Our Products
Grinding & Milling Tools & Machinery
2 Products availableIndustrial Machinery
2 Products availableBuilding Hardware
2 Products availableLamination, Wrapping & Banding Machines
2 Products availablePunching Machines
1 Products availableMachine And Precision Tools
1 Products availableRoll Forming & Bending Machines
1 Products availableConveyors
1 Products availableWe offer the best product range of Gluing Machine, sheet-pasting Machine and Secondary Gluing Machine.
1.Paste glue roller and fixed roller with 45 steel, quenched the surface, the hole machining; do homeostasis surface grinding roller body engraved with pit-style textured, gluing evenly and consume less plastic. 2.PLC touch screen, heavy type, Squeegee roller surface grinding and hard chrome plated. 3.Remaining over the paper guide roller shaft and hard chrome plated.Platen roller up and down adopt pneumatic control, easy to operate.Glue the gap between the roller and roller squeegee using manual or electric inverter control. 4 .Automatic cycle for glue, glue to prevent sedimentation. 5.Preheat cylinder using Q235B container board, produced by professional manufacturers of pressure vessels, the preheating device, can accelerate the glue paste. 6.Bearings: Harbin Bearing. 7.Electronic components, accessories: adopt Shineider brand 8.Pneumatic component, rotary joints, metal hose: AirTAC selection, Tengzhou Jinxuan genuine products.
| Effective working width | 1800mm | ||
| 2 | Operating direction | According to customer’s requirement | |
| 3 | wallboard | Adopt casting HT200/thick 120mm | |
| 4 | Pre-heater diameter | Ø270 mm | |
| 5 | Given paste roll diameter | Ø142 mm | |
| 6 | Down Preheat roll diameter | Ø402 mm | |
| 7 | Up preheat roll diameter | Ø374 mm | |
| 8 | Steam consumption | 0.1－0.15MPa | |
| 9 | Compressed air | 0.6－0.9Mpa | |
| 10 | Main motor frequency cycloid | 3.0KW ratio：1:9 | |
| 11 | Electric adjust glue gap | 100W ratio：1:1800 |
Suitable for gluing the fluted side of the liner / Board for making 3, 5, 7, 9 & 11 ply. The machine is
2.fitted with feeding table, delivery stick, paste holding tray.
| Size | 75” |
|---|---|
| Output per min. | 60mtrs |
| Power | 0.5 HP |
1.Glue-coating roller surface by conditioning, inner hole processing; Do the dynamic balance roller body surface grinding engraved with pit type anilox, glue uniform and consumption quantity of cement less.scrape rubber roller surface grinding and hard chromium plating processing. 2.The rest had paper axes and leading paper roll surface hard chromium plating. 3.Pressure paper roll lifting adopts adopt pneumatic control, convenient operation. 4.Glue-coating roller and scraping rubber roller clearances between using devise of electric or air control.(option)5.This machine is of independent drive, automatic cycle glue supply, prevent glue precipitation, equipped with to heat device, can accelerate glue gelatinization. 6.This equipment simple structure, reliable operation, low failure rate, convenient operation, simple maintenance, Energy consumption low.
Adambakkam, Chennai, Tamil Nadu 