Calibrators in Navi Mumbai

• Specialities : Stability DC : < 0.01 %FS / 3 min, AC : < 0.02 %FS / 3 min,Power Supply : 230 VAC, 50 (60) Hz Etc.

Calibration of AC Volt, Amp, Frequency Meters Calibration of DC Volt, Amp Meters Calibration of Resistance Meters, Insulation Testers. more...

• Feature : Power Range : 0 to 100kW,Stability V, I : < 0.01 %FS / 2 min, P : < 0.02 %FS / 2 min Etc.

Calibration of AC Volt, Amp, Watt, Var, Frequency, Powerfactor, Phase angle and Energy Meters Calibration of Voltage, Current, Active & Reactive Power, Frequency, Powerfactor, Phase angle and Energy Transducers. more...

4 - 20mA (1KΩ Load, 24V Loop Supply) with1mA Resolution 0 -100.00mV, 0-1.0000V, 0-12.000V K, J, E & T Thermocouples (°C and °F) Frequency : 1-62500 Hz DC Current Basic Accuracy : 0.025% Easy Key Pad Number Operation Easy Step and Auto Ramp Functions 0-20mA & 0-24mA Selectable 0-100% Output (mA, mV, V) Beep more...

• Noise level : < 50 Db (1 Meter)
• Power Supply : 240 Vac , 50 / 60 Hz @ 4 amp
• Size : 420 x 350 x 250 mm
• Shaft Rotation : Clockwise or Anti-Clockwise
• Resolution : 0.1 RPM (=1000 RPM)
• Weight : 12 Kg
• Motor Type : Ultra Stable Servo Motor
• Display : 4.3" TFT Colour Touch Screen
• Stable Time : < 5 Sec
• Accuracy : ± 0.1 RPM below 1000 RPM, ± 1.0 RPM ABOVE 1000 RPM

more...

Range from -35°C to 650°C Resolution: 0.1°C / 0.01°C Stability: up to 0.03°C Our easy to transport and sturdy calibrators with laboratory accuracy for all areas of application In test bays and development laboratories, temperature sensors have to be tested, adjusted or recalibrated before installation.In more...

INTRODUCTION The SIKA UC mAV is a hand-held process calibrator (conforming toEC standards). It is more particularly  intended for calibration and maintenance. It can measure and generate electrical quantities either on site or in the laboratory. It fulfils voltage and current measuring and generation functio more...

• Weight : 330 gms
• Dimensions : 168 x 88 x 38 mm

9V Eveready Type 216 or Equivalent & External Battery Pack (6 x 1.5 V AA Batteries), 4 and 5 Digits with Annunciator, Operating Environment :- 0 ºC to 50 ºC (32 to 122 ºF), RH < 85%. more...

• Ripple : < 0.1 %
• Power Supply : 230 VAC, 50 (60) Hz
• Stability DC : < 0.01 %FS / 2 min, AC : < 0.03 %FS / 2 min

Calibration of AC Volt, Amp, Frequency Meters, Calibration of DC Volt, Amp Meters, Calibration of Resistance Meters, Insulation Testers, Step adjustment of Output Signal : 10 %FS, 1 %FS, 0.1 %FS, 0.05 %FS more...

• Emissive area uniformity (1) : ±0.20°C @50°C
• Temperature Measurement Accuracy : ±0.3°C
• Temperature range (Standard) : 10°C to 110°C
• Stability : ±0.01°C
• Emissive Area : 200 x 200 mm²
• Power Supply : 230 VAC, 1 ph. 50 Hz
• Display resolution : 0.01°C
• Weight : 25 kg
• Operating temperature range (head) : 5°C to +25°C
• Head dimensions W x H x D (mm³) : 550 x 550 x 260 mm

Extended area black body is defined by the large emitting surface area precise temperature control with good uniformity. Tempsens make Blackbodies are state of the art, highly accurate, and stable with different standard sizes and temperature ranges. The LBBCH Series Extended Area blackbodies are low-temperat more...

• Standard : CE Certified
• Max. Power Consumption : 1 K W
• Temperature Measurement Accuracy : ±0.3°C
• Temperature range (Optional) : 0°C to 110°C
• Remote Operating temperature range (head) : 5°C to +25°C
• Power Supply : 230 VAC, 1 ph. 50 Hz
• Emissive Area : 100 x 100 mm²
• Remote control : Ethernet, RS-232
• Emissive area uniformity (1) : ±0.20°C @50°C
• Method of Control : Digital self tuned PID Controller

Extended area black body is defined by the large emitting surface area precise temperature control with good uniformity. Tempsens make Blackbodies are state of the art, highly accurate, and stable with different standard sizes and temperature ranges. The LBBCH Series Extended Area blackbodies are low-temperat more...

• Emissive area uniformity : ±3 at 400 °C
• Head dimensions W x H x D (mm³) : 550 x 550 x 260 mm,
• Warm-up time : 60 min
• Remote control : Ethernet, RS-232
• Temperature range from : 50 °C to 500 °C
• Stability : ±0.1°C
• Emissive Area : 300 x 300 mm²
• Display resolution : 0.1° C
• Power Supply : 230 VAC, 1 ph. 50 Hz
• Accuracy : ±0.5°C

Extended area Black body is defined by the large emitting surface area precise temperature control with good uniformity. The blackbody is designed to provide infrared radiation as an ideal blackbody emitter. Because of the large uniform surface area the body called extended area black body. We separately prov more...

• MOQ : 1 Piece
• Color : Black
• Brand Name : SANSEL
• Condition : New
• Type : Automatic
• Usage : Industrial
• Country of Origin : India
• Frequency : 50Hz

SANSEL Model BCAL 40, Black body Calibrator is used to measure the accuracy and performance of non-contact fever detection systems, like medical thermometer & image scanner. Now it is being used in relation to COVID-19 (corana virus). This Blackbody Source meets the demand for a simple cost effective solu more...

• MOQ : 1 Piece
• Current Type : AC, DC
• Condition : New
• Color : Blue
• Power : 80 To 264VAC / 113 To 370VDC / 47 To 63Hz
• Brand Name : SANSEL
• Application : Block Temperature Reading

It is one of the smallest dry block with rich features and is highly competitive in price. SANSEL Model TCAL 1404/-5, (Dry Block Miniature Temperature Calibrator) sets a new benchmark in temperature calibration with advanced features that deliver unmatched precision, ease of use, and operational stability. Te more...

• MOQ : 1 Piece
• Brand Name : SANSEL

SANSEL Model TCAL 1402 / 300 Miniature calibrator bath are one of the smallest dry well calibrator in the world, which are ideally suited were necessary for fast calibration in process industries to calibrate Thermocouple, RTD, Indicator with sensor & transmitter with sensor. Temperature range of the TCAL more...

• MOQ : 1 Piece
• Display : LCD, °C or °F user-selectable
• Control Range : 50 to 600 °C @ 25°C
• EnvironEnvironmental operating conditionsmental operating conditions : 0 °C to 50 °C, 0 % to 90 % RH (non-condensing)
• Insert OD : 35mm
• Construction Size (H x W x D) : 320(H) x 145(W) x 290(D) mm
• Power Consumption : 500 Watt
• Insert Length : 145 mm
• Model : SUD-600
• Supply Type : Manufacturer

more...

• MOQ : 1 Piece
• Ambient Temperature : 0-100deg C
• Driven Type : Electric
• Application : Passive Infrared
• Type : Passive Infrared Sensor
• Country of Origin : India
• Voltage : 15-30VDC
• Material : Metal
• Color : Grey, Black
• Supply Type : Manufacturer

Infrared Temperature Calibrator Black Body Source is Design for Infrared Non Contact Temperature Thermomoter it Very Rugged and useful to Calibrate IR Gun and Pyrometers within the Temperature Range (50 To 500 DegC). It is very Light weight , Very Portable , Easy to Carry anywere at site for Site Calibration more...

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Construction Size (H x W x D) : 320(H) x 145(W) x 290(D) mm
• Stabilization Time/settling time : 10 minutes after set point is achieved.
• Instrument Weight : 6 Kg
• Emissive area thermal stability : +0.10°C at -20°C, +0.15°C at 0°C, +0.22°C at 100°C
• Specifications valid in environmental conditions : 5°C ... 25°C
• Display : LCD, °C or °F user-selectable
• Power Supply : 230 V(AC), (50 Hz)
• Power Consumption : 250 Watt

more...