resistance. It also has excellent welding properties and high impact toughness.

We are the prominent stockist and suppliers of high quality aluminum coil, which are widely appreciated for their high tensile strength. Catering to the requirements of diverse industries, these coils have a high demand in domestic as well as international markets. The aluminium coils are available in different grades and width & categories. These can also be provided as per the customer's requirements / specifications.

The heat treatable alloys of 2xxx, 6xxx, and 7xxx are such that when subjected to thermal temperatures, they gain pronounced strengthening. Hence, tempers are indicated by "T". These alloys are also inventoried in clad form to increase corrosion resistance. All of the aluminum alloys are available in the annealed condition or commonly referred to as "O".

• Durable
• Rust Proof
• High tensile strength
• Longer working life

• Grade : Commercial & Anodizing quality
• Sizes (In mm) : 0.2, 0.3, 0.4, 0.5, 0.56, 0.6, 0.7, 0.91, 1.22.

NG Industries is a best Aluminum Chequered Plates & Aluminum Checkered Sheet Manufacturer, Suppliers and Exporters in Ahmedabad, Gujarat and in India. Our product range also comprises of Aluminium Metal Products, Aluminum Plates and Aluminium Bars.

We are counted among the most distinguished organizations that are engaged in supplying premium quality Chequered Plates in india. These products are offered by us in different dimensions and sizes, to ensure variety to our variegated customer needs. These Chequered Plates are highly reliable as these are fabricated using optimum quality material. Our plates are available to our clients at reasonable prices.

With the large scale of supplying Network & Ability to cater Giant Project in various large Industries to supply our products as all types of Aluminium Chequered Plates raw materials right now we are exporting our products in all Major countries all over the world.some of them are United States, United Arab Emirates, Canada, Pakistan, Spain, France, United Kingdom, Indonesia, Iran, Kuwait, Qatar, Yamen Mexico, Malaysia, Nigeria, Singapore, Saudi Arabia, Netherlands, Brazil, Colombia, Egypt, Iraq, Sri Lanka, Russia, Vietnam, South Africa, Nigeria, Turkey, Bangladesh, Italy, Japan, Thailand, Hong Kong, Switzerland, New Zealand We welcome your inquiries.

High Performance Alloys stocks and produces Monel 400 in this grade in the following forms: Bar, square bar, wire spool, wire cuts, loose coil, sheet/plate, tube, pipe, flange. Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

NG Industries is a renowned Manufacturer, Exporter and Supplier of Monel 400 Sheets & Monel K500 Sheets in India and abroad. Monel 400 Plates (UNS N04400) is based on copper (20-29 %) and nickels (65-70 %) and as well contains manganese and iron (5 %) along with other compounds. Monel K500 Plates (UNS N05500) are widely used in different application industries like Chemicals, Fats & Fertilizers, Ship Builders, Sugar Mills & Distilleries, Paper Industries, Cement Industries, and so on. These Alloy 400 Sheets can also be supplied in made to order length sizes and as well machined or fabricated to meet your requirements in piping system. The clients can avail the Alloy K500 Sheets from us in varied specifications to cater to the diverse requirements.

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to nonoxidizing mineral acids, salts and alkalis.
• This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
• Good mechanical properties from subzero temperatures up to about 480C.
• Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
• Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
• Excellent resistance to chloride ion stress corrosion cracking.

Titanium Alloys ASTM B265 Gr 1 Coils Titanium Alloys Gr 1 UNS R50250 Coils Exporter Titanium Alloys DIN 3.7025 Coils
NG Industries is one of the main Manufacturers, Suppliers and Exporters of top notch Titanium Grade 1 Coils. Our Titanium Grade 1 Coils are testimonials of our quality principles. Commercially Pure Titanium Grade 1 Coils is one of the mildest and most pliable evaluations displaying the best formability. It has astounding corrosion resistance property, great weldability and is utilized as a part of a wide assortment of utilizations. This evaluation material is basically utilized as a part of marine and compound commercial enterprises where the parts are subjected to exceptionally harsh environments. This material is likewise utilized for creating anodes for cathodic protection applications.

These Titanium Grade 1 Coils are utilized as a part of different application industry. Working towards the point of customer fulfillment, we offer these items at the most reasonable industry costs.

Pure Titanium Alloys Gr 1 UNS R50250 Plates, Sheets & Coils Exporter Pure Titanium Alloys DIN 3.7025 Plates, Sheets & Coils
NG Industries is one of the main Manufacturers, Suppliers and Exporters of top notch Pure Titanium Grade gr1 Plates. Our Pure Titanium Grade1 Plates are testimonials of our quality principles. Commercially Pure Titanium Grade1 Plates is one of the mildest and most pliable evaluations displaying the best formability. It has astounding corrosion resistance property, great weldability and is utilized as a part of a wide assortment of utilizations.
This evaluation material is basically utilized as a part of marine and compound commercial enterprises where the parts are subjected to exceptionally harsh environments. This material is likewise utilized for creating anodes for cathodic protection applications. These Titanium Grade1 Sheets & Plates are utilized as a part of different application industry. Working towards the point of customer fulfillment, we offer these items at the most reasonable industry costs.

Commercially Pure Titanium Grade 1 plate is the softest titanium and has the highest ductility. It has good cold forming characteristics and provides excellent corrosion resistance. It also has excellent welding properties and high impact toughness.

We are the prominent stockist and suppliers of high quality aluminum coil, which are widely appreciated for their high tensile strength. Catering to the requirements of diverse industries, these coils have a high demand in domestic as well as international markets. The aluminium coils are available in different grades and width & categories. These can also be provided as per the customer's requirements / specifications.

The heat treatable alloys of 2xxx, 6xxx, and 7xxx are such that when subjected to thermal temperatures, they gain pronounced strengthening. Hence, tempers are indicated by "T". These alloys are also inventoried in clad form to increase corrosion resistance. All of the aluminum alloys are available in the annealed condition or commonly referred to as "O".

• Durable
• Rust Proof
• High tensile strength
• Longer working life

• Grade : Commercial & Anodizing quality
• Sizes (In mm) : 0.2, 0.3, 0.4, 0.5, 0.56, 0.6, 0.7, 0.91, 1.22.

NG Industries is a best Aluminum Chequered Plates & Aluminum Checkered Sheet Manufacturer, Suppliers and Exporters in Ahmedabad, Gujarat and in India. Our product range also comprises of Aluminium Metal Products, Aluminum Plates and Aluminium Bars.

We are counted among the most distinguished organizations that are engaged in supplying premium quality Chequered Plates in india. These products are offered by us in different dimensions and sizes, to ensure variety to our variegated customer needs. These Chequered Plates are highly reliable as these are fabricated using optimum quality material. Our plates are available to our clients at reasonable prices.

With the large scale of supplying Network & Ability to cater Giant Project in various large Industries to supply our products as all types of Aluminium Chequered Plates raw materials right now we are exporting our products in all Major countries all over the world.some of them are United States, United Arab Emirates, Canada, Pakistan, Spain, France, United Kingdom, Indonesia, Iran, Kuwait, Qatar, Yamen Mexico, Malaysia, Nigeria, Singapore, Saudi Arabia, Netherlands, Brazil, Colombia, Egypt, Iraq, Sri Lanka, Russia, Vietnam, South Africa, Nigeria, Turkey, Bangladesh, Italy, Japan, Thailand, Hong Kong, Switzerland, New Zealand We welcome your inquiries.