Our Products
Salient Features :
Applications :
Specification As Per Is 4606 Of 1983 Chemical Composition
Carbon | 0.6-1.25 % |
---|---|
Silicon | 0.2-1.1% |
Manganese | 1.25%Max |
Sulphur | 0.08%Max |
Phosphorus | 0.08%Max |
Shape | Angular |
Density | 7 gm/ml Min. contains hollow shots of 10% max |
Hardness | 400-500 HV |
Micro Structure | Tempered Martensite |
Custom Hardness
Grit | HrC |
---|---|
SS | 40-50 |
SL | 50-60 |
SH | 63+ |
Size Chart
Grades | Sizes In mm |
---|---|
G-12 | 1.70 |
G-14 | 1.40 |
G-16 | 1.20 |
G-18 | 1.00 |
G-25 | 0.60 |
G-40 | 0.40 |
G-50 | 0.30 |
G-80 | 0.180 |
Salient Features :
Applications :
Size Chart
SAE Number | Size in mm |
---|---|
S - 70 | 0.180 |
S - 110 | 0.300 |
S - 170 | 0.425 |
S - 230 | 0.600 |
S - 280 | 0.710 |
S - 330 | 0.850 |
S - 390 | 1.000 |
S - 460 | 1.180 |
S - 550 | 1.400 |
S - 660 | 1.700 |
S - 780 | 2.000 |
Specification As Per Is 4606 Of 1983 Chemical Composition
Carbon | 0.6-1.25% |
---|---|
Silicon | 0.2-1.1% |
Manganese | 1.25%Max |
Sulphur | 0.08%Max |
Phosphorus | 0.08%Max |
Shape | Round |
Density | 7 gm/ml Min. contains hollow shots of 10% max |
Hardness | 400-500 HV |
Micro Structure | Tempered Martensite |
Custom Hardness
Shots | HrC |
---|---|
SS | 40-50 |
SL | 50-60 |
SH | 63 |
Salient Features : Steel cut wire shots are used in an various number of important applications where non-ferrous components like stainless steel, titanium, aluminium, are to be blasted and ferrous contamination is harmful to the component.
Applications :
Size Chart
Cast Shot Size (Equivalent SAE No.) | Cut Wire Designation (Inches) | Cut Wire Designation (MM) |
---|---|---|
S-170 | CW-13 | 0.40 |
S-200 | CW-15 | 0.50 |
S-230 | CW-17 | 0.60 |
S-280 | CW-20 | 0.70 |
S-330 | CW-23 | 0.80 |
S-360 | CW-28 | 1.00 |
S-460 | CW-32 | 1.20 |
Details
Shape | Description | Specification |
---|---|---|
As Cut (-U) | Cylindrical with Sharp Edge | SAE J441/ IS 5873 - 1970 |
Manganese Tile, Plates & Liners :
Available in the following sizes: (inches)
Available in the following sizes (inches) :
Salient Features & Application :
Chemical Composition
Component | Normal Composition (WT %) Range |
(WT %) Range |
---|---|---|
Silicon Dioxide [SiO2] | 25-35% | 80 mg/m3 ; %SiO2 |
Free Silica | <0.5% | 10 mg/m3 [Respirable Dust]; %SiO2+2 |
Cristobalite | ND | 30 mg/m3 [Quartz Total Dust]; %SiO2+2 |
Tridymite | ND | 80 mg/m3 [Respirable Dust]; %SiO2 |
Aluminium | Oxide [Al2O3] | 2-9% |
Calcium Oxide | [CaO] | 2-9% |
Magnesium Oxide | [MgO] | 1-5% |
Iron Oxide | [FeO] | 45-55% |
Potassium Oxide | [K2O] | 1-5% |
Titanium Dioxide | [TiO2] | 0-2% |
Copper Oxide | [CuO] | 0.7% Max |
ND | - | Not Detectable |
Physical Properties
Physical Form | Angular Granules |
---|---|
Specific Gravity | 3.5g/cm3 Typical |
Hardness | 6 Moh |
Bulk Density | 1.75 Tonnes/m3 |
Melting Temperature | > 2500°F |
Chloride | < 7ppm |
Colour | Black |
Evaporation Rate | N/A |
Water Solubility | Negligible |
Odour | None |
Conductivity at 25oC | 2m/S/m |
Moisture Content | <0.1% |
Size (Min – Max) | 1MM TO 1.5MM |