Fuel Valve in Navi Mumbai

• Specialities : A lightweight and high-reliability design • End stroke position indication signals
• Temperature Range (C) : -67ºF to 185ºC
• Dry Weight (lbs) : 2.10 lbs

This type of motor-operated fuel shutoff valve is either a ball-valve style or barrel type and is designed with one or more of the following functions: (1) to cut-off fuel flow into the engine in the event of a fire, (2) to allow fuel cross transfer between left and right wing tanks for in-flight CG control, more...

• Dry Weight : 0.14 lbs
• Temperature Range (F) : -67ºF to 185ºF

Fuel check baffle valves are installed onto the ribs of the aircraft wing. With its low pressure drop, low leakage rate, and lightweight design, this valve is an ideal choice when properly selected for the right application. The fuel check baffle valve has an elegantly simple design, yet is extremely reliable more...

• Proof Pressure : 1010 psig
• FEATURES AND ATTRIBUTES: : Very low pressure drop • Internal components are completely shielded by an aluminum alloy body from the environment • Low Internal leakage
• Dry Weight : 0.35 lbs

A fuel swing check valves is an ideal choice if surge pressures and any hammering effects are an important design consideration. This valve is typically installed horizontally and with the hinge up so that in the unlikely event the torsional spring should break, the valve shall fail close. With its low pressu more...

• Dry Weight : 0.14 lbs
• Internal Leak Rate : 55 cc/min max at 12 psig outlet
• Temperature Range (F) : -67ºF to 185ºF
• Operating Temperature (F) : -58ºF to 131ºF
• Operating Pressure (psig) : 0 to 12 psig

Fuel check baffle valves are installed onto the ribs of the aircraft wing. With its low pressure drop, low leakage rate, and lightweight design, this valve is an ideal choice when properly selected for the right application. The fuel check baffle valve has an elegantly simple design, yet is extremely reliable more...

• Internal Leak Rate : 20 cc/min max at 5 psig outlet 20 cc/min max at 5 psig outlet
• Dry Weight : 0.35 lbs
• Operating Temperature (F) : -58ºF to 131ºF
• Temperature Range (F) : -67ºF to 185ºF

The valve is spring-loaded to the normally closed position to provide motive flow line isolation from downstream equipmentlines when the motive flow supply is non-operational. This elegantly simple design is extremely reliable and several variations of this valve have been produced by Parker for over 30 years more...

• Line Size - Inlet : 1.0 inch
• Operating Pressure (psig) : 60
• Flow Diameter : 0.84 inch
• Fluid Type : Fuel (JP-5, JP-8)

Proven lifesavers, Stratoflex breakaway valves separate under high loads on fluid lines exceeding a predetermined value. Upon separation, the valves automatically seal the fluids in the lines to effectively prevent spills. Breakaway valves are typically used on fuel lines, main fuel tanks, extended range airc more...