Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

NA

NCL ALLTEK & SECCOLOR LTD
location Basheerabad, Hyderabad, Telangana

Write a Review
Call Now Call Now

Our Products

  1. Plaster 13 Products available

  2. Unisex Clothing

    2 Products available

  3. Wall Tiles

    1 Products available

Our Products

NCL Harmony Wall Plaster

NCL Harmony Wall Plaster
  • Sp. Gravity 1.3
  • pH 7 to 8
  • Toxicity non-toxic
  • Shelf life 12 months in unopened container.
  • Surface drying 10 to 15 min @ 30 degrees centigrade temperature.
  • Recoating time 4 hrs at normal temperatures.
  • Coverage 60 to 80 Sq.ft/lit. may vary depending upon substrate condition.
  • VOC Negligible less than 5%.

NCL harmony is an exterior grade emulsion paint specially formulated to give smooth exterior wall paint finishes in various colourful shades.
NCL harmony paint is specially formulated offering water resistance, U.V resistance, and resistance to common fungus and algae. NCL harmony paint has good surface adhesion because of the good acrylic binding medium. NCL harmony also has dry film protective agents giving many years of surface protection.
NCL harmony paint is applied in two coats over cement plastered and primed exterior surface.

 
FEATURES  
Features
  • Exterior, economical emulsion paint.
  • Smooth finish.
  • Easy application with a brush / roller.
  • Good coverage.
Colour White & Colours as per the shade card.
Packing 20/10/4/1 lits. plastic buckets.
Surface preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Dilution Dilute 1 Litre of Harmony with 1 Litre of water for first coat and 500ml. of water for second coat.
Application
  • Apply the material on primed dry surface with a paint brush / roller in two coats.
  • Allow good surface drying.
View Complete Details
Ask Latest Price & Details
Roof Coat

Roof Coat
  • Ph: 7.5 to 8.5
  • Toxicity Non – toxic
  • Shelf life 6 months in unopened container
  • Storage Clean dry place without explosure to sunlight.

Alltek roof coat is specially formulated waterproofing material in a simple ready mixed paste form for direct application over roof tops, exterior walls, water tanks etc.

allek roof coat being single component in paste form has convenience & simple application procedure and does not require waterproofing specialist to handle the job.

Alltek roof coat has good surface adhesion and flexibility to withstand normal thermal movement.

 
FEATURES  
Features
  • Acrylic based.
  • Very simple application.
  • Excellent surface adhesion.
  • Good coverage & economical.
Colour White
Packing 25/5/1 kg bag.
Coverage Approx. 20 sft/kg.
Surface preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Dilution Apply the material as supplied. When required add little water for dilution.
Application
  • Clean the surface.
  • Apply the material on dry surface with paint brush / roller in 2 - 3 mm thickness.
  • Allow good surface drying for 72 hours.
View Complete Details
Ask Latest Price & Details
Wall Tile Fix

Wall Tile Fix
  • Material Ready mixed paste
  • Toxicity Non toxic
  • Shelf life 6 months in unopened, undamaged container.  

Alltek tile fix is a ready mixed tile fixing plaster for ease of fixing ceramic tiles over cement plastered leveled surfaces.
Alltek tile fix is supplied in paste form thus avoiding the mess of site mixing.
Alltek tile fix has excellent surface bonding holding the tile and the surface.
alltek tile fix does not require tile wetting and ensure the surface is dry at the time of application.

 
FEATURES  
Features
  • Acrylic readymixed paste.
  • Easy thin coat application.
  • Excellent surface adhesion.
Colour Beige
Packing 25//5/1 kg bag.
Coverage approx. 4-6 sft/kg.
Surface preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Dilution Apply the material as supplied. When required add little water for dilution.
Application
  • Clean the surface.
  • Apply the material on dry surface with alltek spatula, remove excess material & level the surface.
  • Run serrated blade over the surface to make thin tile bed.
  • Fix the tiles.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.