Regular bodied, slow setting, HIGH PRESSURE, high strength cement.Specially formulated for all types of ISI PVC irrigation piping systems. It provides long working time to make joints in a hot climate.It can be used for conduit, sewer, drain, waste and vent systems.Compliant with ISI - IS14182 standard.Brookfield Viscosity : Min. 90 cPShelf life : 1 yearStore product below 44C (111F)
For PVC, UPVC (PVC-U) pipes up to 6"(160mm) dia.Store and use at temperature between 5C (40F) and 44C (1111).APPLICATION: Clean surrounding area of the leakage with cloth or rug. Cut appropriate size of provided flexible PVC sheet to cover the leak area. Cut the corners of flexible sheet in round shape for better bonding. Apply a layer of cement on pipe crack 1 leak area. Then apply layer of cement on flexible PVC piece, put the flexible PVC piece on crack leak area. Hold with hand pressure for 2-3 min. Let it dry for at least 4 hours before starting water. For better result let it dry for overnight.
Medium bodied, fast setting, high strength ABS solvent cement.Designed for all dames and schedules of ABS pipe and fittings through 8(200mm) diameter with interference fit.For plumbing application (DWV, sewer & drain), conduit and foam core.Meets ASTM D-2235 standard requirements.Brookfield Viscosity: Minimum 500 cPShelf Life: 2 yearsStore Product below 44C (111F)
egular bodied, slow setting, HIGH PRESSURE, high strength cement.Specially formulated for all types of ISI PVC irrigation piping systems. It provides long working time to make joints in a hot climate.It can be used for conduit, sewer, drain, waste and vent systems.Compliant with ISI - IS14182 standard.Brookfield Viscosity : Min. 90 cPShelf life : 1 yearStore product below 44C (111F)
Cleaner removes lubricant and dirt from the pipe & fitting surface and prepare the surface for bonding.For all classes and schedules (including Sch.80) through 241"(600mm) diameter.For potable water, plumbing, irrigation, conduit, sewer, drain, waste and vent systems.Meets SCAQMD Rule 1171 and Quality for LEED Green Building requirements.Brookfield Viscosity : Not Applicable (water thin)Shelf life : 3 yearsStore Product below 44C (111F
Regular bodied, slow setting, HIGH PRESSURE, high strength cement.Specially formulated for all types of ISI PVC irrigation piping systems. It provides long working time to make joints in a hot climate.It can be used for conduit, sewer, drain, waste and vent systems.Compliant with ISI - IS14182 standard.Brookfield Viscosity : Min. 90 cPShelf life : 1 yearStore product below 44C (111F)
Medium bodied, fast setting, high strength Low VOC CPVC solvent cement.Designed for all grades and types of CPVC pipe and fittings through 4 (110mm) dia. Sch.40 & Sch. 80 interference fit and SDR 13.5 & 11.For hot & cold potable water up to 82C (180F).Certified by NSF International for compliance with NSFANSI 14, ASTM F-493 & ASTM D-2846.Meets SCAQMD Rule 1168316A and Qualify for LEED Green Building requirements.Brookfield Viscosity: Minimum 500 cP.Shelf life : 2 yearStore product below 33C (90F)
Regular bodied, fast setting, slightly transition yellowish solvent base adhesive.
It is specifically made for joining Polyethylene, Polypropylene, HDPE, PVC, ABS and Styrene NON-PRESSURE DRAINAGE SYSTEMS through 6"(160mm) diameter. HVAC Duct applications through 12"(315) diameter interference fit.
When used properly, it will form a good contact bond between plastic drainage pipe surfaces for non-pressure applications.
It is not a solvent cement for solvent welding plastics.
Neo Flex Super Glue has proven superior performance over ordinary super glues. It works faster and holds stronger on more surfaces than ordinary instant adhesives. It dries clear and sets without clamping. It is resistant to moisture, most chemicals even at freezing temperatures.
Application: Twist off cap by turning counter-clockwise. Apply quickly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Clean excess adhesive with tissue paper and replace cap.