)High quality fitting adapters.2)Resonable price.3)Ontime delivery.

• Standard quick response with Standard & extended coverage
• Pendent, upright, recessed pendent, horizontal sidewall & concealed sprinkler
• Temperature ratings :57, 68, 79 & 93C
• K- factor 5.6 and 4.2
• Brass Chrome or white / custom colour finish
• Approval :UL

• Hose :Corrugated Size?
• Size :1/2
• Length :780 to 1500 mm
• Accessories :Square support bar & Bracket
• Approval :UL

• Construction :CI / CS / DI / Al. Br.
• Max Pressure :12 Bar
• Size :80 NB to 200 NB
• Accessories :a) Wet / Dry Pilot Trimb) Water Motor Gong
• Approval :UL

• Construction :Brass / SS
• K Factor :18 to 102
• Spray Angle :65 to 140
• Inlet Connection :1/2" BSPT / NPT
• Finish :Natural Brass / Chrome Plated / Epoxy Powder Coated
• Approval :UL / FM

• Construction :Brass / SS
• K Factor :23 to 140
• Inlet Connection :??"? /? ?? "
• Finish :Natural Brass / Chrome Plated Brass

Featurers :
A) Powered by GVPC
B) 85 DB @ 10 Feet
C) Low Battery Single
D) Self Testing Facility
E) Meets UL Standard 217

• Technical Specifications :
• Type :Fix
• Size :Inlet 20mm (25mm BSP Threaded)
• Material of Construction :
• Hub Sides & Wall Bracket :M.S. Sheet of IS:513
• Pipe with Fitting :Steel
• Hose Reel Tubing :Thermoplastic Hose (IS:12585)OR Rubber Hose (IS : 444)
• Performance Test :
• Hydrostatic Test :Tested at 21 Kgf/ cm
• Water Flow rate test at 7 Kgf/sq. cm :(A) Discharge : More than 30LPM(B) Range (Jet Lenght) : More Than 11mtr (min)
• Features :
• Side Plates :Made Of High Quality Mild Steel, Powder Coated In Red Colour
• Drive :12 / 24 VDC Rewind Motor / Manual

• Construction :M.S/S.S./FRP
• Accessories :Lock & Key , Door frames fixed with glass/acrylic sheet.
• Fixing :Wall mounting type & ground mounting stand available (optional)
• Models Available :Hose cabinet suitable to accommodate.
• Optional :Special Imported Locks / Handle.
• Items & Qty.15 mtrs long Hose With Coupling1 to 8Nozzle of 63 mm die1 to 8Hydrant Key1 to 4

(Also available in special sizes & construction to accommodate fire hydrants/hose reels & other accessories as per customers requirements)

• Technical Specifications :
• Type :Swinging 180 Wall Mounting
• Size :Inlet 20mm (3/4" BSP Thread Size)
• Conforming Specification :IS 884
• Material of Construction :
• Hub Sides & Wall Bracket :M.S. Sheet of IS:513
• Pipe with Fitting :Steel of IS:1239 Part I
• Hose Teel Tubing :Thermoplastic Hose (IS:12585)Rubber Hose (IS : 444)
• Performance Test :
• Hydrostatic Test :Tested at 21 Kgf/ cm
• Water Flow rate test at 7 Kgf/sq. cm :(A) Discharge : More than 24LPM(B) Range (Jet Lenght) : More Than 6mtr (min)
• Features :
• Side Plates :Made Of High Quality Mild Steel, Powder Coated In Red Colour
• Side Plates O.D. (diameter) :495mm/ 560mm (22")
• Distance Between Side Plates :6" (for 20mm)
• Waterways :Made From Non-ferrous Metal (aluminium Alloy) For Making It Corrosion Resistant, Duly Powder Coated.
• Fire Hose :High Quality Semi-rigid IMI ISI Marked (type-1 Or Type-2) Thermoplastic Hose With 2 Years Guarantee.
• Hose Colours Available :Red / Black
• Hose Nominal Bore (id) :20mm / 25mm, As Per Requirement.
• Hose Length :20 / 25 / 30/ 36 /40 Mtrs, As Per Requirement.
• Shut-off Nozzle :Rotary Operated Leak Proof, Shut-off Nozzle With Shut, Spray & Jet Functions Made Of Super-tough Polymer Alloy In Red Colour Optionally, Gun Metal/SS Shut-off Nozzle Also Available.
• Swivel :180 Double Swivel.
• Working Pressure :1.2 Mpa (12 Bar)

• MOC :MS / SS
• PVC / Rubber Hose : Suitable to accomodate 8mm to 25mm dia hose up to 30 mtrs long
• Working Pressure :15 Kg to 30 Kg f/cm Max
• Inlet :3/8" / 1/2" / 3/4" / 1" dia Rotary type
• Application :Compact Vehicles Cabins / car service Centres

• Hose Colours Available :Red / Black
• Hose Nominal Bore (id) :20mm / 25mm, As Per Requirement.
• Hose Length :20 / 25 / 30/ 36 /40 Mtrs, As Per Requirement.
• Working Pressure :1.2 Mpa (12 Bar) 6 BAR Or 10 BAR
• Approval :ISI Type I / Type II

Featurers :
A) MS / PVC Body
B) Break Glass / Press Glass Activation
C) Self Test Key
D) Options :
1 Hammer
2 IP Enclosure
3 CE / LPC / UL Approval

• Testing Capacity :Upto 5000PSI
• Optional Accessories :1) Manifold System to test multiple Cylinders.2) All size Adapters / Plugs to suit all types of extinguishers3) Testing Bench Vice4) Testing Case / Cage.

• MOC :FRP / SS / MS (Anti corrosive accommodate 1 or 2 lengths)
• Capacity :100 Ltrs to 500 Ltrs
• Trolley :Made pf M.S. Duly painted / SS Frame also available
• Wheels :Rubber Bonded trolley tyres 250 / 500 kgs rating each
• Standard Fittings :a) Foam inductor of 225 / 450 / 900 LPM capacityb) Low expansion branch pipe matched to above inducerc) Foam stop valved) Filler cape) Alternative fittings : Any type of foam branches including low expansion & medium expansion with their matched inductor
• Inductors :Aluminium / GM /SS
• Foam Branches :Aluminium / SS
• Optional :Storage Box provided to accomodate 1 or 2 lengths of hose with coupling as per desired specification supplied along with the unit

These foam branch pipes are designed to produce long coherent hrows of low expansion foam using all types of foam concentrate. They are designed to match NEC inline foam inductors.

• Construction :-
• Body :Light alloy alluminium / ss
• Inlet fittingss :Gun metal / Aluminium available in Instantaneous / Threaded / Storz / Buyonet or any marine / BBS standards on /request
• Handles :Aluminium handle or any ring type handle around the nozzle
• Protection ring :Oil resistant Neoprene / Synthetic rubber.
• Flow Capacity :-
• Available in range of :225 / 450 / 900 1pm at 7 kgf / cm2

• Specifications :
• Capacity :Upto 4000 gallons
• Compatibility :With all foam concentrates
• Construction :CS/ SS304 / SS316
• Tank construction :As per IS / ASME codes
• Anti Corrossion Treatment :Hot Dip Galvanising / Spray Galvanising (Inside)

)High quality fitting adapters.2)Resonable price.3)Ontime delivery.

• Standard quick response with Standard & extended coverage
• Pendent, upright, recessed pendent, horizontal sidewall & concealed sprinkler
• Temperature ratings :57, 68, 79 & 93C
• K- factor 5.6 and 4.2
• Brass Chrome or white / custom colour finish
• Approval :UL

• Hose :Corrugated Size?
• Size :1/2
• Length :780 to 1500 mm
• Accessories :Square support bar & Bracket
• Approval :UL

• Construction :CI / CS / DI / Al. Br.
• Max Pressure :12 Bar
• Size :80 NB to 200 NB
• Accessories :a) Wet / Dry Pilot Trimb) Water Motor Gong
• Approval :UL

• Construction :Brass / SS
• K Factor :18 to 102
• Spray Angle :65 to 140
• Inlet Connection :1/2" BSPT / NPT
• Finish :Natural Brass / Chrome Plated / Epoxy Powder Coated
• Approval :UL / FM

• Construction :Brass / SS
• K Factor :23 to 140
• Inlet Connection :??"? /? ?? "
• Finish :Natural Brass / Chrome Plated Brass

Featurers :
A) Powered by GVPC
B) 85 DB @ 10 Feet
C) Low Battery Single
D) Self Testing Facility
E) Meets UL Standard 217

• Technical Specifications :
• Type :Fix
• Size :Inlet 20mm (25mm BSP Threaded)
• Material of Construction :
• Hub Sides & Wall Bracket :M.S. Sheet of IS:513
• Pipe with Fitting :Steel
• Hose Reel Tubing :Thermoplastic Hose (IS:12585)OR Rubber Hose (IS : 444)
• Performance Test :
• Hydrostatic Test :Tested at 21 Kgf/ cm
• Water Flow rate test at 7 Kgf/sq. cm :(A) Discharge : More than 30LPM(B) Range (Jet Lenght) : More Than 11mtr (min)
• Features :
• Side Plates :Made Of High Quality Mild Steel, Powder Coated In Red Colour
• Drive :12 / 24 VDC Rewind Motor / Manual

• Construction :M.S/S.S./FRP
• Accessories :Lock & Key , Door frames fixed with glass/acrylic sheet.
• Fixing :Wall mounting type & ground mounting stand available (optional)
• Models Available :Hose cabinet suitable to accommodate.
• Optional :Special Imported Locks / Handle.
• Items & Qty.15 mtrs long Hose With Coupling1 to 8Nozzle of 63 mm die1 to 8Hydrant Key1 to 4

(Also available in special sizes & construction to accommodate fire hydrants/hose reels & other accessories as per customers requirements)

• Technical Specifications :
• Type :Swinging 180 Wall Mounting
• Size :Inlet 20mm (3/4" BSP Thread Size)
• Conforming Specification :IS 884
• Material of Construction :
• Hub Sides & Wall Bracket :M.S. Sheet of IS:513
• Pipe with Fitting :Steel of IS:1239 Part I
• Hose Teel Tubing :Thermoplastic Hose (IS:12585)Rubber Hose (IS : 444)
• Performance Test :
• Hydrostatic Test :Tested at 21 Kgf/ cm
• Water Flow rate test at 7 Kgf/sq. cm :(A) Discharge : More than 24LPM(B) Range (Jet Lenght) : More Than 6mtr (min)
• Features :
• Side Plates :Made Of High Quality Mild Steel, Powder Coated In Red Colour
• Side Plates O.D. (diameter) :495mm/ 560mm (22")
• Distance Between Side Plates :6" (for 20mm)
• Waterways :Made From Non-ferrous Metal (aluminium Alloy) For Making It Corrosion Resistant, Duly Powder Coated.
• Fire Hose :High Quality Semi-rigid IMI ISI Marked (type-1 Or Type-2) Thermoplastic Hose With 2 Years Guarantee.
• Hose Colours Available :Red / Black
• Hose Nominal Bore (id) :20mm / 25mm, As Per Requirement.
• Hose Length :20 / 25 / 30/ 36 /40 Mtrs, As Per Requirement.
• Shut-off Nozzle :Rotary Operated Leak Proof, Shut-off Nozzle With Shut, Spray & Jet Functions Made Of Super-tough Polymer Alloy In Red Colour Optionally, Gun Metal/SS Shut-off Nozzle Also Available.
• Swivel :180 Double Swivel.
• Working Pressure :1.2 Mpa (12 Bar)

• MOC :MS / SS
• PVC / Rubber Hose : Suitable to accomodate 8mm to 25mm dia hose up to 30 mtrs long
• Working Pressure :15 Kg to 30 Kg f/cm Max
• Inlet :3/8" / 1/2" / 3/4" / 1" dia Rotary type
• Application :Compact Vehicles Cabins / car service Centres

• Hose Colours Available :Red / Black
• Hose Nominal Bore (id) :20mm / 25mm, As Per Requirement.
• Hose Length :20 / 25 / 30/ 36 /40 Mtrs, As Per Requirement.
• Working Pressure :1.2 Mpa (12 Bar) 6 BAR Or 10 BAR
• Approval :ISI Type I / Type II

Featurers :
A) MS / PVC Body
B) Break Glass / Press Glass Activation
C) Self Test Key
D) Options :
1 Hammer
2 IP Enclosure
3 CE / LPC / UL Approval

• Testing Capacity :Upto 5000PSI
• Optional Accessories :1) Manifold System to test multiple Cylinders.2) All size Adapters / Plugs to suit all types of extinguishers3) Testing Bench Vice4) Testing Case / Cage.

• MOC :FRP / SS / MS (Anti corrosive accommodate 1 or 2 lengths)
• Capacity :100 Ltrs to 500 Ltrs
• Trolley :Made pf M.S. Duly painted / SS Frame also available
• Wheels :Rubber Bonded trolley tyres 250 / 500 kgs rating each
• Standard Fittings :a) Foam inductor of 225 / 450 / 900 LPM capacityb) Low expansion branch pipe matched to above inducerc) Foam stop valved) Filler cape) Alternative fittings : Any type of foam branches including low expansion & medium expansion with their matched inductor
• Inductors :Aluminium / GM /SS
• Foam Branches :Aluminium / SS
• Optional :Storage Box provided to accomodate 1 or 2 lengths of hose with coupling as per desired specification supplied along with the unit

These foam branch pipes are designed to produce long coherent hrows of low expansion foam using all types of foam concentrate. They are designed to match NEC inline foam inductors.

• Construction :-
• Body :Light alloy alluminium / ss
• Inlet fittingss :Gun metal / Aluminium available in Instantaneous / Threaded / Storz / Buyonet or any marine / BBS standards on /request
• Handles :Aluminium handle or any ring type handle around the nozzle
• Protection ring :Oil resistant Neoprene / Synthetic rubber.
• Flow Capacity :-
• Available in range of :225 / 450 / 900 1pm at 7 kgf / cm2

• Specifications :
• Capacity :Upto 4000 gallons
• Compatibility :With all foam concentrates
• Construction :CS/ SS304 / SS316
• Tank construction :As per IS / ASME codes
• Anti Corrossion Treatment :Hot Dip Galvanising / Spray Galvanising (Inside)