Verified
Write a Review
Our Products
Metal Flanges
2 Products availableSocket Weld Fittings
2 Products availableOur Complete range of products are Stainless Steel Blind Flange, Stainless Steel Lap Joint Flange, Stainless Steel Long Weld Neck Flange, Stainless Steel Orifice Flange and Stainless Steel Reducing Flange.
This flange is a solid circle drilled to match a companion flange. Used to shut off or blank off piping.
Grades:
Bored slightly larger than the OD of the pipe, the radius on the bottom matches the radius on the stub end. It is slipped over the pipe and a stub end is welded onto the pipe. The flange is then slipped over the stub end and bolted up. Used for systems that need frequent cleaning and/or inspection.
Grades:
Long Wel-Neck is same as weldneck flange with only difference in length of flange. LWN flange having extra length. Besides of above, we are experts in manufacturing customized flanges as per client drawing.
Grades:
Grades:
Grades:
The socket weld flange is bored to the ID of the pipe and counter bored slightly larger than the OD of the pipe to allow the pipe to be inserted and welded in place.
Grades:
Grades:
Grades:
Like Slip-on except bore of this flange is threaded to match the pipe size. Used for low pressure systems and where welding could be hazardous.
Grades:
The weld neck (or welding neck) flange is bored to the ID of the pipe and has a high neck to which pipe is welded. Probably the best welding flange available because of its high, heavy neck. Used wherever a sound welded joint connection is needed.
Grades:
This flange is a solid circle drilled to match a companion flange. Used to shut off or blank off piping.
Grades:
The weld neck (or welding neck) flange is bored to the ID of the pipe and has a high neck to which pipe is welded. Probably the best welding flange available because of its high, heavy neck. Used wherever a sound welded joint connection is needed.
Grades:
This flange is a solid circle drilled to match a companion flange. Used to shut off or blank off piping.
Grades:
Bored slightly larger than the OD of the pipe, the radius on the bottom matches the radius on the stub end. It is slipped over the pipe and a stub end is welded onto the pipe. The flange is then slipped over the stub end and bolted up. Used for systems that need frequent cleaning and/or inspection.
Grades:
The weld neck (or welding neck) flange is bored to the ID of the pipe and has a high neck to which pipe is welded. Probably the best welding flange available because of its high, heavy neck. Used wherever a sound welded joint connection is needed.
Grades:
The slip-on flange has a low hub and is bored slightly larger than the OD of the pipe. This flange is welded on both inside and outside of the flange face to prevent leakage. Used in lieu of welding necks when cost or space is a major consideration.
Grades:
