New India Electricals Limited Bangalore, Karnataka

Centrifugal Pumps are by far the most commonly used pumps in the industry. We have more than 20 different types of centrifugal pumps to offer based on specific requirement, application, capacity and site conditions.

Types of Centrifugal Pumps Monoblock Pump, Open Well Submersible Pumps, Bore Well Submersible Pumps, Self Priming Pump, Slurry Pumps, End Suction Back Pullout Pumps, Horizontal Split Casing Pumps, In Line Multistage Pumps, Process Pumps, Solid Handling Pumps, Non Clog Pumps, Submersible Sewage Pumps, Mix Flow Pumps, Vertical Turbine Pumps.

Applications Irrigation, Agriculture, Water Supply, Municipal and Town Water Supply, Sewage, Muddy Water, Petroleum Products, Light Oils, Slurry, Liquids With Suspended Solids, Air Conditioning, HVAC, Fire Fighting, Condensate Water, Boiler Feed, Water Purification & RO Systems, Sugar Syrup, Paper Pulp, Brine, Oils & Chemicals, Effluents, Viscous & Contaminated Liquids, Marine Dewatering, Sprinkler Irrigation etc.

Gear pumps are positive displacement Pumps, a popular pumping principle. These are often used for pumping lubricating Liquids, Oils, and other Viscous Liquids. Gear pumps come in either single or double (two sets of gears) pump configurations with spur (shown), helical, and herringbone gears. It is well known that, Helical and herringbone gears typically offer a smoother flow than spur gears, though all gear types are relatively smooth. For this reason, our large-capacity gear pumps use helical or herringbone gears. The small external gear pumps typically operate at 1750 or 3450 rpm whereas the larger models operate at lower speeds. Both sides of the gears have close tolerances and shaft support of the gears. This enables them to operate to pressures beyond 3, 000 PSI / 200 BAR, making them well suited for use in hydraulics. Closer & tighter internal clearances ensure a more reliable measure of liquid passing through a pump and allow for greater flow control. Owing to this, gear pumps are always preferred for precise transfer and metering applications involving Polymers, Fuels and Chemical Additives.

IL Series are Vertical In-Line Multistage Pumps. Specially designed with pressed stainless steel components, these pumps have high efficiencies. All wetted parts are in SS304 or SS316 construction. By default pumps are supplied with Mechanical Seal. These pumps have many applications including Booster, Fire Fighting, HVAC, Boiler Feed, Condensate/DM Water, Water Purification, RO Systems and Drip and Sprinkler Irrigation.

BHR Series pumps are Vertical Turbine Pumps which are constructed rigidly to ensure vibration free operation. Pumps are designed for Dry pit/Wet pit arrangements. Pumps are offered with Radial, Axial, and Mixed flow impellers depending on specific requirements. Pumps Hydraulic design are updated with continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design. These pumps are used in Lift Irrigations Schemes, Water Supply, Dry Docks, Refineries and Fire Fighting.

DSM series pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute. The impellers are centrally placed on a sturdy designed shaft and the entire rotating assembly is dynamically balanced to provide a smooth, trouble free, longer and efficient operation. The horizontal split casing design allows dismantling and maintaining the entire rotating assembly without disturbing the piping connections. Pumps are highly Reliable and Sturdy requiring minimal maintenance. Pumps are offered in a wide variety of Materials & sealing options. These pumps are used for Municipal & Town Water Supply, Irrigation Schemes, Large Cooling Towers, Fire Fighting, Air Conditioning etc.

FTMP Series pumps are compact size and flange mounting positive displacement Trochoid gear pumps. To ensure low noise and compact design these pumps have been designed based on Gerotors. The accuracy of the gerotors, ensures the whole pump assembly becomes compact and absolutely free from any noise. Owing to the design and utility these are used widely where minimum flow of liquid is required to be maintained. Based on mounting, these pumps are made of flange type usually.

These pumps can be operated up to pressures of 10 kg/cm with 0.5 LPM to 40 LPM flow capacity and viscosity range of 10 to 1000 CST.

FTMP Monoblock pumpSimple and compact designs of Monoblock pumps are available in this model. The Monoblock version makes them very easy and portable and space saving.

FIG Series Pumps are high precision and fuel pressuring type positive displacement internal gear pump. Pumps casing is of cast iron construction and the gears are alloy steel. These pumps are self priming & produce maximum vacuum, determined by the cavity between the gear teeth. These pumps are suitable for liquids up to 500 CST viscosities and up to a temperature of 200C. Pumps are supplied with mechanical seal to ensure zero leakage. The suction and delivery connections are available in 3/8, 1/2, 3/4and 1 size. FIG series pumps have a capacity Range of 150 LPH to 6000 LPH with operating pressure up to 35 kg/cm. Pumps can be offered in clockwise or anti clockwise directions, as per customer requirements.

RDMS Series pumps are heavy duty foot mounting type positive displacement rotary twin gear pump. Pups are all stainless steel (SS-316) in four piece construction with investment cast. Due to four piece construction it can be easily cleanable and maintainable. These pumps have a double helical refined SS-316 gear shaft that is nitrated to give longer life. The Double helical gears prevent axial and side thrust which help increase life & performance of the pump. The Teflon coated, dry running DU bush bearing, supported on bronze wearing plate is placed inside the pump casing. These are a variation of the RDRN type pumps. These pumps are provided with add-on type pressure relief valve. Additional Steam / Water jacketing construction can be made available to facilitate heating of the pump by steam or thermic fluid etc for pumping special liquids that tend to solidify at lower temperatures. The stuffing box is fitted with GFO pack sealant with provision to fit mechanical shaft seal. With flanged end connections these pumps are available in sizes from 1/2 to 6. Like our other pumps these pumps can be operated up to pressure of 10 kg/cm with 13 LPM to 1335 LPM flow capacity. These pumps are suitable for maximum viscosity up to 1, 00, 000 SSU and a maximum temperature up to 200c.

HGSX Series pumps are self priming, foot mounting type positive displacement rotary gear pump. HGSX Series are all Stainless Steel (SS-316) in three piece construction with investment cast. Due to its three piece construction, it is easily cleanable and maintainable. It is widely used in all kind of food industries due to these qualities. Our HGSX pumps are made with SS-316 Gear and shaft that are treated to give long life and trouble free performance. Self lubricating type Teflon coated DU bushes ably support the shaft and Teflon based GFO pack sealant which gives zero leakage. The mounting brackets facilitate foot mounting of the pump at right angle to the base plate and facilitates easier mounting with Electric Motor of appropriate ratings. These pumps have sturdy design and construction for long trouble free service. The range of suction and delivery connection are available in 1/4 to 2 size. These pumps can be operated up to pressure of 10 kg/cm with 8.33 LPM to 300 LPM flow capacity and has suction lift of 1m to 5m at rated speed of 1440 RPM. The pump design allows it to handle maximum Viscosity of 100000 SSU and maximum temperature of 200C.

Vertical in Line Multistage.