A cylone dust collector is to separte any metallic or other dust particles form th spraying / Blasting room and discharge clean air to the atomosphere. In this suction created by exhaust fan caused the dust laden air to enter the cyclone dust particles get separated by a centrifugal action and get settled in dust tray at the bottom of the cyclone. the dust free clean air escaped to the atmosphere though the exhaust fan. There by allowing dust to the collected dust in a dust tray at thr bottom of the cyclone dust collector is taken out manually, form time to time.

Multiclone dust collector : Multiclone is a primary collection with or without the optional after-filter, to separte dust of moderate to coarse size. the national enterprises multiclone with remove up to 90% (above 40 microns) of dust generated during blasting.

How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan and passes through filter cartridge elements, The abrasive resistant inlet promotes dropping cut high particulate, generates uniform air flow, thus increase filter life. The dust gets deposited on outer surface of cartridges and clean air flows through the center passage of cartridge into clean air plenum. Clean air further exit into atmosphere through outlet duct. Cartridge are periodically and automatically get cleaned through air purging. Sequence circuit activates solenoid valves for high pressure air purging of preselected cartridges. Dust released form cartridges slides downward into the hopper for further collection into the dust bin.

Special Features :

• Downflow Principle : Assures high collection efficiency.
• Modular Design with no moving parts : Low maintanance and replacement of cartidge element Is easy and quick.
• Fair Air to filter ratio : Assures longer life of cartridges
• Variety of fabric material : Cartridges are normally of synthetic webbed material. However, other materials can be supplied to suit Individual application.
• Quality & reliability : Dependable products with in-build quality for trouble free operatioh.

How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan and passes through Pleated Bag elements. The abrasive resistant inlet promotes dropping out high particulate, generates uniform air flow, thus Increase filter life. The dust gets deposited on outer surface of Pleated Bag and clean air flows through the center passage of Pleated Bag into dean air plenum. Clean air further exit into atmosphere through outlet duct. Pleated Bag are periodically and automatically get cleaned through air purging. Sequence circuit activities solenoid valves for high pressure air purging of Preselected Pleated Bag. Dust released from Pleated Bags slides downward into the hopper for further collection into the dust bin.

Special Features :

• Modular design with no moving parts
• Fair air to filter ratio - Assure longer life of Cartridges
• Varirty of fabric material -  Cartridges are normally of synthetic webbed material. however, other materials can be supplied to suit individual appcation.

Typical Apppcation for ventilation & dust collection :

• Shot blasting rooms
• Metal and powder sprying enclosures
• Plasma Spray acoustic chamber
• Wherewer dust extraction is a necessity

How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan an passes through fabric bags. Heavier dust particles fall into hopper due to loss of momentum. Finer dust gets deposited on inner surface of fabric bags and dean air passes across outer surface of filter bags and then exit into atmosphere through outlet. Bags are cleaned through motorised shaking arrangement. When motor is switched OFF, shaking cycle gets activated automatically and bags are shaken for preset time through timer. Dust released from filter bags slides downward into hopper for further collection into dust bin.

Special Features :

• Modular Design with no moving parts : Low maintenance and replacement of fabric bags is easy and quick.
• Fair Air to filter ratio : Assure longer life of bags.
• Variety of fabric material :DUST Fabric bags are normally of cotton wovensatin cloth However, other materials can be supplied to suit individual application.

A cylone dust collector is to separte any metallic or other dust particles form th spraying / Blasting room and discharge clean air to the atomosphere. In this suction created by exhaust fan caused the dust laden air to enter the cyclone dust particles get separated by a centrifugal action and get settled in dust tray at the bottom of the cyclone. the dust free clean air escaped to the atmosphere though the exhaust fan. There by allowing dust to the collected dust in a dust tray at thr bottom of the cyclone dust collector is taken out manually, form time to time.

Multiclone dust collector : Multiclone is a primary collection with or without the optional after-filter, to separte dust of moderate to coarse size. the national enterprises multiclone with remove up to 90% (above 40 microns) of dust generated during blasting.

How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan and passes through filter cartridge elements, The abrasive resistant inlet promotes dropping cut high particulate, generates uniform air flow, thus increase filter life. The dust gets deposited on outer surface of cartridges and clean air flows through the center passage of cartridge into clean air plenum. Clean air further exit into atmosphere through outlet duct. Cartridge are periodically and automatically get cleaned through air purging. Sequence circuit activates solenoid valves for high pressure air purging of preselected cartridges. Dust released form cartridges slides downward into the hopper for further collection into the dust bin.

Special Features :

• Downflow Principle : Assures high collection efficiency.
• Modular Design with no moving parts : Low maintanance and replacement of cartidge element Is easy and quick.
• Fair Air to filter ratio : Assures longer life of cartridges
• Variety of fabric material : Cartridges are normally of synthetic webbed material. However, other materials can be supplied to suit Individual application.
• Quality & reliability : Dependable products with in-build quality for trouble free operatioh.

How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan and passes through Pleated Bag elements. The abrasive resistant inlet promotes dropping out high particulate, generates uniform air flow, thus Increase filter life. The dust gets deposited on outer surface of Pleated Bag and clean air flows through the center passage of Pleated Bag into dean air plenum. Clean air further exit into atmosphere through outlet duct. Pleated Bag are periodically and automatically get cleaned through air purging. Sequence circuit activities solenoid valves for high pressure air purging of Preselected Pleated Bag. Dust released from Pleated Bags slides downward into the hopper for further collection into the dust bin.

Special Features :

• Modular design with no moving parts
• Fair air to filter ratio - Assure longer life of Cartridges
• Varirty of fabric material -  Cartridges are normally of synthetic webbed material. however, other materials can be supplied to suit individual appcation.

Typical Apppcation for ventilation & dust collection :

• Shot blasting rooms
• Metal and powder sprying enclosures
• Plasma Spray acoustic chamber
• Wherewer dust extraction is a necessity

How it Works Dust laden air is drawn into dust collector through inlet due to suction created by exhaust fan an passes through fabric bags. Heavier dust particles fall into hopper due to loss of momentum. Finer dust gets deposited on inner surface of fabric bags and dean air passes across outer surface of filter bags and then exit into atmosphere through outlet. Bags are cleaned through motorised shaking arrangement. When motor is switched OFF, shaking cycle gets activated automatically and bags are shaken for preset time through timer. Dust released from filter bags slides downward into hopper for further collection into dust bin.

Special Features :

• Modular Design with no moving parts : Low maintenance and replacement of fabric bags is easy and quick.
• Fair Air to filter ratio : Assure longer life of bags.
• Variety of fabric material :DUST Fabric bags are normally of cotton wovensatin cloth However, other materials can be supplied to suit individual application.