Parameters al24 al32 a-32standard deviation per kilometer double - run 2mm 1mm 1.5mmimage positive image positive image positive imagemagnification 24x 32x 32xclear objective aperture 36mm 36mm 36mmfield of view 1o20 1o20 1o20shortest focusing distance 0.4 m 0.65 m 0.4 mstadia multiplication constant 100 100 100stadia additive constant 0 0 0circular bubble precision 8 2mm 8 2mm 8 2mmhorizontal circle 360o 360o 360ocompensator type air suspension -damping air suspension-damping magnetic suspension-dampingworking range 15 15 15setting accuracy 0.3 0.3 0.3screw thread m16 or 58 m16 or 58 m16 or 58.

We are the main supplier of this product.

Specification:-
These are available in different sizes and are made according to Indian and British standard.

Specification:-
It is designed to carry a load of 140kgs. The apparatus consist of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on the shaft of a vibrator clamped to the underside of the table top.

Specification:-

Vibrating machine consist of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame consist of a vice to hold a 7.06cm cube mould and two studs thread at the top and a hopper feed the sample in the mould.

Specification:-
A compression testing machine consist of a load frame with suitable platens and a pumping unit with pressure gauge either hand operated or electrically-cum hand operated.

We have a range of compression testing machine capacity from 10 tonnes to 200 tones in different models.

Specification:-
It is motorised mechanical unit. The speed is adjusted so that the load increases on the specimen is between 4 to 6 kg/sec. This instrument is used for testing 40mm x 40mm x 160mm mortar specimen for flexure by single point load.

Specification:-
Moisture content at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled ino thread of 3mm dia.

Specification:-
Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the soil mass.the apparatus can be used to determine the shrinkage limit.

Specification:-
Enables the determination of liquid limit to be performed simply and quickly.

Specification:-
The liquid limit data of soil is used to correlate mechanical properties if soil such as compressibility and lower shear strength

Specification:-

The instruments used to determine specific gravity of clay, sand , and gravel of size smaller than 10mm.

Specification:-
This instruments is used to determine the dry density of natural and compacted fine grained soil free from aggregates. A cylinder cutter is used to extract a sample of the soil with the help of a dolley and rammer. from the weight density moisture the dry density is readily calculated.

Specification:-
Used for testing crushed rock , crushed slag, crushed and uncrushed gravel for resistance to abrasion.

Prism pole tripod is made from aluminium extruded pipe that makes it durable and light in weight. the tripod is painted in yellow and black color which protects it from different weather conditions also it gives a snazzy.

Special Features :-

High quality workmanship. Painted with best quality paints. Strong high tensile aluminium alloy.

trip Interchangeable die cast tripod parts. Easy carrying shoulder strap.

Parameters al24 al32 a-32standard deviation per kilometer double - run 2mm 1mm 1.5mmimage positive image positive image positive imagemagnification 24x 32x 32xclear objective aperture 36mm 36mm 36mmfield of view 1o20 1o20 1o20shortest focusing distance 0.4 m 0.65 m 0.4 mstadia multiplication constant 100 100 100stadia additive constant 0 0 0circular bubble precision 8 2mm 8 2mm 8 2mmhorizontal circle 360o 360o 360ocompensator type air suspension -damping air suspension-damping magnetic suspension-dampingworking range 15 15 15setting accuracy 0.3 0.3 0.3screw thread m16 or 58 m16 or 58 m16 or 58.

We are the main supplier of this product.

Specification:-
These are available in different sizes and are made according to Indian and British standard.

Specification:-
It is designed to carry a load of 140kgs. The apparatus consist of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on the shaft of a vibrator clamped to the underside of the table top.

Specification:-

Vibrating machine consist of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame consist of a vice to hold a 7.06cm cube mould and two studs thread at the top and a hopper feed the sample in the mould.

Specification:-
A compression testing machine consist of a load frame with suitable platens and a pumping unit with pressure gauge either hand operated or electrically-cum hand operated.

We have a range of compression testing machine capacity from 10 tonnes to 200 tones in different models.

Specification:-
It is motorised mechanical unit. The speed is adjusted so that the load increases on the specimen is between 4 to 6 kg/sec. This instrument is used for testing 40mm x 40mm x 160mm mortar specimen for flexure by single point load.

Specification:-
Moisture content at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled ino thread of 3mm dia.

Specification:-
Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the soil mass.the apparatus can be used to determine the shrinkage limit.

Specification:-
Enables the determination of liquid limit to be performed simply and quickly.

Specification:-
The liquid limit data of soil is used to correlate mechanical properties if soil such as compressibility and lower shear strength

Specification:-

The instruments used to determine specific gravity of clay, sand , and gravel of size smaller than 10mm.

Specification:-
This instruments is used to determine the dry density of natural and compacted fine grained soil free from aggregates. A cylinder cutter is used to extract a sample of the soil with the help of a dolley and rammer. from the weight density moisture the dry density is readily calculated.

Specification:-
Used for testing crushed rock , crushed slag, crushed and uncrushed gravel for resistance to abrasion.

Prism pole tripod is made from aluminium extruded pipe that makes it durable and light in weight. the tripod is painted in yellow and black color which protects it from different weather conditions also it gives a snazzy.

Special Features :-

High quality workmanship. Painted with best quality paints. Strong high tensile aluminium alloy.

trip Interchangeable die cast tripod parts. Easy carrying shoulder strap.