The polypropylene filter Housing are made of ruffed reinforced polypropylene. They are recommended for low flow rates to higher flow rates wide range of applications including residential, commercial and industrial. Available in 8", 10", 20" Standard models and 10", 20" Jumbo models for higher flow rates.

Optional Pressure - relief/bleed button on inlet side of cap. Thick walls for increased strength.

Leak Proof sealing with top - seated Buna- N "O1 ring.

Available with clear SAN - Styrene Acrylonitile / Polycarbonate - PC and opaque (Blue - Black) models

All Housing have been tested and passed the hydro static leak and burst pressure to ensure consistence safe performance

BLUE BLACK / SAN FILTER HOUSING

• Blue Body with Black Cap
• White Body with White Cap
• Clear Body (SAN/PC) with White Cap.
• Available in 8", 10", 20 Sizes
• Pressure relief/ bleed button on inlet Side & Cap
• 1/4", 1/2", '' & 1" in / out connection
• Maximum Flow rates up to
• 8 Ipm - 8"size, 10 Ipm - 10" Size
• 40 Ipm - 20" size
• Maximum temperature 70C and
• Operating Pressure upt to 6 kg/cm2

BIG JUMBO FILTER HOUSING

• Large Capacity housing suitable for high flow applications
• Available in 10" & 20" size to meet your needs - 4.5 DOE Filter Cartridges
• 1 '' in/ out connection
• Maximum Flow Rates 50 Ipm for 10", 100 Ipm for 20"
• Pressure relief / bleed button on inlet / outlet side of cap

Bag filter system is designed for optimum filtration performance. The range provides filtration solution fora broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections. The internal supports ensure bags will not burst as high differential pressures build up during operation. Operation Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.

Features & Benefits

High flow rates, Low pressuredrop, High dirt holding capacity, Positive sealingarrangement to avoid bypassing, Positive sealing arrangement toavoid bypassing, Low down time

Suitable for PP Collar, Rigid Ring &Snap Band Bags, Quick opening Tri Clovers & Fly nut design

Easy to operate & low maintenance, Flow rate up to 2000 m3/hr, Custom design services

Large-area, heavy-duty baskets, Housings are permanently piped, Covers are O-Ring sealed

ASME code stamp available

All housings made from SS 316 L, SS 316 &SS 304 are mirror polished to resist adhesion of dirt and scale

Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of syntheticenamel

Multiple bag filter / Duplex bag filter /Jacketed bag filter unit designs are available

High temperature & High pressuredesign are available

Special option include filter baghold-down devices, sanitary, construction different outletconnections, higher pressure ratings, extra-length legs, heatjacketing and adapters for holding filter bags.

The Polypropylene Filter Housings are made of ruffed reinforced polypropylene. They are recommended for low flow rates to higher flow rates wide range of applications including residential, commercial and industrial. Available in 8", 10", 20" Standard models and 10", 20" Jumbo models for higher flow rates. Optional Pressure - relief/bleed button on inlet side of cap. Thick walls for increased strength. Leak Proof sealing with top - seated Buna- N "O1 ring. Available with clear SAN - Styrene Acrylonitile / Polycarbonate - PC and opaque (Blue - Black) models All Housing have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance Blue Black / San Filter Housing

• Blue Body with Black Cap
• White Body with White Cap
• Clear Body (SAN/PC) with White Cap.
• Available in 8", 10", 20 Sizes
• Pressure relief/ bleed button on inlet Side & Cap 1/4", 1/2", '' & 1" in / out connection
• Maximum Flow rates up to 8 Ipm - 8"size, 10 Ipm - 10" Size, 40 Ipm - 20" size
• Maximum temperature 70^oC and
• Operating Pressure upto to 6 kg/cm2

BIG Jumbo Filter Housing

• Large Capacity housing suitable for high flow applications
• Available in 10" & 20" size to meet your needs - 4.5 DOE Filter Cartridges
• 1 '' in/ out connection
• Maximum Flow Rates 50 Ipm for 10", 100 Ipm for 20"
• Pressure relief / bleed button on inlet / outlet side of cap.

Stainless Steel Filter Housing is designed to offer wide range of fluid flow capacity and compatibility suitable for most type of cartridge filters.

FEATURES AND BENEFITS:

• 304 & 316 Stainless Steel brushed / Electro - polished material construction for maximum corrosion resistance in a Non-Code filter housing.
• Swing bolt closure design with 150 psig (10.3 bar) maximum operating pressure assures secure sealing and easy cartridges change out.

Suitable for right temperature service up to 93 C (200 F)

FLOW RATES FROM 180 GPM TO 300 GPM

Ideal for: Water, Paints, Photographic solutions, food and beverage products, petrochemical, Pharmaceuticals, plating solutions.

All models available with vent and drains for easy cartridges change and maintenance Accept 27 roundsfilter cartridges in length 10", 20", 30", or 40", form variety band Accept cartridges with Double Open End(DOE) Optional for SOE O-ring and 22y O-ring fin end Configuration Standard shell O-ring to be Buna - NOptional : Silicon, viton and EPRM.

Stainless Steel Filter Housing is designed to offer wide range of fluid flow capacity and compatibility suitable for most type of cartridge filters. Features and Benefits

• 304 & 316 Stainless Steel brushed / Electro - polished material construction for maximum corrosion resistance in a Non-Code filter housing.
• Swing bolt closure design with 150 psig (10.3 bar) maximum operating pressure assures secure sealing and easy cartridges change out.
• Suitable for right temperature service up to 93 C (200 F)

Flow rates from 180 GPM to 300 GPM Ideal For

• Water
• Paints
• Photographic solutions
• Food and beverage products
• Petrochemical
• Pharmaceuticals
• Plating solutions

All models available with vent and drains for easy cartridges change and maintenance Accept 27 rounds filter cartridges in length 10", 20", 30", or 40", form variety band Accept cartridges with Double Open End (DOE) Optional for SOE O-ring and 22y O-ring fin end Configuration Standard shell O-ring to be Buna - N Optional : Silicon, viton and EPRM.

Stainless Steel Bag Filter Housings are designed for optimum filtration performance. The range provides filtration solution for a broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections. The internal supports ensure bags will not burst as high differential pressures build up during operation. Operation Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe. Features & Benefits

• High flow rates
• Low pressure drop
• High dirt holding capacity
• Positive sealing arrangement to avoid bypassing
• Suitable for PP Collar, Rigid Ring & Snap Band Bags
• Quick opening Tri Clovers & Fly nut design
• Easy to operate & low maintenance
• Low down time
• Flow rate up to 2000 m3/hr
• Custom design services
• Large-area, heavy-duty baskets
• Housings are permanently piped
• Covers are O-Ring sealed
• ASME code stamp available

All housings made from SS 316 L, SS 316 & SS 304 are mirror polished to resist adhesion of dirt and scale Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel Multiple bag filter / Duplex bag filter / Jacketed bag filter unit designs are available High temperature & High pressure design are availableSpecial option include filter bag hold-down devices, sanitary, construction different outlet connections, higher pressure ratings, extra-length legs, heat jacketing and adapters for holding filter bags. Sizes

• 4" x 10" Long Filter Bag
• 4" x 20" Long Filter Bag
• 7" x 17" Long Filter Bag
• 7" x 32" Long Filter Bag

Multiple bag filter system suitable for

• 2 Nos. Of 7 x 32 Long Filter Bag
• 3 Nos. Of 7 x 32 Long Filter Bag
• 4 Nos. Of 7 x 32 Long Filter Bag
• 5 Nos. Of 7 x 32 Long Filter Bag
• 6 Nos. Of 7 x 32 Long Filter Bag
• 7 Nos. Of 7 x 32 Long Filter Bag
• 8 Nos. Of 7 x 32 Long Filter Bag
• 9 Nos. Of 7 x 32 Long Filter Bag

The polypropylene filter Housing are made of ruffed reinforced polypropylene. They are recommended for low flow rates to higher flow rates wide range of applications including residential, commercial and industrial. Available in 8", 10", 20" Standard models and 10", 20" Jumbo models for higher flow rates.

Optional Pressure - relief/bleed button on inlet side of cap. Thick walls for increased strength.

Leak Proof sealing with top - seated Buna- N "O1 ring.

Available with clear SAN - Styrene Acrylonitile / Polycarbonate - PC and opaque (Blue - Black) models

All Housing have been tested and passed the hydro static leak and burst pressure to ensure consistence safe performance

BLUE BLACK / SAN FILTER HOUSING

• Blue Body with Black Cap
• White Body with White Cap
• Clear Body (SAN/PC) with White Cap.
• Available in 8", 10", 20 Sizes
• Pressure relief/ bleed button on inlet Side & Cap
• 1/4", 1/2", '' & 1" in / out connection
• Maximum Flow rates up to
• 8 Ipm - 8"size, 10 Ipm - 10" Size
• 40 Ipm - 20" size
• Maximum temperature 70C and
• Operating Pressure upt to 6 kg/cm2

BIG JUMBO FILTER HOUSING

• Large Capacity housing suitable for high flow applications
• Available in 10" & 20" size to meet your needs - 4.5 DOE Filter Cartridges
• 1 '' in/ out connection
• Maximum Flow Rates 50 Ipm for 10", 100 Ipm for 20"
• Pressure relief / bleed button on inlet / outlet side of cap

Bag filter system is designed for optimum filtration performance. The range provides filtration solution fora broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections. The internal supports ensure bags will not burst as high differential pressures build up during operation. Operation Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.

Features & Benefits

High flow rates, Low pressuredrop, High dirt holding capacity, Positive sealingarrangement to avoid bypassing, Positive sealing arrangement toavoid bypassing, Low down time

Suitable for PP Collar, Rigid Ring &Snap Band Bags, Quick opening Tri Clovers & Fly nut design

Easy to operate & low maintenance, Flow rate up to 2000 m3/hr, Custom design services

Large-area, heavy-duty baskets, Housings are permanently piped, Covers are O-Ring sealed

ASME code stamp available

All housings made from SS 316 L, SS 316 &SS 304 are mirror polished to resist adhesion of dirt and scale

Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of syntheticenamel

Multiple bag filter / Duplex bag filter /Jacketed bag filter unit designs are available

High temperature & High pressuredesign are available

Special option include filter baghold-down devices, sanitary, construction different outletconnections, higher pressure ratings, extra-length legs, heatjacketing and adapters for holding filter bags.

The Polypropylene Filter Housings are made of ruffed reinforced polypropylene. They are recommended for low flow rates to higher flow rates wide range of applications including residential, commercial and industrial. Available in 8", 10", 20" Standard models and 10", 20" Jumbo models for higher flow rates. Optional Pressure - relief/bleed button on inlet side of cap. Thick walls for increased strength. Leak Proof sealing with top - seated Buna- N "O1 ring. Available with clear SAN - Styrene Acrylonitile / Polycarbonate - PC and opaque (Blue - Black) models All Housing have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance Blue Black / San Filter Housing

• Blue Body with Black Cap
• White Body with White Cap
• Clear Body (SAN/PC) with White Cap.
• Available in 8", 10", 20 Sizes
• Pressure relief/ bleed button on inlet Side & Cap 1/4", 1/2", '' & 1" in / out connection
• Maximum Flow rates up to 8 Ipm - 8"size, 10 Ipm - 10" Size, 40 Ipm - 20" size
• Maximum temperature 70^oC and
• Operating Pressure upto to 6 kg/cm2

BIG Jumbo Filter Housing

• Large Capacity housing suitable for high flow applications
• Available in 10" & 20" size to meet your needs - 4.5 DOE Filter Cartridges
• 1 '' in/ out connection
• Maximum Flow Rates 50 Ipm for 10", 100 Ipm for 20"
• Pressure relief / bleed button on inlet / outlet side of cap.

Stainless Steel Filter Housing is designed to offer wide range of fluid flow capacity and compatibility suitable for most type of cartridge filters.

FEATURES AND BENEFITS:

• 304 & 316 Stainless Steel brushed / Electro - polished material construction for maximum corrosion resistance in a Non-Code filter housing.
• Swing bolt closure design with 150 psig (10.3 bar) maximum operating pressure assures secure sealing and easy cartridges change out.

Suitable for right temperature service up to 93 C (200 F)

FLOW RATES FROM 180 GPM TO 300 GPM

Ideal for: Water, Paints, Photographic solutions, food and beverage products, petrochemical, Pharmaceuticals, plating solutions.

All models available with vent and drains for easy cartridges change and maintenance Accept 27 roundsfilter cartridges in length 10", 20", 30", or 40", form variety band Accept cartridges with Double Open End(DOE) Optional for SOE O-ring and 22y O-ring fin end Configuration Standard shell O-ring to be Buna - NOptional : Silicon, viton and EPRM.

Stainless Steel Filter Housing is designed to offer wide range of fluid flow capacity and compatibility suitable for most type of cartridge filters. Features and Benefits

• 304 & 316 Stainless Steel brushed / Electro - polished material construction for maximum corrosion resistance in a Non-Code filter housing.
• Swing bolt closure design with 150 psig (10.3 bar) maximum operating pressure assures secure sealing and easy cartridges change out.
• Suitable for right temperature service up to 93 C (200 F)

Flow rates from 180 GPM to 300 GPM Ideal For

• Water
• Paints
• Photographic solutions
• Food and beverage products
• Petrochemical
• Pharmaceuticals
• Plating solutions

All models available with vent and drains for easy cartridges change and maintenance Accept 27 rounds filter cartridges in length 10", 20", 30", or 40", form variety band Accept cartridges with Double Open End (DOE) Optional for SOE O-ring and 22y O-ring fin end Configuration Standard shell O-ring to be Buna - N Optional : Silicon, viton and EPRM.

Stainless Steel Bag Filter Housings are designed for optimum filtration performance. The range provides filtration solution for a broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections. The internal supports ensure bags will not burst as high differential pressures build up during operation. Operation Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe. Features & Benefits

• High flow rates
• Low pressure drop
• High dirt holding capacity
• Positive sealing arrangement to avoid bypassing
• Suitable for PP Collar, Rigid Ring & Snap Band Bags
• Quick opening Tri Clovers & Fly nut design
• Easy to operate & low maintenance
• Low down time
• Flow rate up to 2000 m3/hr
• Custom design services
• Large-area, heavy-duty baskets
• Housings are permanently piped
• Covers are O-Ring sealed
• ASME code stamp available

All housings made from SS 316 L, SS 316 & SS 304 are mirror polished to resist adhesion of dirt and scale Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel Multiple bag filter / Duplex bag filter / Jacketed bag filter unit designs are available High temperature & High pressure design are availableSpecial option include filter bag hold-down devices, sanitary, construction different outlet connections, higher pressure ratings, extra-length legs, heat jacketing and adapters for holding filter bags. Sizes

• 4" x 10" Long Filter Bag
• 4" x 20" Long Filter Bag
• 7" x 17" Long Filter Bag
• 7" x 32" Long Filter Bag

Multiple bag filter system suitable for

• 2 Nos. Of 7 x 32 Long Filter Bag
• 3 Nos. Of 7 x 32 Long Filter Bag
• 4 Nos. Of 7 x 32 Long Filter Bag
• 5 Nos. Of 7 x 32 Long Filter Bag
• 6 Nos. Of 7 x 32 Long Filter Bag
• 7 Nos. Of 7 x 32 Long Filter Bag
• 8 Nos. Of 7 x 32 Long Filter Bag
• 9 Nos. Of 7 x 32 Long Filter Bag