Neoz Energy

Bulandshahr Road Industrial Area, Ghaziabad, Uttar Pradesh

Casing centralizer of the bows calculated by our Engineers to make it performance exceed the API 10 D standards. Balancing the Starting Forces with the Restoring Forces taking care of the Running Forces makes it an apt product for today's severe downhole drilling conditions. The flexing of bows is critical most factor for these Centralizers and the bows undergo special state of flexing before assembly to ensure that they do not snap off under extreme stress conditions.

NeOz's Non Weld Bow Spring Centralizers are specially designed for vertical wells wherein low starting forces as well as high restoring forces are required.The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bowspring action.The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves.This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.

In this construction the bows of the Centralizers are welded onto the End Collars thus making it a Hinged Centralizer along with a Welded Construction.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be slip on to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

Similar to the Non Welded Centralizers, the Slip on Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.

Double Bow Spring Centralizers can be used in Deviated wells which require low running forces.These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. The construction is with Hinges and a Non Welded Bow.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.

The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.

Double Bow Spring Centralizers can be used in Deviated wells which require low running forces. These are designed to pass through tight spots and doglegs. The Double Bow Design makes these Centralizers act as a rigid centralizers under high side loads. In this construction the double bows of the Centralizers are welded onto the End Collars thus making it a Hinged Centralizer along with a Welded Construction.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.

Turbolizer Bow Spring Centralizers can be used in wells which help in generating turbulence in Cementing slurry during pumping operations.The turbo fins are specially made of high tensile steel. The construction is with Hinges and a Non Welded Bow.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.

Turbolizer Bow Spring Centralizers can be used in wells which help in generating turbulence in Cementing slurry during pumping operations. The turbo fins are specially made of high tensile steelIn this construction the bows of the Centralizers are welded onto the End Collars thus making it a Hinged Turbolizer along with a Welded Construction.

Using a Tubolizer Bow Spring Centralizer is a smart option over a regular bow spring centralizer which most operators prefer for better centralizers and greater cement bond.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

In this type of Centralizers the End Collars have hinges which makes it in two halves. This enables them to be assembled at site.
The bows are locked to the End Collars via a special locking mechanism. These centralizers can be shipped in half thus reducing the freight cost.

Turbolizer Bow Spring Centralizers can be used in wells which help in generating turbulence in Cementing slurry during pumping operations. The turbo fins are specially made of high tensile steelIn this type of Turbolizer the End Collars do not have any hinges hence these Centralizers can be slip on to the casing.This Centralizer is also available with Integral Stop(NE-B-18) wherein Set Screws are available on the End Collars. In this case the stop collars requirement is eliminated however this would not float on the casing

In this type of Centralizers the End Collars do not have any hinges hence these Centralizers can be slip on to the casing.The strong and high quality MIG welds make them similar to a one piece casing centralizer. These centralizers can be pre-installed on the casing before the running operations at the pipe yard itself.

The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar bow spring action. The Heat Treated bows enables these centralizer to provide best centralization as well as help in faster running of casing. The steel of these bows is a "special" made by combination or different metals to provide one of the best tensile strength as well as the "spring back" bow spring action.

Similar to the Non Welded Turbolizer Centralizers, the Slip on Turbolizer Centralizers exceed the API 10D Specifications. They also undergo the pre cleaning process which insures that the these centralizers can withstand high exposure to natural weather conditions without any danger of rusting. The Powder coating in the final process which gives the product a smooth finish and insures stocking in the open for a long time.

TheScratcho-N-Centralizeris a NeOz patent* centralizer designed By NeOz which is a single piece construction bow spring centralizer with the ability of an inbuilt scratch end ring, able to rotate on its axis which effectively cleans the bore hole walls by having clockwise and anticlockwise rotation and prepares these Walls for the ensuing cementing operation and at the same time permit the turbulent flow of cement up a known annular space at a minimum of pressure as well as providing a best centralization for a casing string.

Bow Spring Centralizer The specific hardness of the bows calculated by our Engineers to make it performance exceed the API 10 D standards. Balancing the Starting Forces with the Restoring Forces taking care of the Running Forces makes it an apt product for today's severe downhole drilling conditions. The flexing of bows is critical most factor for these Centralizers and the bows undergo special state of flexing before assembly to ensure that they do not snap off under extreme stress conditions. 'NeOz' NE-B Series Centralizers are specially designed for vertical wells wherein low starting forces as well as high restoring forces are required. The Bows of these Centralizers are heat treated in special furnace which gives it a peculiar 'bow spring' action.