Our Product / Services
Commercial Vehicles & Three Wheelers
1 Products availableUrinals
1 Products availablePrefabricated Cabin
1 Products availableDustbin
1 Products availableOff Road & Earth Moving Vehicles
1 Products availableCrusher, Shredder & Presses
1 Products availableTrucks
1 Products availableComputer Networking Services
1 Services availableStorage Tanks
1 Products availableWe are leaders in the market for providing best range of Suction Van, Open Ditch Cleaner and jetting machine
Our uniquely designed FRP urinal is available in variants like two seater and single seater for ladies and gents. The specialty of FRP urinals is occupies very less space hence easy to installed at road side without any disturbance to road traffic. Equipped with storage water tank to ensure cleanliness. These urinals will definitely enhance the essential facility to human beings of cities, town and small villages. These FRP urinals are easy to relocate in case of any problem with existing installed location. These FRP urinals have been manufactured and fabricated using very much tough and tensile quality raw materials which provides to it a long lasting lifetime as well as reliability.
Suction van is useful equipment for the use of cesspit and drain clearing ranging from tank capacity of lcv mounted 2000 , 3000 and 5000 litre capacity and tractor trolley mounted of 3000 litre capacity as also available. This equipment is ideal for emptying of septic tanks surcharged manholes, gulley pits for both liquid, solids and slurry materials
Features of suction van are as follows.
It is capable of sucking particles up to 40 to 50 mm in diameter and from a distance of 100 feet and a depth of up to 25 feet.
The capacity of the vacuum emptier tank is 2000 ltrs. To 8000 ltrs. As per the specific requirement.
Can clean sewer lines, storm drains, cess pits, septic tanks, where normally manual cleaning is impossible due to inhuman conditions and poisonous gases.
Maintenance is virtually nil for the first few years.
Easy to operate as no special skill is required.
Cleans blockage from the most inaccessible points.
Reduction of labour-oriented method of cleaning, thus upgrading dignity of labour.
Can be customised to suit any clients requirement.
It is available on trailer, three wheeler, lcv, mcv, and hcv truck chassis as per the specific requirement.
Model | Vehicle gvw | Volumetric capacity | Drive for vacuum pump |
3000 lt | Tractor trailer of 4 m.t. | 3000 litre | Auxiliary engine |
3000 lc | Truck chassis of 7 m.t. | 3000 litre | Vehicles auxiliary pto |
4000 lc | Truck chassis of 9 m.t | 4000 litre | Vehicles auxiliary pto |
6000 lc | Truck chassis of 11 m.t | 6000 litre | Vehicles auxiliary pto |
8000 lc | Truck chassis of 15 m.t | 8000 litre | Vehicles auxiliary pto |
open ditch cleaner is useful equipment used for cleaning / de-silting of road side nallahs / open drains. The machine is after being parked parallel to the nallahs / open drains scoops the silts and other floating bodies from the nallahs / open drains and collect the same in the tipping hopper.
This collected silt can be discharged in other transport vehicle or on a land fill area at desired location.
Salient features
All operation of de-silting of open nallahs / drains is performed without direct touching to silt by any human body.
Developed on tractor robust designed trailer chassis.
Back-hoe extension along with operator enables perfect alignment of the equipment to the nallahs / open drains.
Back-hoe can be rotated by 90 to its own axis along with operator to scoop and discharge the slit in collection hopper.
Approximately 50 kg capacity of the bucket will reduce the operational time.
No need of equipment to be transported to the slit discharging point after every filling of hopper it can be discharged in other transport vehicle directly.
Operated on 40 hp ( min ) tractor pto no need of auxiliary drive for the hydraulic pump.
Tippers Garbage tipper is available in a fully covered body, making it ideal for the transportation of waste material. Built with high-quality mild steel and incorporating hydraulic cylinders for tipping, the garbage tippers are available in various capacities. Our tippers are typically designed considering the garbage handling. Tipper body is fabricated to suit to the unloading on ground or garbage dumping and directly in the compactor as per customer requirements. These tippers also fabricated closed or open type as the demand.
Tipper can be mounted on 1000 kg pay load capacity vehicles to 8000 kg pay load capacity vehicles. Lcv mounted tippers are designed considering the door to door collection of the garbage.
The dumper placer ( skip loader )is an efficient multi modal transport solution, where hydraulically operated lifting device is used for loading of the garbage container on to the truck. On the unloading point either the garbage container can be tilted the materials inside the container can be disposed off through tilting operation.
The container can be handled of closed or open top depending upon the need of end user. Skip loader is useful equipment for garbage handling, industrial waste (like hazardous chemical handling), scrap handling however, the equipment can be used many special application for disaster management, defence organization.
Dumper placer is available in two following type of transport medias
1. Vehicle chassis mounted
2. Tractor trailer mounted
Dumer placer vehicle chassis mounted
Dumper placer is developed on lcv, mcv and hcv truck chassis and depending upon the container capacity is meant for all small or big waste collection areas.
Description:
Chassis mounted rear end loading compactors, of 14 & 18 m3 with a universal bin lifter and a dumper placer arm mounted on 16 ton & 25 ton GVW chassis resp.
Application:
Ideal for minimising collection and transportation of municipal solid waste. Various capacities enables the deployment of machines from main roads to narrow lanes. The UBL makes it compatible to all bins as per Din 840 std. low hopper height enable manual loading, besides its also capable of liftingskips / open top containers, ranging from 3 to 4.5 cum
Multi jet systmLcv mounted is a multi-purpose high pressure sewer jetting machine suitable for effective and efficient cleaning of choked underground drainage and sewer lines. This multipurpose jetting system can be used for following various activities
Drainage clearing
Vehicle cleaning
Pesticide spraying.
Water spraying on road
Features
It can effectively clean sewer lines having a diameter up to 3"-7".
The pressure exerted by the pump is 200 bar @ 13 lpm
It can also be easily used in narrow lanes.
Need very low water
Vehicle chassis mounted
High pressure water jetting sewer cleaning machines of varying tank and pump capacity mounted on trailer or chassis ideal for de-silting and de-chocking of both man entry & no-man entry sewers using the concept of high pressure water jetting
Can clean sewer lines and storm drains, where normally manual cleaning is impossible due to inhuman conditions and poisonous gases.
Much faster and thorough cleaning of sewers.
Clears blockages and settled debris from the most inaccessible points in sewer line and storm drain.
Easy to operate as no special skill is required.
Elimination of man-entry oriented method of cleaning, thus upgrading dignity of labour.
Effective for all sizes of sewer lines and storm drains.
Can be customised to suit any clients requirement.
Very cost-effective owing to cheapest costs per km. Of sewer line cleaned.
Specifications Of Jetting Machine
Model | Vehicle gvw | Volumetric capacity | Drive for vacuum pump |
3000 lc jet | 7 m.t. | 3000 litre | Vehicles auxiliary pto |
4000 lc jet | 9 m.t. | 4000 litre | Vehicles auxiliary pto |
6000 lc jet | 11 m.t | 6000 litre | Vehicles auxiliary pto |
8000 lc jet | 15 m.t | 8000 litre | Vehicles auxiliary pto |