Navyug Udyog

Ambala Cantt, Ambala, Haryana

Double wall construction, inner being made out of highly polished thick stainless steel and outer made out of thick mild steel sheet finished in stoving white enamel paint or staple mat colour combinations. The gap is filled with special glass wool for temp. insulation.The bath is provided with the drain cock to easily drainout the water and clean the chamber when required. A pyramidal shaped cover is provided.Immersion type heating elements are fitted at bottom. Temp. range 5o C above ambient to 80o C with accuracy + 0.5oC to 1oC is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc.The equipment is workable on 220V AC 50Hz single phase. The baths are supplied without racks, thermometer and stirring arrangement.

We are offering hot air oven, nu-101 hot air ovens (memmert type) (three side heating elements) standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations. the gap between the walls is filled with-special grade glass-wool for heat insulation. inner chamber is ribbed for placing shelves at convenient levels. provided with two or three removable shelves. special elegant door closing device has been provided. nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50^oc to 250^oc + 1^oc controlled by capillary type thermostat. l-shaped thermometer is built-in type. control panel is provided with selector switch of high or low rates of power, thermostate control knob and indicators for mains & thermostat. supplied with cord and plug. the equipment is suitable to operate on 220 v ac 50 hz single phase.

 

Chamber Size (in mms inches) No. Of shelves

• 300 x 300 x 300 (12" x 12" x 12" ) 2
• 350 x 350 x 350 (14" x 14" x 14") 2
• 400 x 400 x 400 (16" x 16" x 16") 2
• 450 x 450 x 450 (18" x 18" x 18") 2
• 600 x 450 x 450 (24" x 18" x 18") 2
• 600 x 600 x 600 (24" x 24" x 24") 2
• 900 x 600 x 450 (36" x 24" x 18") 2
• 900 x 600 x 600 (36" x 24" x 24") 2
• 900 x 900 x 900 (36" x 36" x 36") 2

 

Optional 

• Air circulating fan.
• Timer 0-24 hours
• Digital temp. Indicator-cum- controller.
• Imported thermostat “ego” “jumo” german with the accuracy of ±1^oc.
• Digital temp. Indicator.

Designed for low temperature incubation and routine determination of Bio-Chemical Oxygen Demand (B.O.D.). Double wall construction. Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in white stoving enable paint or pastel mat finish colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temp. insulation. The cabinet is mounted on castors. Temperature is controlled by a sensitive thermostat from 5^oC to 50^oC + 1^oC. For lower temp. working a standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp. working. The temp. can be regulated within the range by means of a high precision double action thermo regulator. Inner air circulating system is provided to achieve unit form temperature in the whole chamber. A control panel is provided with various indicators, on off switch, L-shaped thermometer. Supplied with cord and plug etc. equipment is workable on 220 V AC 50 Hz single phase.

Standard double wall fabrication. Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastel colour combinations. The gap is filled with special glass wool for temp. insulation. Double wall door with double window for observation in the chamber. Temperature range 5^oC above ambient to 80^oC + 2^oC controlled by a thermostat. L- shaped thermometer is provided for taking temp. readings. Panel is provided with pilot lamps for mains & heaters, On-off switch, temp. Control knob etc. The equipment is workable on 220 V AC 50 Hz single phase. Heating is achieved from 3 sides. Perforated removable shelves also provided.

Fume exhaust hoods are designed to contain and throw out toxic, obnoxious, pungent smelling gases to protect personnel and equipment in the laboratories. A motor driven dynamically balanced blower with minimum vibration and noise level, creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings. Fabricated out of thick ply-board clad from outside in laminated sheet and inside Finished in non-corrosive, chemical resistant EPOXY paint. An up-down sliding sash made of Teak wood mounted in thick glass sheet is provided. Fluorescent lighting provided in the chamber. A gas tap and a power plug is also provided. Stainless steel wash basin and suitable water tap is also provided. A work bench with cup-board with Drawers are provided to hold the hood at a suitable level from ground.

Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts duly chrome plated. Housing provided with heating mantels for surface temp. upto 300^oC. Provided individual on-off switches & pilot lamps.

Outer wall is made of M.S. sheet duly finished in white stoving enamel/powder paint with mat finished colour combination and inside of stainless steel. The gap between inner and outer wall is filled with high grade mineral glass wool. Temperature range from ambient to 70^oc is controlled by EGOUMO German capillary type thermostat with an accuracy of ± 0.5^oC. The Unit is provided with manual tilting device, so an to tilt the tray holding the eggs to work on 220/230 volts A.C. Supply.

Standard double wall construction, inner being of stainless steel outer of m.s. duly stoving paint finish and gap filled for temp. insulation with glass wool. Top cover with 75 mm (3") holes with concentric rings. Temp. range 5^oC above ambient to 95^oC type element with accuracy of + 1^oC. Supplied complete with plug & cord. Panel provided with pilot lamps, thermostat control knob etc.

Standard double wall construction. Outer chamber made out of mild steel finished in stoving enamel paint. Inner-chamber made of stainless steel sheet. The double door is provided with double glass full view window. Interchangeable platform has been provided. Temp. range 5^oC above ambient to 60^oC +2^oC is controlled by a solid electronic controller. Variable speed control regulator controls the speed upto 200rpm. Supplied complete to work on 220 V AC 50 Hz single phase. Capacity 16x500ml. conical flasks. a) Same as above but temp. range 10^oC to 50^oC with light arrangement.

Double wall construction, inner being made out of highly polished thick stainless steel and outer made out of thick mild steel sheet finished in stoving white enamel paint or staple mat colour combinations. The gap is filled with special glass wool for temp. insulation. The bath is provided with the drain cock to easily drainout the water and clean the chamber when required. A pyramidal shaped cover is provided. Immersion type heating elements are fitted at bottom. Temp. range 5^oC above ambient to 80^oC with accuracy + 0.5^oC to 1^oC is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc. The equipment is workable on 220V AC 50Hz single phase. The baths are supplied without racks, thermometer and stirring arrangement.

Construction as per model NU-110 but with glass windows on both opposite sides, for observation. Temp. controlled by mercury contact thermometer with a sensitivity of 0.2 ^oC. Suitable for precision laboratory activities requiring constant temp. with high degree of accuracy. Complete with stirrer with speed control regulator workable on 220V AC 50 Hz single phase. but provided with cups & sleeves for glass tubes.

Electrically operated, dome type, sturdy, stable heavy body with resiliently mounted motor working on 220V AC 50 Hz single phase for vibration free performance with built in 5-speed regulator and a non- removeable swing out rotor. Complete with tube carriers. Maximum speed 3500 RPM. Neatly finished in stoving enamel paint.

4000 to 5000 r.p.m. fitted with electronic solid state speed regulator. Top cover made of transparent acrylic sheet, cord & plug.

Laminar flow principle involves double filtration of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed.Two way gas tap for gas line has also been provided.

Heavy cast-iron base with sturdy construction with two side arms for holding flask. A heavy-duty fractional motor with variable speed through continuously variable speed controller is provided. The holders can hold flasks of capacity 100 to 1000 ml. Supplied complete with cord & plug etc. to work on 220V AC 50 Hz single phase. Speed 80-280 oscillations per minute.

Body made out of thick stainless steel, top made out of chrome plated sheet concentric rings to cover 3" dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried. Equipment working on 220V AC 50Hz single phase.

Heavy cast-iron base with sturdy construction with two side arms for holding flaks. A heavy-duty fractional motor with variable speed through continuously variable speed controller is provided. The holders can hold flasks of capacity 100 to 1000ml. Supplied complete with cord & plug etc. to work on 220V AC 50 Hz single phase. Speed 80-280 oscillations per minute.

Shaking Machine Wrist Action Heavy cast-iron base with sturdy construction with two side arms for holding flask. A heavy-duty fractional motor with variable speed through continuously variable speed controller is provided. The holders can hold flasks of capacity 100 to 1000 ml. Supplied complete with cord & plug etc. to work on 220V AC 50 Hz single phase. Speed 80-280 oscillations per minute.

Water Bath Rectangular inner being of stainless steel outer of m.s. duly stoving paint finish and gap filled for temp. insulation with glass wool.Top cover with 75 mm (3") holes with concentric rings. Temp. range 5oC above ambient to 95oC type element with accuracy of + 1oC. Supplied complete with plug & cord. Panel provided with pilot lamps, thermostat control knob etc.

Water Bath Rectangular Single Wall (Single wall) Body made out of thick stainless steel, top made out of chrome plated sheet concentric rings to cover 3" dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried. Equipment working on 220V AC 50Hz single phase.

Water Bath Tissue Flotation a quality assured range of Water Bath Tissue Flotation. These machines are used in pharmaceutical and biomedical laboratories for testing tissue samples. these baths using quality grade materials, sourced from the most reliable vendors. We check the Water Bath Tissue Flotation on construction and efficiency parameters before dealing with the clients.

Ultrasonic Water Bath We are a CE and GMP certified company, engaged in manufacturing and supplying a quality range of Ultrasonic Water Bath. These baths are extensively used in pharmaceutical and biomedical applications. To comply with the set industrial norms we use optimum quality materials to manufacture these baths. To provide a defect free range to the clients, we check the Ultrasonic Water Bath on functioning and efficiency parameters. We offer the batch at cost effective prices.

Useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes etc. The housing is 150x150 mm. The speed is regulated by a speed control device. Short eccentric stroke motor imparts vigorous agitation to the tubes or flasks. Body is strong and finished in stoving enamel paint. The equipment is workable on 220V AC 50Hz single phase.