Our Products
Water Pump Parts
2 Products availableElectric Circuit Components & Parts
2 Products availablePower Supply System
1 Products availableGPS, Navigation & Tracking Devices
1 Products availableSoftware Development Service
1 Products availableNetworking Peripherals
1 Products availableLED, LCD, Smart TV & Home Theatre
1 Products availableOffice Automation Products & Devices
1 Products availableWe offer the best product range of dc voltage converter.
This product is designed to control two Air Conditioners(A.C. or A/C) simultaneously. The industry standard AVR Micro-Controller is the heart of this system. Control over the A/Cs are performed according to some parameters like temperature, phase voltage, phase current, swapping time etc. User can set or view various parameters like current temperature, phase current, phase voltage, temperature set-point, high room temperature, swapping time, A/C trip current, A.C. last trip reason etc. through a 16 x 2 character LCD panel and a status indication panel will help user quickly monitor the status of the A/Cs. An alarm system generates respective alarm for FMC if any error occurs in the operation. This system keeps the information of last AC trip reason and the overload current at which the Air Conditioner (A.C.) was last tripped in a nonvolatile memory for up to 100 years or the next trip occurs. This devise is fully compatible with VOLTAS SENSICOOL Air Conditioners (A/Cs) used in the shelter of a mobile tower
We are manufacturer of low cost GPS Vehicle Tracker at Kolkata, India. GPS based vehicle tracking system or GPS based VTS are commonly used by fleet operators for fleet management functions. Vehicle tracking system (VTS) are also popular in consumer vehicles as a theft prevention and retrieval device. Police can simply follow the signal emitted by the tracking system and locate the stolen vehicle.
GSM Part: | |
Network | GSM/GPRS |
Band | Quad-band: EGSM 900 / DCS 1800 and GSM 850 / PCS 1900 Mhz |
Transmitting Power | Class 4 (2W) at EGSM 900 / GSM 850 Class 1 (1W) at DCS 1800 / PCS 1900 |
GPRS Connectivity | GPRS multi-slot class 12/10 |
Data GPRS | GPRS data downlink transfer max: 85.6 kbps GPRS data uplink transfer max: 85.6 kbps |
GPS Part: | |
Channels | 22 tracking / 66 acquisition- channel GPS receiver |
Update Rate | Max 10 Hz |
GPS sensitivity | Tracking: -165 dBm Reacquisition: -160 dBm Cold starts: -147 dBm |
Max Altitude | < 60000 ft (18000m) |
Max Velocity | 1000 Knots ( 515m/s) |
GPS accuracy | < 2.5 m |
Acquisition Rate | Cold starts: 31s (typical) Open Sky Warm starts: 30s Open Sky Hot starts: < 1s Open Sky |
Storage Temperature | -40°C to +80°C |
Operation Temperature | -40°C to +80°C |
Humidity | 5%-95% non-condensing |
Input Voltage | 10 - 38V DC |
Inbuilt Battery (Only in advance) | Rechargeable 3.7V 1100 mAh Li-ion battery Standby 10 hours |
The short message system (SMS) of a standard mobile phone can be used for remote site monitoring and controlling various equipments. TheSMSservice provided by the service providers is comparatively very low cost. The Short Message Service allows text messages to be sent and received to and from mobile telephones. This feature of a standard mobile phone can be implemented for a variety of industrial applications. The main attractive feature of this system is that the user canmonitor and controlhis desired equipments from any part of the world. It works on the basis of Global System for Mobile Communication (GSM). The user may get the status of a remote device like pressure, temperature, voltage, current, On/Off condition, weight etc by sending respectiveSMSto the remote device. The remote device also automatically sends aSMSto the user if any error/alarm occurs during its operation, which is previously defined by the user. The user then may take the necessary action depending on the type of alarm through respectiveSMSor by any other way
Nelso Technologyhave introduced this device for your Child Safety. Its a Radio Frequency Identification Device (RFID) with cutting age technology. This device also GPRS enabled standalone and completely plug and play device for online student attendance. So it can be placed anywhere and compatible with any SIM card of any network. The device can trace network less than ten seconds and also has capability to change the network mode automatically in worst network area.
We provided SmartRFID Student Attendance Systems with SMSfor student tracking that track the child's attendance using a simple smart card. RFID tag will be attached to the student ID card and the information related to the student will be attached to the RFID tag. When the student enters the school and swipes the identity card, the reader at the gate will detect the tag and system will recognize the tag according the information stored as per the given record. Then the system will send notification SMS to the parents that their child has entered in the school and the same time the system will store the information for the report purpose. At the time of leaving the school premises, the student will swipes the RFID card once again at the gate and notification via SMS will be sent again to the parents and will also store the data