Industrial Air Conditioner & Devices #924503

Industrial Humidification System:

• Great wall design humidifier
• Built-in LED night lamp
• Anion humidifier
• Auto-off when water run out

Features:

• Great wall design for anion humidifier
• Twin mist-out mouth rotatable at 360 degree
• Waterless automatic protection
• Built-in night light for humidifier
• Optional filter to reduce the limes in the water
• Removable water tank with a wide mouth for easy filling

Packing:

• G.W/N.W: 2.58kgs / 2.10kgs
• Unit dimension: 2 4x26x36 cm
• Gift box: 27.5x27.5x39cm
• Qty: 4pcs/carton

Material : Water tank and fogging out are made of stainless steel, front control box is made of steel sheet.

Four major effects :

• Cooling the indoor temperature
• Indoor humidification
• Disinfection and medication prevention function
• High-efficiency dedusting

Industrial Humidifier  Applications:

Printing / Electronics / Plastic industry / Textile industry / Paint / Food industry / Farm and garden / Paper industry / Poultry house / Livestock/ Mushroom house, etc.

Simply operated, equipped with the water protection system, humidity control system and time control system.

The principle of the Ultrasonic humidifier"

Ultrasonic humidification use ultrasonic energy to break up water into small particles of size from a few μms to hundreds μms.

This humidifier is not noisy, no pollution, simply operated, equipped with the water protection system, humidity control system and time control system.

Installation

• Install in a clean air environment with little dusts."
• Connect the output pipe orifice in the main machine with the 110mm PVC pipe, which can lead to the workshop directly, or be punched several holes.
• A water filter should be equipped before the main machine. Water should be neutral and clean.
• Water level should be kept around 30mm higher than the surface of the atomizer transducer devices."
• It influences the atomization if the water level is too high or too low."

Notice

• Don’t move the humidifier and power line when it’s working.
• Don’t put your hand above the atomizer transducer devices when it’s working.
• Put the main machine in the place which is ventilated, try to keep away from damp and dust.
• The water level will change after working for a long time, adjust the water inflow float valve."
• The water level should be kept 30mm higher than the surface of the atomizer transducer devices.
• It is better to keep the working time under 10hours every day.

The High Pressure Humidifier  Contains

• Commercial High Pressure Pump
• Incoming Water Filter
• Stable Transformer
• Precise Timer Controller
• Aluminum Case, Copper Wire Electric Motor

Feature of High Pressure Humidifier

• Commercial/ Industrial Triplex Plunger Pump Is Equipped
• Operating Pressure Can Reach 150 Bar Max.
• High Accurate Humidity Sensor Controls The System
• High Efficient, Low Consumption Saves Your Payments
• Durable, Reliable Quality, Limited Maintenance Cost
• Water Tank Mounted

Application of High Pressure Humidifier

• Paper,   Printing,   Label  Industry
• Textile,   Leather  Factory
• Woodworking,   Wood  Storage
• Electronics  and  OTHERS

Simply operated, equipped with the water protection system, humidity control system and time control system.

The principle of the Ultrasonic humidifier"

Ultrasonic humidification use ultrasonic energy to break up water into small particles of size from a few μms to hundreds μms.

This humidifier is not noisy, no pollution, simply operated, equipped with the water protection system, humidity control system and time control system.

Installation

• Install in a clean air environment with little dusts."
• Connect the output pipe orifice in the main machine with the 110mm PVC pipe, which can lead to the workshop directly, or be punched several holes.
• A water filter should be equipped before the main machine. Water should be neutral and clean.
• Water level should be kept around 30mm higher than the surface of the atomizer transducer devices."
• It influences the atomization if the water level is too high or too low."

Notice

• Don’t move the humidifier and power line when it’s working.
• Don’t put your hand above the atomizer transducer devices when it’s working.
• Put the main machine in the place which is ventilated, try to keep away from damp and dust.
• The water level will change after working for a long time, adjust the water inflow float valve."
• The water level should be kept 30mm higher than the surface of the atomizer transducer devices.
• It is better to keep the working time under 10hours every day.

Features :

• NTC-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency.
• Humidity Setting 01%- 99%.
• Intelligent control, accurate humidity control : Humidity control system with imported world leading probe. The control precision is within + 5%.

• Easy to move, convenient to install, Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you.
• S.S. body clean and reliable equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.
• Clean fog generating plate weekly or half monthly.
• Note – Power supply should be proper. Our risk & responsibility ceases if electricity supply is not proper as per requirement. Use stabilizer/UPS for trouble free performance of the product.

The Industrial Humidifier (JDH-G060Z), that we provide, is high in performance and long in life. The Industrial Humidifier (JDH-G060Z) is strictly procured by us from renowned vendors in the industry, for ensuring its reliability. We are one of the chief Industrial Humidifier (JDH-G060Z) Importers and Suppliers in Nagpur (India).

Character : JDH-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency. Diameter of fog output is only1-10u. Maximum relative humidity reaches 99%. Intelligent control, accurate humidity control: Humidity control system with imported world leading probe. The control precision is within + 5%. Easy to move, convenient to install Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you. Stainless steel boy, clean and reliable Equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.

The company is known as one of the leading Industrial Humidifier (JDH-G030Z) Importers and Suppliers in India. Our Industrial Humidifier (JDH-G030Z) is highly demanded by national as well as international clients, owing to its efficiency. Procured from the renowned sources, our Industrial Humidifier (JDH-G030Z) is reliable and durable.

Character : JDH-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency. Diameter of fog output is only1-10u. Maximum relative humidity reaches 99%. Intelligent control, accurate humidity control: Humidity control system with imported world leading probe. The control precision is within + 5%. Easy to move, convenient to install Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you. Stainless steel boy, clean and reliable Equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.

Features

• NTC-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency.
• Humidity Setting 01%- 99%.
• Intelligent control, accurate humidity control:
• Humidity control system with imported world leading probe. The control precision is within + 5%.
• Easy to move, convenient to install, Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you.
• S.S. body clean and reliable equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.
• Clean fog generating plate weekly or half monthly.

We are ranked amidst the chief Industrial Humidifier (JDH-G150Z) Importers and Suppliers in Nagpur (India). The Industrial Humidifier (JDH-G150Z) is procured from renowned vendors in the industry only. This practice ensures that our Industrial Humidifier (JDH-G150Z) is high in quality and excellent in performance and life.

Character : JDH-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency. Diameter of fog output is only1-10u. Maximum relative humidity reaches 99%. Intelligent control, accurate humidity control: Humidity control system with imported world leading probe. The control precision is within + 5%. Easy to move, convenient to install Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you. Stainless steel boy, clean and reliable Equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.

We are a prominent Industrial Humidifier (JDH-G120Z) Importer and Supplier in India. Our Industrial Humidifier (JDH-G120Z) is acclaimed for excellent performance and long life. Procured from reliable sources in the industry, the Industrial Humidifier (JDH-G120Z) can be availed from us in bulk quantities and on urgent basis.

We are chiefly engaged in the importing and supplying of Industrial Humidifier (JDH-G180Z) all across the globe. Our Industrial Humidifier (JDH-G180Z) is acclaimed by global clients for its excellent performance. The Industrial Humidifier (JDH-G180Z) is available with us at the most competitive prices.

Character : JDH-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency. Diameter of fog output is only1-10u. Maximum relative humidity reaches 99%. Intelligent control, accurate humidity control: Humidity control system with imported world leading probe. The control precision is within + 5%. Easy to move, convenient to install Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you. Stainless steel boy, clean and reliable Equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.

Other details:

• Diameter of fog output is only 1-5 u. Maximum relative humidity reaches 99%
• Intelligent control, accurate humidity control
• Humidity control system with imported world leading probe. The control precision is within + 5%
• Easy to move, convenient to install, Able to move and able to be mounted on external wall
• Both automatic and manual humidify control are available
• Stainless steel body, clean and reliable
• Equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically
• High concentration of negative ions can be effectively suspended in the air to kill harmful bacteria and viruses, to clean up the air to reduce the occurrence of disease. Atomization process and the negative ion particles can compensate air

Intelligent control, accurate humidity control:

• Humidity control system with imported world leading probe. The control precision is within + 5%
• Easy to move, convenient to install, Able to move and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you
• Stainless steel body, clean and reliable

The Industrial Humidifier (JDH-G090Z), offered by us, is highly demanded amidst widespread clients. High in performance, our Industrial Humidifier (JDH-G090Z) imparts excellent performance. Being the chief Industrial Humidifier (JDH-G090Z) Importer and Supplier in India, we provide it at affordable prices.

Character : JDH-G series Ultrasonic mist humidifier adopts integrated mist module inside. The chip is replaceable. It is easy to maintain, and boasts high humidification efficiency. Diameter of fog output is only1-10u. Maximum relative humidity reaches 99%. Intelligent control, accurate humidity control: Humidity control system with imported world leading probe. The control precision is within + 5%. Easy to move, convenient to install Able to move, and able to be mounted on external wall. Both automatic and manual humidify control are available. It depends on you. Stainless steel boy, clean and reliable Equipped with standard water feeding gap, water release switch, overflow gap etc. The water feeding gap will fill water automatically.