features

our turnout gears are manufactured under rigorous iso 9001 standards.turnout gears are also known as bunker gears or rather commonly as structural fire fighting suits.

material composition

outer shell:

6.0oz nomex iii a fabric.

moisture barrier:

aramid/kevlar non woven laminated with ptfe membrane for maximum breathability and hydrostatic head (waterproof) performance.(en 343 protection against foul weather)

thermal barrier:

constructed using non-woven aramide kevlar fibers laminated with nomex/viscose innermost ling fabric for maximum protection.

reflective tape:

2"width yellow-silver-yellow reflective trims installed at arm and legs, front, back and bottom on the jacket and pants to enhance high visibility of workers.

AlugenAluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards.

The fabric used to produce Alugensuits are from GENTEX's proprietary Dual Mirror/ FlexirAluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel.

AlugenAluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire.

The durability of Aluminisation on fabric can be confirmed by conducting a test named Wet Flex test.

The procedure goes as follows,

The fabric is dipped in 60C hot water for 15 mins and then 1000 machine abrasion cycles are conducted.There should be no delamination, or peeling off on any part of the fabric.

All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this.

GENTEX's proprietary Dual Mirror/ FlexirAluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.

features

our turnout gears are manufactured under rigorous iso 9001 standards.turnout gears are also known as bunker gears or rather commonly as structural fire fighting suits.

material composition

outer shell:

6.0oz nomex iii a fabric.

moisture barrier:

aramid/kevlar non woven laminated with ptfe membrane for maximum breathability and hydrostatic head (waterproof) performance.(en 343 protection against foul weather)

thermal barrier:

constructed using non-woven aramide kevlar fibers laminated with nomex/viscose innermost ling fabric for maximum protection.

reflective tape:

2"width yellow-silver-yellow reflective trims installed at arm and legs, front, back and bottom on the jacket and pants to enhance high visibility of workers.

AlugenAluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards.

The fabric used to produce Alugensuits are from GENTEX's proprietary Dual Mirror/ FlexirAluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel.

AlugenAluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire.

The durability of Aluminisation on fabric can be confirmed by conducting a test named Wet Flex test.

The procedure goes as follows,

The fabric is dipped in 60C hot water for 15 mins and then 1000 machine abrasion cycles are conducted.There should be no delamination, or peeling off on any part of the fabric.

All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this.

GENTEX's proprietary Dual Mirror/ FlexirAluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.