Our Products
Hss Tap
2 Products availableRolling Machine
2 Products availableGrinders, Drills & Power Tools
2 Products availablePVC, HDPE, FRP & Plastic Pipes
1 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableDrilling Bits, Chucks & Collets
1 Products availableElectrical & Electronic Testing Devices
1 Products availableLeading Manufacturer, Supplier & Retailer of .
By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. We are comfortable with traditional payment options as well as the modern ones. Our payment related policies are client friendly. Our payment procedures are transparent, safe, and secure.
Liquid Painting Plant having following items :
Liquid Paint Tanks – 1 Nos.
Dripping Tray - 1 no
Oil Fired Curing oven (Straight Type) – 1 Nos.
Overhead Motorized Conveyor, with support Structure – 1 Set.
Electrical Control Panel – 1 Set.
Painting, and Finishing etc. – 1 Lot.
We ensure that the payment procedures we undertake are completely secured. Credit cards, purchase cards, PINless debit cards, bank account transfers, cash payments, etc., are some of the modes of payment that we accept. We strictly follow the packaging guidelines and we ensure that finest quality packaging material is used as packaging protects the enclosed product from physical, chemical and microbiological invasion.
Details
Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation.
Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode
Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry.
For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank)
Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling.
Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below.
Positioning of the pipe.
Clamping of the pipe.
Slide up with rapid movement till the drill point.
Coolant ON & Slide up with feed movement to drill the pipe on one side.
We Stand in the Midst of Specialized Circular Thread Roller Exporters. We Manufacture High Quality Thread Roller from Superlative Quality Raw Materials that Make Them Durable and Highly Resistant to Various Climatic Factors. We are One of the Predominant Flat Die Thread Roller Suppliers from India. These Thread Rollers are Manufactured as per International Standards, Under the Strict Vigil of Our Skilled Staff. as a Result, this Range of Our Unmatched Quality and High Performance Thread Rollers are Widely Demanded in National as Well as International Markets. in Addition to This, We Provide the Facility to Supply Variety of Thread Rolls as per the Client’s Specifications and Requirements. the 3 Rollers Hu-3r Rolling Machine Operates Hydraulically. the Simultaneously and Concentricity of Three Forces At 120º Assure Stability of the Work Piece During the Rolling and as a Consequence the Maximum Geometrical Precision of the Work Piece. the Elimination of the Support Blade Consents a Better Finishing of the Piece and the Execution of Particularly Delicate Profiles. the Machines is Suitable for Rolling Pipes, Lapping Work, Threading with a High Class Precision and for Mass Production of Scaffolding Pipe Jack and Solid Jacks Screws Etc. the Maximum Values Specified Above Can Not Be Achieved Simultaneously.
Extra Accessories : All Kinds of Thread Roller, Work Rest Blade (Guide), other special equipments are available on request at extra cost.
Specifications
Properties | Description | NCT-3R - 50 | NCT-3R - 50 | NCT- 100H - 120 | NCT- 100H - 120 |
---|---|---|---|---|---|
Work Range | Out side diameter Thread length in feed Thread length through Feed Max. thread pitch |
15-50 mm 50 mm Indefinite 0.8 - 3 mm |
5/8" - 2" 2" Indefinite 32-8 TPI |
25-75 mm 75 mm Indefinite 0.8-6 mm |
1" - 3" 3" Indefinite 32-4 TPI |
Roll Dies | Max. Out side dia Max. In side dia Max. width |
0.8 - 3 mm 140 40 50 |
32-8 TPI | 0.8-6 mm 160 54 80 |
32-4 TPI |
Motor | For roll spindle | 5 H.P. | 5 H.P. | 10 H.P. | 10 H.P. |
3 Phase AC | For hydraulic system | 3 H.P. | 3 H.P. | 5 H.P. | 5 H.P. |
Coolant Pump | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. |
NCT-25 Technical Specifications
Model No. | NCT-25 |
---|---|
Max. Pitch Can be Rolled (in mm) | 2.5 |
Max. Dia can be Rolled in feed (in mm) | 25 |
Max. Dia can be Through feed (in mm) | 16 |
Max. Rolling Length in feed (in mm) | 80 |
Max. Rolling Length Through feed | Indefinite |
Max. Outer Dia Thread Rolls (in mm) | 150 |
Spindle Dia (Bore Dia) (in mm) | 54 |
Max. Rolling Force | 8 Tons |
Power for Roll Spindles | 3 H.P. 1440 RPM |
Power for Hydraulic Pump | 2 H.P. |
Power for coolant pump | 0.1 H.P. |
NCT-40 Technical Specifications
Model No. | NCT-40 |
---|---|
Max. Pitch Can be Rolled (in mm) | 3.5 |
Max. Dia can be Rolled in feed (in mm) | 40 |
Max. Dia can be Through feed (in mm) | 28 |
Max. Rolling Length in feed (in mm) | 150 |
Max. Rolling Length Through feed | Indefinite |
Max. Outer Dia Thread Rolls (in mm) | 180 |
Spindle Dia (Bore Dia) (in mm) | 54 |
Max. Rolling Force | 13 Tons |
Power for Roll Spindles | 5 H.P. 1440 RPM |
Power for Hydraulic Pump | 3 H.P. |
Power for coolant pump | 0.1 H.P. |
NCT-50 Specifications
Model No. | NCT-50 |
---|---|
Max. Pitch Can be Rolled (in mm) | 4.0 |
Max. Dia can be Rolled in feed (in mm) | 50 |
Max. Dia can be Through feed (in mm) | 35 |
Max. Rolling Length in feed (in mm) | 150 |
Max. Rolling Length Through feed | Indefinite |
Max. Outer Dia Thread Rolls (in mm) | 200 |
Spindle Dia (Bore Dia) (in mm) | 69.85 |
Max. Rolling Force | 15 Tons |
Power for Roll Spindles | 7.5 H.P. 1440 RPM |
Power for Hydraulic Pump | 5 H.P. |
Power for coolant pump | 0.1 H.P. |
NCT-80 Specifications
Model No. | NCT-80 |
---|---|
Max. Pitch Can be Rolled (in mm) | 5.0 |
Max. Dia can be Rolled in feed (in mm) | 80 |
Max. Dia can be Through feed (in mm) | 40 |
Max. Rolling Length in feed (in mm) | 150 |
Max. Rolling Length Through feed | Indefinite |
Max. Outer Dia Thread Rolls (in mm) | 220 |
Spindle Dia (Bore Dia) (in mm) | 69.85 |
Max. Rolling Force | 24 Tons |
Power for Roll Spindles | 10 H.P. 1440 RPM |
Power for Hydraulic Pump | 5 H.P. |
Power for coolant pump | 0.1 H.P. |
NCT-100 Specifications
Model No. | NCT-100 |
---|---|
Max. Pitch Can be Rolled (in mm) | 5.5 |
Max. Dia can be Rolled in feed (in mm) | 100 |
Max. Dia can be Through feed (in mm) | 50 |
Max. Rolling Length in feed (in mm) | 150 |
Max. Rolling Length Through feed | Indefinite |
Max. Outer Dia Thread Rolls (in mm) | 220 |
Spindle Dia (Bore Dia) (in mm) | 69.85 |
Max. Rolling Force | 30 Tons |
Power for Roll Spindles | 12.5 H.P. 1440 RPM |
Power for Hydraulic Pump | 5 H.P. |
Power for coolant pump | 0.1 H.P. |
NCT-120 Specifications
Model No. | NCT-120 |
---|---|
Max. Pitch Can be Rolled (in mm) | 8 |
Max. Dia can be Rolled in feed (in mm) | 125 |
Max. Dia can be Through feed (in mm) | 70 |
Max. Rolling Length in feed (in mm) | 150 |
Max. Rolling Length Through feed | Indefinite |
Max. Outer Dia Thread Rolls (in mm) | 220 |
Spindle Dia (Bore Dia) (in mm) | 69.85 |
Max. Rolling Force | 40 Tons |
Power for Roll Spindles | 15 H.P. 1440 RPM |
Power for Hydraulic Pump | 7.5 H.P. |
Power for coolant pump | 0.1 H.P. |
We are a distinguished Manufacturer, Exporter, and Supplier of Pipe End Facing Machine from Punjab (India). Our Pipe End Facing Machine mainly consists of base, head stock, saddle and clamping vice. Before galvanizing and threading, pipes are chamfered from inner, outer and front face, and deburred with the help of Pipe End Facing Machine. Pipe End Facing Machine helps pipes remain stationery while the facing head of the pipe rotates. For manual chamfering, slide of the pipe moves towards facing head.
NCT-E-1.1/2" Technical Specifications
Model No. | NCT-E-1.1/2" |
---|---|
Min. Dia of Pipe to be Chamfered | 1/2” N.B. Pipe |
Max. Dia of Pipe to be Chamfered | 1.1/2” |
Cutting Tools Required (HSS 10% Cobalt) | 3/8” |
Number of Spindle Speeds | Two Nos. |
Range of Spindle Speeds | 37 to 64 RPM |
Main Motor | 3 H.P., 1440 RPM |
Approx. Wt. of the Machine | 750 Kgs. |
NCT-E-4" Technical Specifications
Model No. | NCT-E-4" |
---|---|
Min. Dia of Pipe to be Chamfered | 1/2” N.B. Pipe |
Max. Dia of Pipe to be Chamfered | 4” |
Cutting Tools Required (HSS 10% Cobalt) | 3/8” |
Number of Spindle Speeds | Four Nos. |
Range of Spindle Speeds | 68 to 180 RPM |
Main Motor | 3 H.P., 1440 RPM |
Approx. Wt. of the Machine | 1100 Kgs. |
National Cutting Tools is one of the leading Manufacturers, Exporters and Suppliers of Pipe Beveling Machine. It is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. It consists of the following:- Bed : The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. Head Stock : he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. Clamping Vice : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8, ). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. Beveling Head : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.
NCT-B- 4" To 8" Technical Specifications
Model No. | NCT-B- 4" to 8" |
---|---|
Capacity of the machine for Beveling Min. | 4" N.B. Pipe |
Capacity of the machine for Beveling Max. | 8" N.B. Pipe |
Outer Dia of the Sleeve | 200 mm |
Main Spindle Bearings (Taper Roller) | 32218 & 32219 |
Number of Spindle Speeds | Four Nos. |
Cutting Tools Required (HSS 10% Cobalt)or Carbide Tool | 3/4" (Carbide Tool) |
Main Motor | 15 H.P., 960 RPM |
Max. Travel of the Sleeve | 90 mm |
Approx. Wt. Of the machine. | 2800 Kgs. |
NCT-B- 6" To 16" Technical Specifications
Model No. | NCT-B- 6" to 16" |
---|---|
Capacity of the machine for Beveling Min. | 6" N.B. Pipe |
Capacity of the machine for Beveling Max. | 16" N.B. Pipe |
Outer Dia of the Sleeve | 300 mm |
Main Spindle Bearings (Taper Roller) | 32228 & 32226 |
Number of Spindle Speeds | Four Nos. |
Cutting Tools Required (HSS 10% Cobalt) | 1" (Carbide Tool) |
Main Motor | 30 H.P., 960 RPM |
Max. Travel of the Sleeve | 90 mm |
Approx. Wt. Of the machine. | 8000 Kgs. |
Technical Specifications :
Range of application | 12mm-40mm |
---|---|
Oil pump output | 5L/min |
Rating Power less than | 60Mpa |
Total power of electric (al) motor | 4KW |
Piston motion distance | 100mm |
Out dimension | 1225*570*1100mm |
We are Manufacturer, Exporter and Supplier of genuine quality Rod Threading Machine, which is highly admired by all our clients in the quality cautious market. These machines are highly preferred by the clients as they are easy to use. We are one of the preeminent threading machine manufacturers in India. These machines encompass advanced features that assist us in producing high quality threads at a fast pace. There is a heavy duty geared head box provided for qualitative support to the spindle bearings. Tie rod threading machine manufactured by us offers high resistance to abrasion and heat. The delivery of these threading machines is made well within the stipulated time period. The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF, UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-
The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Threading machines and Die Heads.
NCT-1" Specification
Model NCT-1" | 1/4" to 1" |
---|---|
Saddle Movement | 10" |
Spindle Speed Range | 60-90 |
Number of Spindle Speed | 2 |
Threading Capacity | 1/4" to 1" |
Production per Hour | 60-80 |
H.P. Required | 3 H.P. 960 RPM |
Lead Screw | NIL |
Weight (KG) | 500 |
NCT-1.1/2" Specification
Model NCT-1.1/2" | 3/8"" to 1.1/2" |
---|---|
Saddle Movement | 10"-12" |
Spindle Speed Range | 60-90 |
Number of Spindle Speed | 2 |
Threading Capacity | 3/8" to 1.1/2" |
Production per Hour | 60-80 |
H.P. Required | 3 H.P. 960 RPM |
Lead Screw | NIL |
Weight (KG) | 550 |
NCT-2.1/2" Specification
Model NCT-2.1/2" | 1/2" to 2.1/2" (Bed Type) | 1/2" to 2.1/2" (Pillar Type) |
---|---|---|
Saddle Movement | 14"-16" | 12"-16" |
Spindle Speed Range | 60-90 | 60-90-120 |
Number of Spindle Speed | 2 | 3 |
Threading Capacity | 1/2" to 2.1/2" | 1/2" to 2.1/2" |
Production per Hour | 60-80 | 70-90 |
H.P. Required | 7.5 H.P. 960 RPM | 7.5 H.P. 960 RPM |
Lead Screw | As Per Requirement | As Per Requirement |
Weight (KG) | 990 | 990 |
Our investment in the well-structured warehouse has paid off well. We have successfully installed up-to-the-minute warehouse management software to keep the entire lot in a safe and organized manner. With the due assistance of our deft professionals, we are capable to deliver quality-centralized lot of Manual Multi Spindle Drilling Machine.
We have ultra-modern packaging systems available to keep the products safe from physical factors that may damage the product to some extent. Thus, we only use qualitative packaging material. One can stay assured for high quality of the offered lot as we design and develop it using the best in line raw material and modern work methods. In addition to this, we make sure that the material is sourced from the trusted places only.
Features :
Thread - TPI or Pitch : 1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT
Material : Carbon Steel, HSS
Includes : Wooden Case, Taps, Dies
Type : Tap & Die
Special Taps :
Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.
material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding.
There are essentially four qualities in successfully designing and manufacturing a tap.
theoretical knowledge and practical experience are intrinsic in this process.
size form geometry texture or finish
Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.
The desire to offer the highest level of satisfaction to our clients induced us to manufacture genuine quality Steel Pipe Threading Machine. Steel Pipe Threading Machine manufactured by us is widely used in pipe, bolt, rod, scaffolding pipe, ERW pipes, steel bars, Rebar, PVC pipes, conduit pipes, GI pipes etc. We are one of the bona fide pipe threading machine manufacturers. These machines are manufactured in such a way that they offer high resistance to heat, wear & tear and abrasion. All these qualitative features have assisted us to stand amid the best thread machine suppliers in India. The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF, UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-
The Steel Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition. Design & Workmanship : The National Cutting Tools Steel Pipe Threading Machines are designed to produce quality threads within the to lerance for which they were intended. Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment. The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of NCT Steel Pipe Threading Machines and Die Heads.
Standard Specification Of NCT Steel Pipe Threading Machines
Model Super Deluxe | 3/8" to 1½" | 1/2" to 2½" | 1" to 4" | 2½" to 6" | 4" to 8" |
---|---|---|---|---|---|
Saddle Movement | 10" to 12" | 7" | 10" | 10" | 10" |
Spindle Speed Range | 32 - 54 | 54 - 85 | 28 - 48 | 28 - 48 | 28 - 48 |
Number of Spindle Speed | 2 | 2 | 2 | 2 | 2 |
Threading Capacity | 3/8" - 1.1/2" | 1/2" - 2½" | 1" to 4" | 2½" to 6" | 4" to 8" |
Production per Hour | 60 to 80 | 45 to 80 | 35 to 40 | 35 to 40 | 35 to 40 |
H.P. Required | 3 H.P.960 RPM | 7.5 H.P.960 RPM | 12.5 H.P.960 RPM | 12.5 H.P.960 RPM | 12.5 H.P.960 RPM |
Automatic Leading Cut off | NIL | NIL | Provided | Provided | Provided |
Space Required | 24" x 65" | 42" x 65" | 60" x 96" | 60" x 96" | 60" x 96" |
Weight (KG) | 550 | 990 | 1600 | 1900 | 2300 |