Our Product / Services
Steel Plates
2 Products availableCoal & Charcoal
2 Products availableSteel & Steel Products
2 Products availableLaces, Interlinings & Other Accessories
1 Products availableQuality Checking Service
1 Services availableOur Complete range of products are MPI MTU Calibration Block, Aluminum Calibration Block, Hastelloy Calibration Block, Inconel Calibration Block and Magnesium Calibration Block.
Used to test the sensitivity of Wet Method MPI Baths.
Quick and easy verification and comparison of magnetic particlematerialsThe MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials.Thistwo-sided block has a variety of indications ranging in size from small to large.Usethe MTU-3 to compare: fresh and used materials different brands of materials different types of materials (visible, dual sensitivity and fluorescent, etc.)Use the MTU-3 to verify: That aerosol cans are actually delivering particlesMTU-3 Blocks are prepared in accordance with the EN ISO 9934 2: 2002. Natural cracks on both sides Can be used with fluorescent or visible particles Supplied with reference photographSteel Disc - 50 mm in diameter by 11 mm thick, with a10.5 mmhole through the center
MPI MTU Calibration Block Used to test the sensitivity of Wet Method MPI Baths. Quick and easy verification and comparison of magnetic particlematerialsThe MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials.This two-sided block has a variety of indications ranging in size from small to large.Use the MTU-3 to compare
10 Step Block 7075 Aluminum (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
10 Step Block Hastelloy C276 (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"
10 Step Block Inconel 600 (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"
10 Step Block Magnesium (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"
10 Step Block Titanium (Metric 10A) 10 Step Calibration Block Metric 1 Type: The Metric 10A- 10 Step Calibration Block has steps starting at 2.0mm to 20.0mm in 2.0mm increments. Metric Step Face: 20mm x 20mm
10 Step Block 90/10 Copper Nickel (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"
DC Block 1018 Carbon Steel (Inch Version) AWS type DC calibration Block Geometry:1.0" radius overlaying a 2.0" radius on a 180 segment. In accordance with ASTM E164 and BRR/AWS X-1 specifications.