Neha Industries

Goregaon East, Mumbai, Maharashtra

Floor Gratings and Stair Treads by Neha Industries ensures easy and safe working, walking and wheeling surface. Bearing bars and cross bars are welded into one piece Grating with top of all bars being flush in one plane. Uniformity of material and design ensures trouble free services throughout the life of the Gratings. Factory tested and inspected Gratings gives the user full value for money. Gratings by Neha Industries are precise, graceful and symmetrical. They are available in many classic patterns, all of which are designed for strength, uniform wear and attractive appearance. Gratings are available in rectangular and zig-zag pattern, with member size and center distances (pitch) as per loading conditions.

• BEARING BAR SIZE25 x 3 mm.

They are available in many classic patterns, all of which are designed for strength, uniform wear and attractive appearance. Gratings are available in rectangular and zig-zag pattern, with member size and center distances (pitch) as per loading conditions. Gratings are mostly custom made as per the customers requirement and drawings. For the most techno-economical selection, specify NEHA INDUSTRIES for all your Gratings requirement.

Steel Floor Gratings, Stair Treads and Clamps Floor Gratings and Stair Treads by Neha Industries ensures easy and safe working, walking and wheeling surface. Bearing bars and cross bars are welded into one piece Grating with top of all bars being flush in one plane. Uniformity of material and design ensures trouble free services throughout the life of the Gratings. Factory tested and inspected Gratings gives the user full value for money. Gratings by Neha Industries are precise, graceful and symmetrical. They are available in many classic patterns, all of which are designed for strength, uniform wear and attractive appearance. Gratings are available in rectangular and zig-zag pattern, with member size and center distances (pitch) as per loading conditions. Gratings are mostly custom made as per the customers requirement and drawings. For the most techno-economical selection, specify  NEHA INDUSTRIES for all  your Gratings requirement. NEHA INDUSTRIES products are sold on the basis of guaranteed satisfaction to our valued customers.   FINISH  Gratings are available in various finish as under:   SELF COLOURED For quicker deliveries to customers, Gratings can be delivered without any coating. Gratings can then be primed and painted at site.   RED OXIDE    Gratings can be primed with red oxide for protection during transit and storage at site, before installation.   PAINTED Gratings can be primed and finish painted as per customer's requirement and specifications.   HOT DIP GALVANIZED    Gratings can be Hot Dip Galvanized as per Indian Standards (ISI), for protection from corrosion in damp environment.

Cable trays are used to support and dress the overhead cable installation. There are two types of Cable Trays namely;    Perforated Type Cable Trays   Ladder Type Cable Trays   Wire Type Cable Trays Perforated Type Cable Trays  are manufactured from steel sheets and have perforation on its surface for ventilation. They have bends on both the sides of 25-40 mm. The trays are normally manufactured from 16 G to 12 G sheets, and are of 2500mm in length. Two holes are provided at all the four corners for coupling it with the next tray. Ladder Type Cable Tray  are also manufactured from steel sheet, but have ladder type construction. They have two side channels with rungs at 250 mm c/c.          

Platforms at elevated levels are protected by Hand Railings at the periphery. We have in house facility to manufacture Pipes and we fabricate Hand Railings to customers drawings. Hand railings can be painted or hot dip galvanized as per project requirement. Toe plates  can be provided along with the railings.

Telescopic adjustable Steel props Props are manufactured from ERW Steel pipes and have adjustable length from 6.5’ to 13’. These props are manufactured from 60.3 mm OD outer member and 48.3 mm OD inner member. The thickness of the member is designed according to the required load carrying capacity. These props are type tested for the load capacity. We have load testing machine for demonstrating the load capacity. Props can be supplied with integral sleeve or welded sleeve as per customer requirement. The sleeve is treaded in house with acme treads in close tolerance.  The base plate at both the ends is of 6” x 6” x 6 mm thk. The props are provided with heavy duty nut and G-pin with wire rope. Props can be supplied with Painted finish or Hot Dip Galvanized finish. H-Frames and U-Frames H-Frames consist of welded frames, with 48.3 mm OD verticals braced together with scissor type cross braces secured by clips. They are used as access scaffolding in a high rise structure for wall plastering, painting, cleaning etc. H-Frames are available in widths of 900 mm, 1250 mm, 1800 mm and heights of 1000 mm, 1500 mm, 2000 mm. Cuplock Scaffolding Transoms ledgers with fittings at both ends lock into Cuplock housings or captive collar welded on the verticals at 500 or 1000 mm c/c to form Scaffolding or Staging. The main advantage is allowing change in working levels by removing and refixing Transoms ledgers at different levels without disturbing Scafolding. The erection and dismantling is easy, fast with only use of Hammer.