NG Industries

Khetwadi, Mumbai, Maharashtra

NG Industries supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.Hallmark Metallica supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

NG Industries Specializes in Supplying and Exporting ASME SB 168 Inconel Sheets. Inconel alloys are typically used in industries having high temperature applications. Inconel alloys are Oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat.

NG Industries is one of the most prominent manufacturer and supplier of Inconel 600 Coils can be achieved via shielded metal-arc welding, TIG, and MIG. Inconel 600 Coils can be joined by the usual welding, brazing, and soldering process. Alloy 600 Sheets are almost exclusively supplied in the annealed condition. Bar stock may need to be stress relieved, or annealed before performing any heading operations. Alloy 600 Plates are often in a lot of applications such as for Heat treating retorts and muffles, Vacuum furnace fixtures, Titanium dioxide plants, Chlorination machinery to 1000 Degree F, etc. Our Alloy 600 Coils is mixture of pure and best quality metals as our experts check very carefully each and every step of mixture. These products come in standard sizes. Other customized sizes and shapes are welcome as well.

Inconel 600 Coil are most quality finishing fittings & used for long life, high pressure & zero defects. Inconel 600 Coil is alloys retain strength, toughness and resistance to corrosion in a high temperature environment. These alloys are used in various industries & precious applications Like refineries, chemical plants and power generation, Nuclear Power, Aerospace etc at NG Industries. The Inconel 600 Coil are manufactured to sustain very high pressure and comes with one year warranty. our fittings differentiation is based on the premier finish of Inconel 600 Coil with minimum burr at the edge .

NG Industries is one of the main Manufacturers, Supplier and Exporters of Inconel 600 Plates. NG Industries offer quality Inconel 600 Plates to our clients over the globe. These Inconel 600 Plates highlights astounding disintegration resistance, high versatility level and sturdiness. Further, these are available in different sizes as indicated by the requirements of our clients.

Being an especially convincing, slope and fast moving affiliation, we are greatly progressive in giving an expansive show of Inconel 600 Plates. As per the ASTM standards, these mechanical Inconel 600 Plates are manufactured by our industry-stars with a particular final objective to make a predominant quality degree. Offered lifted quality cutting edge Inconel 600 Plates are made available in different assessments to meet overall quality gauges.

Incoloy 800 is a nickel-chromium alloy with high strength and superb resistance & Incoloy 800H and 800 HT are nickel-iron-chromium alloys. OZAIRTRADELINK is a leading supplier and exporter of Incoloy 800/800H/800HT Strips, Sheet & Plate. We provide Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate globally as per made-to-order requirements given by our highly valued clients, to meet the quality demands of our customers.

Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate are available in different types such as Incoloy Alloy 800/800H/800HT Strips, Sheet & Plates(ASME SB-409, AMS 5877), Incoloy Alloy 800/800H/800HT Strips Exporter in India, Incoloy Alloy 800/800H/800HT Sheets Exporter in India, Incoloy Alloy 800/800H/800HT Plates Exporter in India, Incoloy Alloy UNS N08800/N08810/N08811 Strips, Sheet & Plates, Incoloy Alloy DIN 1.4876/1.4958/1.4859 Strips, Sheet & Plates, 800/800H/800HT Incoloy Strips, Sheet & Plates, Incoloy Alloy UNS N08800/N08810/N08811 Plates, Incoloy Alloy UNS N08800/N08810/N08811 Sheet, Incoloy Alloy UNS N08800/N08810/N08811 Plates, Incoloy Alloy 800/800H/800HT Shim Sheets, Incoloy Alloy 800/800H/800HT DIN 1.4876/1.4958/1.4859 Chequered Plate.

Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate was proposed for high temperature basic applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embitterment from precipitation of sigma stage. Meanwhile, for high temperature applications requiring optimum rupture and creep properties, Incoloy Alloy 800H Plates (UNS N08810 Plates) and Incoloy Alloy 800HT Strip(UNS N08811 Strip) are used. Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate are also referred as WNR 1.4876 Sheets, WNR 1.4958 Plates and WNR 1.4859 Strip respectively.

Incoloy 800 is a nickel-chromium alloy with high strength and superb resistance & Incoloy 800H and 800 HT are nickel-iron-chromium alloys. OZAIRTRADELINK is a leading supplier and exporter of Incoloy 800/800H/800HT Strips, Sheet & Plate. We provide Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate globally as per made-to-order requirements given by our highly valued clients, to meet the quality demands of our customers.

Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate are available in different types such as Incoloy Alloy 800/800H/800HT Strips, Sheet & Plates(ASME SB-409, AMS 5877), Incoloy Alloy 800/800H/800HT Strips Exporter in India, Incoloy Alloy 800/800H/800HT Sheets Exporter in India, Incoloy Alloy 800/800H/800HT Plates Exporter in India, Incoloy Alloy UNS N08800/N08810/N08811 Strips, Sheet & Plates, Incoloy Alloy DIN 1.4876/1.4958/1.4859 Strips, Sheet & Plates, 800/800H/800HT Incoloy Strips, Sheet & Plates, Incoloy Alloy UNS N08800/N08810/N08811 Plates, Incoloy Alloy UNS N08800/N08810/N08811 Sheet, Incoloy Alloy UNS N08800/N08810/N08811 Plates, Incoloy Alloy 800/800H/800HT Shim Sheets, Incoloy Alloy 800/800H/800HT DIN 1.4876/1.4958/1.4859 Chequered Plate.

Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate was proposed for high temperature basic applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embitterment from precipitation of sigma stage. Meanwhile, for high temperature applications requiring optimum rupture and creep properties, Incoloy Alloy 800H Plates (UNS N08810 Plates) and Incoloy Alloy 800HT Strip(UNS N08811 Strip) are used. Incoloy Alloy 800/800H/800HT Strips, Sheet & Plate are also referred as WNR 1.4876 Sheets, WNR 1.4958 Plates and WNR 1.4859 Strip respectively.

High Performance Alloys stocks and produces Monel 400 in this grade in the following forms: Bar, square bar, wire spool, wire cuts, loose coil, sheet/plate, tube, pipe, flange. Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

NG Industries is a renowned Manufacturer, Exporter and Supplier of Monel 400 Sheets & Monel K500 Sheets in India and abroad. Monel 400 Plates (UNS N04400) is based on copper (20-29 %) and nickels (65-70 %) and as well contains manganese and iron (5 %) along with other compounds. Monel K500 Plates (UNS N05500) are widely used in different application industries like Chemicals, Fats & Fertilizers, Ship Builders, Sugar Mills & Distilleries, Paper Industries, Cement Industries, and so on. These Alloy 400 Sheets can also be supplied in made to order length sizes and as well machined or fabricated to meet your requirements in piping system. The clients can avail the Alloy K500 Sheets from us in varied specifications to cater to the diverse requirements.

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to nonoxidizing mineral acids, salts and alkalis.
• This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
• Good mechanical properties from subzero temperatures up to about 480C.
• Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
• Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
• Excellent resistance to chloride ion stress corrosion cracking.

High Performance Alloys stocks and produces Monel 400 in this grade in the following forms: Bar, square bar, wire spool, wire cuts, loose coil, sheet/plate, tube, pipe, flange. Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

NG Industries is a renowned Manufacturer, Exporter and Supplier of Monel 400 Sheets & Monel K500 Sheets in India and abroad. Monel 400 Plates (UNS N04400) is based on copper (20-29 %) and nickels (65-70 %) and as well contains manganese and iron (5 %) along with other compounds. Monel K500 Plates (UNS N05500) are widely used in different application industries like Chemicals, Fats & Fertilizers, Ship Builders, Sugar Mills & Distilleries, Paper Industries, Cement Industries, and so on. These Alloy 400 Sheets can also be supplied in made to order length sizes and as well machined or fabricated to meet your requirements in piping system. The clients can avail the Alloy K500 Sheets from us in varied specifications to cater to the diverse requirements.

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to nonoxidizing mineral acids, salts and alkalis.
• This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
• Good mechanical properties from subzero temperatures up to about 480C.
• Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
• Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
• Excellent resistance to chloride ion stress corrosion cracking.

An aluminum alloy is a chemical composition where other elements are added to pure aluminum in order to enhance its properties, primarily to increase its strength. These other elements include iron, silicon, copper, magnesium, manganese and zinc at levels that combined may make up as much as 15 percent of the alloy by weight. Alloying requires the thorough mixing of aluminum with these other elements while the aluminum is in molten liquid form.

An aluminum alloy is a chemical composition where other elements are added to pure aluminum in order to enhance its properties, primarily to increase its strength. These other elements include iron, silicon, copper, magnesium, manganese and zinc at levels that combined may make up as much as 15 percent of the alloy by weight. Alloys are assigned a four-digit number, in which the first digit identifies a general class, or series, characterized by its main alloying elements.

Some alloys are strengthened by solution heat-treating and then quenching, or rapid cooling. Heat treating takes the solid, alloyed metal and heats it to a specific point. The alloy elements, called solute, are homogeneously distributed with the aluminum putting them in a solid solution. The metal is subsequently quenched, or rapidly cooled, which freezes the solute atoms in place. The solute atoms consequently combine into a finely distributed precipitate. This occurs at room temperature which is called natural aging or in a low temperature furnace operation which is called artificial aging.

Non-heat treated alloys are strengthened through cold-working. Cold working occurs during rolling or forging methods and is the action of working the metal to make it stronger. For example, when rolling aluminum down to thinner gauges, it gets stronger. This is because cold working builds up dislocations and vacancies in the structure, which then inhibits the movement of atoms relative to each other. This increases the strength of the metal. Alloying elements like magnesium intensify this effect, resulting in even higher strength.