We are offering filter cartridges. We are manufacturer and exporters of filter cartridges & its housing

High Flow Pleated Filter Cartriges are made from depth fine PP or GF non-woven fabrics. The filter has a big diameter of 6 inch/l52mm and no inner core, single open. The inside flow pattern ensure that all the particles will be intercepted at the inside of the filter. The long service life and high flow rate result in low investment and less manpower in many applications.

SALIENT FEATURES

[High filtration area, high flow rate]

[High dirt holding capacity, long service life]

With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity and result in long service life.

[Much micron ratings and lengths for choosing]

Micron rating from 0.5m to 1 00m, and lengths from 20" to 60", witch can meet different requirements.

APPLICATIONS

• Sea water desalination
• Food and beverage
• Oil & Chemical
• Machinery & Equipment
• Power plant water treatment
• Steel mill water treatment

Material of Construction[Media]: Pp4 Glass Fiber (GF)[Cage/Coper/End Cap]: PP[Sealing]: Silicone, EPDM, Viton, E-FKM

Performance[Mas. Operating temperature]: 90C[Mas. Operating DP]: 3 bar@21 C

Max. Flow Rate :20" Element upto 175GPM (662 Ltr./min.)40" Element upto 350GPM (1325Ltr./min.)60" Element upto 500GPM (1892 Ltr./min.)

Spun bonded filter cartridges are made of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges available with core & without core version

 

SALIENT FEATURES

• Free of surfactants, Binders and Adhesives
• Excellent flow with low pressure drop
• High dirt holding capacity
• High strength & pressure resistance
• 100 % Polypropylene for wide chemical compatibility
• Nominal & absolute filtration rating
• One piece construction up to 1016 mm & more

 

CONFIGURATION

• Double Open Type (DOE Type)
• Code 7 (226 O Ring Design)

 

CONSTRUCTION

Spun bonded filter cartridge are made of 100% polypropylene.

 

APPLICATIONS

• Food & Beverages
• Pharmaceuticals
• Fine Chemicals
• Magnetic coating
• Petrochemicals
• Cosmetics
• Water Treatment
• Metal Finishing
• Electronics

Stainless Steel Filter Cartridges are designed to overcome the temperature and chemical compatibility limitations of fabric or synthetic fiber media. This will offers very high temperature resistance & can withstand high differential pressure. Stainless steel cartridges are offered in SS 304, SS 316, & SS 316 l material. These elements can be plain cylindrical or pleated configuration to increase filtration area. Normally Stainless Steel Pleated & Cylindrical Filters are supported with coarser filter media to ensure any direct damages to main filtering media under process upsets. A bubble point tests can be done to certify that no opening larger than the specified pore size exist in product joints or seams. No media migration due to Stainless Steel material. These elements can be back washed & reused. Construction Of Sintered MaterialThe composite fiber material is then sintered together with a wire mesh under vacuum conditions and rolled to mats of a specific thickness. Stainless Cartridge can be wrought into tubes, cartridges or disks, plain, pleated or according to customer requests. Type Of Filters

• Stainless steel wire mesh type
• Stainless steel sintered metal type
• Stainless steel random fiber / Sintered metal fiber type Type Of Filter Design
• Plain cylindrical design
• Pleated configuration design

Features & Benefits

• Stable pore shapes
• High permeability
• Low pressure drop
• High dirt-holding capacity (longer lifetime)
• High temperature resistance
• High differential pressure with stand capacity
• Strong corrosion resistant
• Back flushing
• Excellent mechanical strength
• No media migration
• Size customization

Configuration

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design)
• Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design)
• Code 3 S (222 O Ring Design/flat)
• 1" NPT / BSP connection

Applications

• Catalyst Recovery In Petrochemical / Chemical Industries
• Polymer Filtration
• Cross Flow Filtration
• Gas Filtration
• Analytical Devices
• Medical devices
• Oil Filtration
• Hot Gas Filtration
• Aerosol Application
• Fuel & Hydraulic Oil Filtration
• Gas - Liquid Separation
• R.O. Pre Filtration

Stainless steel cartridges are designed to overcome the temperature and chemical compatibility limitations of fabric or synthetic fiber media. This will offers very high temperature resistance & can withstand high differential pressure. Stainless steel cartridges are offered in SS 304, SS 316, & SS 316 l material. These elements can be plain cylindrical or pleated configuration to increase filtration area. Normally all stainless steel pleated & cylindrical filters are supported with coarser filter media to ensure any direct damages to main filtering media under process upsets. A bubble point tests can be done to certify that no opening larger than the specified pore size exist in product joints or seams. No media migration due to stainless steel material. These elements can be back washed & reused.

TYPE OF FILTERS

• Stainless steel wire mesh type
• Stainless steel sintered metal type
• Stainless steel random fiber / Sintered metal fiber type Type Of Filter Design
• Plain cylindrical design
• Pleated configuration design

FEATURES & BENEFITS

• Stable pore shapes
• High permeability
• Low pressure drop
• High dirt-holding capacity (longer lifetime)
• High temperature resistance
• High differential pressure with stand capacity
• Strong corrosion resistant
• Back flushing
• Excellent mechanical strength
• No media migration
• Size customization

CONSTRUCTION OF SINTERED MATERIAL

The composite fiber material is then sintered together with a wire mesh under vacuum conditions and rolled to mats of a specific thickness. Stainless Cartridge can be wrought into tubes, cartridges or disks, plain, pleated or according to customer requests.

CONFIGURATION

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design)
• Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design)
• Code 3 S (222 O Ring Design/flat)
• 1 NPT / BSP Connection

APPLICATIONS

• Catalyst Recovery In Petrochemical / Chemical Industries
• Polymer Filtration
• Cross Flow Filtration
• Gas Filtration
• Analytical Devices
• Medical devices
• Oil Filtration
• Hot Gas Filtration
• Aerosol Application
• Fuel & Hydraulic Oil Filtration
• Gas Liquid Separation
• R.O. Pre Filtration

Wound cartridges are designed to meet the most demanding filtration duties. Operation Unfiltered fluid passes through depth filter matrix, enables the progressive retention of finer particles, providing high efficiency, high dirt retention &filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

 

CONFIGURATION

• Double Open Type (DOE Type)
• Code 7 (226 O Ring Design)

CONSTRUCTION

• Polypropylene with polypropylene core
• Cotton with stainless steel core

APPLICATIONS POLYPROPYLENE WOUND FILTER CARTRIDGE

• Organic Acids
• Oils
• Concentrated Alkalis
• Water
• Organic solvents
• Electroplating solution

COTTON WOUND FILTER CARTRIDGE

• Vegetable Oils
• Dilute Acids
• Organic solvents
• Portable liquids
• Alkalis

SALIENT FEATURES

• Standard and customizes sizes fit most housings
• Filtration rating from 1 to 100 Micron
• High strength & pressure resistance
• Manufactured in continuous length
• Full range of sizes from 10” to 60” Length
• Excellent flow with low pressure drop
• High dirt holding capacity
• Compatible with a wide range of fluids
• NSF & FDA approved

Polypropylene Pleated Filter Cartridge are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries. Polypropylene pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micro ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside, thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs. All components used in the manufacture are biologically safe, chemically inert and meet FDA and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications. Features & Benefits

• All polypropylene construction
• Absolute & nominal efficiency
• 0.1 to 40 Micron ratings
• Gradient density micron fiber media
• High surface area more than 0.5 m2
• Robust outer cage
• Biologically safe
• Wide compatibility
• Non fibber migration
• Thermally welded construction
• FDA approved filters

Configuration

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design) Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design) Code 3 S (222 O Ring Design/flat)

Applications

• Fine Chemicals and Pharmaceuticals
  • D.I. Water
  • R.O.Pre filtration
  • Ophthalmic Liquids
  • Biological Fluids
  • Oral Drugs
• Photographic Film & Paper
  • Anti-Halation Coatings
  • Developer Chemicals
  • Emulsions
  • Gelatins
• Beverages
  • Wine
  • Beer
  • Fruit Juice
  • Alcohols

Spun bonded filter cartridges are made of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges available with core & without core version. The superior structure remains integral even under severe operating conditions and is no media migration. Polypropylene fibers are blown continuous on central molded core, without the need for binders, resins or lubricants. Operation Unfiltered fluid passes through depth filter matrix, enables the progressive retention of finer particles, providing high efficiency, high dirt retention & filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

We are offering filter cartridges. We are manufacturer and exporters of filter cartridges & its housing

High Flow Pleated Filter Cartriges are made from depth fine PP or GF non-woven fabrics. The filter has a big diameter of 6 inch/l52mm and no inner core, single open. The inside flow pattern ensure that all the particles will be intercepted at the inside of the filter. The long service life and high flow rate result in low investment and less manpower in many applications.

SALIENT FEATURES

[High filtration area, high flow rate]

[High dirt holding capacity, long service life]

With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity and result in long service life.

[Much micron ratings and lengths for choosing]

Micron rating from 0.5m to 1 00m, and lengths from 20" to 60", witch can meet different requirements.

APPLICATIONS

• Sea water desalination
• Food and beverage
• Oil & Chemical
• Machinery & Equipment
• Power plant water treatment
• Steel mill water treatment

Material of Construction[Media]: Pp4 Glass Fiber (GF)[Cage/Coper/End Cap]: PP[Sealing]: Silicone, EPDM, Viton, E-FKM

Performance[Mas. Operating temperature]: 90C[Mas. Operating DP]: 3 bar@21 C

Max. Flow Rate :20" Element upto 175GPM (662 Ltr./min.)40" Element upto 350GPM (1325Ltr./min.)60" Element upto 500GPM (1892 Ltr./min.)

Spun bonded filter cartridges are made of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges available with core & without core version

 

SALIENT FEATURES

• Free of surfactants, Binders and Adhesives
• Excellent flow with low pressure drop
• High dirt holding capacity
• High strength & pressure resistance
• 100 % Polypropylene for wide chemical compatibility
• Nominal & absolute filtration rating
• One piece construction up to 1016 mm & more

 

CONFIGURATION

• Double Open Type (DOE Type)
• Code 7 (226 O Ring Design)

 

CONSTRUCTION

Spun bonded filter cartridge are made of 100% polypropylene.

 

APPLICATIONS

• Food & Beverages
• Pharmaceuticals
• Fine Chemicals
• Magnetic coating
• Petrochemicals
• Cosmetics
• Water Treatment
• Metal Finishing
• Electronics

Stainless Steel Filter Cartridges are designed to overcome the temperature and chemical compatibility limitations of fabric or synthetic fiber media. This will offers very high temperature resistance & can withstand high differential pressure. Stainless steel cartridges are offered in SS 304, SS 316, & SS 316 l material. These elements can be plain cylindrical or pleated configuration to increase filtration area. Normally Stainless Steel Pleated & Cylindrical Filters are supported with coarser filter media to ensure any direct damages to main filtering media under process upsets. A bubble point tests can be done to certify that no opening larger than the specified pore size exist in product joints or seams. No media migration due to Stainless Steel material. These elements can be back washed & reused. Construction Of Sintered MaterialThe composite fiber material is then sintered together with a wire mesh under vacuum conditions and rolled to mats of a specific thickness. Stainless Cartridge can be wrought into tubes, cartridges or disks, plain, pleated or according to customer requests. Type Of Filters

• Stainless steel wire mesh type
• Stainless steel sintered metal type
• Stainless steel random fiber / Sintered metal fiber type Type Of Filter Design
• Plain cylindrical design
• Pleated configuration design

Features & Benefits

• Stable pore shapes
• High permeability
• Low pressure drop
• High dirt-holding capacity (longer lifetime)
• High temperature resistance
• High differential pressure with stand capacity
• Strong corrosion resistant
• Back flushing
• Excellent mechanical strength
• No media migration
• Size customization

Configuration

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design)
• Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design)
• Code 3 S (222 O Ring Design/flat)
• 1" NPT / BSP connection

Applications

• Catalyst Recovery In Petrochemical / Chemical Industries
• Polymer Filtration
• Cross Flow Filtration
• Gas Filtration
• Analytical Devices
• Medical devices
• Oil Filtration
• Hot Gas Filtration
• Aerosol Application
• Fuel & Hydraulic Oil Filtration
• Gas - Liquid Separation
• R.O. Pre Filtration

Stainless steel cartridges are designed to overcome the temperature and chemical compatibility limitations of fabric or synthetic fiber media. This will offers very high temperature resistance & can withstand high differential pressure. Stainless steel cartridges are offered in SS 304, SS 316, & SS 316 l material. These elements can be plain cylindrical or pleated configuration to increase filtration area. Normally all stainless steel pleated & cylindrical filters are supported with coarser filter media to ensure any direct damages to main filtering media under process upsets. A bubble point tests can be done to certify that no opening larger than the specified pore size exist in product joints or seams. No media migration due to stainless steel material. These elements can be back washed & reused.

TYPE OF FILTERS

• Stainless steel wire mesh type
• Stainless steel sintered metal type
• Stainless steel random fiber / Sintered metal fiber type Type Of Filter Design
• Plain cylindrical design
• Pleated configuration design

FEATURES & BENEFITS

• Stable pore shapes
• High permeability
• Low pressure drop
• High dirt-holding capacity (longer lifetime)
• High temperature resistance
• High differential pressure with stand capacity
• Strong corrosion resistant
• Back flushing
• Excellent mechanical strength
• No media migration
• Size customization

CONSTRUCTION OF SINTERED MATERIAL

The composite fiber material is then sintered together with a wire mesh under vacuum conditions and rolled to mats of a specific thickness. Stainless Cartridge can be wrought into tubes, cartridges or disks, plain, pleated or according to customer requests.

CONFIGURATION

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design)
• Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design)
• Code 3 S (222 O Ring Design/flat)
• 1 NPT / BSP Connection

APPLICATIONS

• Catalyst Recovery In Petrochemical / Chemical Industries
• Polymer Filtration
• Cross Flow Filtration
• Gas Filtration
• Analytical Devices
• Medical devices
• Oil Filtration
• Hot Gas Filtration
• Aerosol Application
• Fuel & Hydraulic Oil Filtration
• Gas Liquid Separation
• R.O. Pre Filtration

Wound cartridges are designed to meet the most demanding filtration duties. Operation Unfiltered fluid passes through depth filter matrix, enables the progressive retention of finer particles, providing high efficiency, high dirt retention &filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

 

CONFIGURATION

• Double Open Type (DOE Type)
• Code 7 (226 O Ring Design)

CONSTRUCTION

• Polypropylene with polypropylene core
• Cotton with stainless steel core

APPLICATIONS POLYPROPYLENE WOUND FILTER CARTRIDGE

• Organic Acids
• Oils
• Concentrated Alkalis
• Water
• Organic solvents
• Electroplating solution

COTTON WOUND FILTER CARTRIDGE

• Vegetable Oils
• Dilute Acids
• Organic solvents
• Portable liquids
• Alkalis

SALIENT FEATURES

• Standard and customizes sizes fit most housings
• Filtration rating from 1 to 100 Micron
• High strength & pressure resistance
• Manufactured in continuous length
• Full range of sizes from 10” to 60” Length
• Excellent flow with low pressure drop
• High dirt holding capacity
• Compatible with a wide range of fluids
• NSF & FDA approved

Polypropylene Pleated Filter Cartridge are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries. Polypropylene pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micro ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter has created a gradient density matrix, ranging from open on the outside to finer on the inside, thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs. All components used in the manufacture are biologically safe, chemically inert and meet FDA and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications. Features & Benefits

• All polypropylene construction
• Absolute & nominal efficiency
• 0.1 to 40 Micron ratings
• Gradient density micron fiber media
• High surface area more than 0.5 m2
• Robust outer cage
• Biologically safe
• Wide compatibility
• Non fibber migration
• Thermally welded construction
• FDA approved filters

Configuration

• Double Open Type (DOE Type)
• Code 7 F (226 O Ring Design) Code 7 S (226 O Ring Design/flat)
• Code 3 F (222 O Ring Design) Code 3 S (222 O Ring Design/flat)

Applications

• Fine Chemicals and Pharmaceuticals
  • D.I. Water
  • R.O.Pre filtration
  • Ophthalmic Liquids
  • Biological Fluids
  • Oral Drugs
• Photographic Film & Paper
  • Anti-Halation Coatings
  • Developer Chemicals
  • Emulsions
  • Gelatins
• Beverages
  • Wine
  • Beer
  • Fruit Juice
  • Alcohols

Spun bonded filter cartridges are made of 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surface. Filter cartridges available with core & without core version. The superior structure remains integral even under severe operating conditions and is no media migration. Polypropylene fibers are blown continuous on central molded core, without the need for binders, resins or lubricants. Operation Unfiltered fluid passes through depth filter matrix, enables the progressive retention of finer particles, providing high efficiency, high dirt retention & filter life. Fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.