Our Products #469049

Although they appear insignificant by the size and looks, P.V.C.Insulation Tapes play a very vital role in our lives, when it comes to SAFETY. Poor insulation can result in fi re hazards at your homes, offi ces and to electrical gadgets. Its just not worth taking a chance, and to give you that Peace of mind, we recommend E-FAB PVC tapes. Because, you deserve nothing short of the BEST. After all, your SAFETY and that of your loved ones should take top-priority.

• 5W & 9W
• 445 & 785 Lumen
• B-22 Holder
• Cool White
• Power Efficeint
• Long Lasting Life

'Good looks can at times be deceiving', goes the proverbial saying. Then, how do E-FAB Ceiling fans stand-out in comparison to other brands.

Good looks can at times be deceiving, goes on the proverbial saying. Then, how do E-FAB ceiling fans stand-out in comparison to other brands?

• Besides stunning looks, E-Fab fans are Energy Efficient and through computerized designs consume merely 50 Watts. This brings signifi cant savings in your monthly power bills.
• The aerodynamically designed and balanced blades contribute to optimum Air-delivery coupled with minimum air-cutting sound.
• Twin Imported Ball-Bearings ensure smooth running and a hassle-free performance in the long run.
• Effi cient after sales service.

Recommended fan sweep for rooms based on the following assumptions: Room is well ventilated.The gap between the ceiling and the blades is at least one foot. The height of the blade is not more than 8 ft from the fl oor. Size of the room Fan sweep in mms (inches) Upto 10x10 900 mm(36) or 1050mm (42) 10x10 1200 mm(48) 10x12 or 12x12 1400 mm(56) More than 12x12 suggested 2 or more suitable fans

In hot/dry place, recommended size is one bigger than indicated above For more than 2 fans in a room, the minimum distance between the blade tips of adjacent fans should be atleast 4 ft.

Electricity is a good servant but a bad master. Modern day usage of electricity is evident in all the spheres of life. Equipment, gadgets and machinery run by electricity are expensive and need a protective E-FAB . Conforming to IS/IET 60898-2002 E-FAB MCBs are designed to provide protection to all type of electrical installations for domestic, commercial and industrial applications. When the current fl owing through a thermal element is greater than the rated current, the bimetal defl ects to trip the MCB, thus providing protection against overload currents. When suddenly the line current erupts to many times the rated current, the magnetic element trips the E-FAB MCB instantaneously, thus providing protection against short circuit current upto 10000 Amperes (10 KA).In India, in industrial as well as domestic applications, voltage almost never reaches the desired 240V/415V level because of perennial power shortage against demand of power guzzling industry/ domestic appliances and mostly remains around or below 210 V/ 390-400V. Therefore, E-FAB MCB has been specially designed to operate at dual voltages of 230 V/400 V. Internationally, also, according to IEC 898, the network voltage of 230/400 volts has been standardized. This value, 230/400 Volts is to progressively supersede the values of 220/380 Volts and 240/415 Volts. In any case, relevant short circuit tests are carried our at 230+5% / 400+5% i.e. 241/420 V power frequency recovery voltage

E-FAB "MCB"MCB Breaking Capacity10000 A, 230/400 V, 50 Hz

Available in SP, SPN, DP, TP, TPN, FP 6 to 63 A, Isolators DP, TP, FP 40, 63 & 100 A

The housing and cover of E-FAB MCBs are injection moulded from special grade glass filled fire retardant polyester conforming to international standards. The contacts are designed to ensure very high conductivity/ low contact resistance, thereby resulting in low voltage drop and hence very low power consumption and temperature rise. The power loss per pole, calculated on the terminals is at least 30% less than the permissible power loss vide IS Ec 60898-200. Such low watt loss per pole helps to save a lot of power in bigger panels and electrical installations.

E-FAB MCBs are compact in size and uniform in dimensions covering the entire B Series and C Series from 6A to 63A. The MCBs are factory calibrated and tested for 4, 000 mechanical and electrical operations to ensure long term consistent operations and reliability at the users location.

E-FAB MCBs are easily installable on DIN rails of Distribution Boards by simply snapping on. They are equally easily removable with the help of a screw driver. A 25 sq.mm. box type terminal is provided both at incoming and outgoing terminals to accommodate incoming/ outgoing wires ranging from 1 sq.mm. to 16 sq.mm.

The new era group is one of the leading manufacturing and supplying company of high quality electrical wires from india.

the new era group is one of the leading manufacturing and supplying company of high quality ug cables from india.

E-Fab Sub-immersible (SI) Cables guarantee smooth functioning of your electric SI pumps, in domestic, industrial and agricultural applications.

We are offering rg 6 coaxial cables. Rg6 is the recommended coaxial cable for distributing signals from cable tv, satellite dish or from a roof-top antenna. The rg6 cable construction provides better sheilding than the older rg59 coax cable. Rg6 cables that we carry are triple or quad shielded.

Our Telephone cables are best suited for all telephone switch board applications in high rise buildings, offices, factories, hotels, hospitals, residential complexes etc.

E-Fab CCTV Siamese cable makes CCTV security camera installations quick and easy. The cable comes with both the BNC connector and the DC power adapter pre-installed. Precut CCTV cable is recommended for smaller installs. The cable is for use indoors only.