Neo Paintchem Pvt. Ltd.

Vaishali Nagar, Jaipur, Rajasthan

Cement Waterproofing Slurry A Cement based two component polymer rich system, which on mixing yield a brush able smooth slurry with excellent bond to most substrate.

• It is applied to concrete & Mortar structures to prevent water infiltration & dampness
• Easy to apply by brush, slurry consistency
• Improve bond strength on variety of surfaces
• Easy & Fast Mixing
• Reasonably Flexible to bridging up to 0.3 mm crack width.
• Protects against water penetration, salt & carbonation.
• Non-Toxics when cured, suitable for contact with drinking water
• Non-Corrosive to steel & iron.
• Allows surface to breath, preventing build up vapor pressure.     

Coverage: Depending on type of application, 2 coats are always required. The minimum recommended coverage of LARSEN CLEAN TECH WP 104 is 2.0 kg/m² for 1 mm thick coating, In extreme cases three coats may be required. 

Product Strengths:

• Can be diluted in water in any ratio
• Suitable for use with compact and porous materials 
• Suitable for delicate marbles
• No toxic substances released 

Certified, normal-setting, eco-friendly, self-levelling mineral product for the high-performance corrections of irreqular, uneven substrates, ideal for use in Construction, recyclable as in inert material at the end of its life.

Product Strengths:

SLC develops high levels of resistance to the solvent action of water, making it possible to correct large surface, also on external floors or those in contact with humidity to allow them to be overlaid with flooring using eco-friendly adhesives.

• Internal, external
• HDE technology with extended flow
• High dimensional stability and long-lasting performance
• High mechanical resistance
• Long self-levelling time, also suitable for large surface areas
• Suitable for laying ceramic tiles, vitrified tiles, natural stone hardwood floors and resilient materials using adhesives 

It is water based high performance universal root system specifically developed for long term protection of all types of roof surface.

• It is formulated on a complex blend of acrylic resins reinforced with inorganic fibers which offers outstanding weatherproofing and waterproofing properties.
• Optimum leves of UV resistance, flexibility, adhesion and durability for nay roof surfaces.
• Easy Application : Single  component - water based resulting easy application andcleaning of tools.
• Long term flexibility : Remain permanently flexible upon extended exterior exposure.
• Water Based : No V.O.C. environment friendly
• High Flim Build : High Volume Solids allows high build coating.

Certified, thixotropic, eco-friendly, normal-setting mineral levelling product for the high-performance correction and extended work ability of irregular substrates, ideal for  use  in  Construction. With  very low  volatile organic compound emissions, recyclable as an inert material at the end of its life. 

Product Strengths:

• Internal, external
• Suitable for laying ceramic and vitrified tiles, natural stone, hardwood floors and resilient materials using adhesives
• Prolonged work ability, also suitable for large surface areas
• High level of work ability for rapid and safe application
• High dimensional stability and long-lasting performance 
• High mechanical resistance 

Certified, mineral adhesive for high-performance, high-deformation layingor overlaying with no vertical slip, ideal for use in Construction, Single-component with very low volatile organic compound emissions, recyclable as an inert material at the end of life.

Product Strengths:

• Setflex EN 21 GR white contains pure white recycled raw materials and has reduced CO2 emissions
• Suitable for vitrified and ceramic tiles, large formats, low thickness slabs and stable natural stone
• Floors and walls, for internal and external use
• SAS and STC technology guarantee adhesion for real on-site conditions
• Suitable for under floor heating systems

Product Strengths:

• Internal, external
• Low water/cement ratio
• Mechanical performance superior to those of portland cements
• High dimensional stability and long-lasting performance
• Prolonged work ability both in the manual and mechanical laying 

Suitable Substrates

• Concrete walls & ceilings
• Clay brick walls
• Concrete hollow brick walls
• Cement block walls
• AAC Block walls

Coverage : Approx 6-9 ltrs of water are needed for an idel mix. Adjust the water content depending on the site conditions. (Coverage depends on the plumb, evenness of wall and mix consistency

Description:

• It is ready to use economical component for making hard floor surfaces.
• It is suitable for use in warehouse in engineering workshops, parking lots, garages etc.

Repairs it is based on synthetic rubber emulsion which providers good adhesion and water resistance to mortar/ concrete.

• Suitable old & new concrete bonding, water proofing screed concrete, waterproof slurry coating for repairing.
• Conforms to IS:2645
• Easy to use
• Non toxic
• Inhibits crack formation due to increased flexibility
• Seals small capillaries as a water proofing material improves the mechanical chemical resistance good binding property

It is a factory blend of carefully selected raw materials, portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light blocks or smoothing over the block work surface in layers of upto 12mm thickness, that  meet and  exceed the requirements of National and international Standards.

Advantages

• Long working time
• No curing required after block work is done
• Improved adhesion between two blocks
• Fast & economical 

Suitable Substrates :

• Concrete blocks
• Cement mortar blocks/bricks
• Concrete hollow blocks 
• Aerated light weight blocks
• Cellular concrete blocks
• Fly ash bricks

Coverage:  Approximately 125 sq.ft. per 40 kg. bag when used at 2-3mm bed thickness. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder 

Note: Coverage is based on the block size of 650mm X 240mm X 100mm