National Cutting Tools

Model Gram, Ludhiana, Punjab

Machine Working Feature

1. Pipe clamps will be provide to hold the  Pipe, bolt, Rod, Rebar, Round Bar, Sag Rod, Anchor Bolt during operation.
2. End Stopper will be provided to adjust the desired  thread length.  Once the stopper is adjusted, the machine will thread all the pieces accurately. Then the lead screw drives the entire pipe fitted in clamp for threading.
3. Threading length will be  set by human machine interface (HMI) with PLC Touch Screen Control Panels which to suit length. .
4. Threading head will open automatically after completion of threading
5. After automatically opening the Box nut,   it will move back the clamping vise for reversing the pipe and will automatically open the vise for manual unload  Pipe, bolt, Rod, Rebar, Round Bar, Sag Rod, Anchor Bolt   

Product DescriptionGEAR HEAD PILLAR TYPE THREAD CUTTING MACHINE1/2'' to 2 .1/2 , 1'' to 4'' , 2 .1/2 to 6'', 4" to 8" CapacityProduct FeatureModel Super Deluxe= 12 mm to 65 mmSaddle Movement= 175 mm Spindle Speed Range=32-54-85Number of Spindle Speed=3Threading Capacity=12 mm to 65 mmProduction per Hour=45 to 80H.P. Required=7.5 H.P.960 RPM Automatic Leading Cut off=NILSpace Required=1060 mm to 1650 mm Model Super Deluxe= 25 mm To 100 mm & 65 mm to 150 mmSaddle Movement=250 mmSpindle Speed Range=28-48Number of Spindle Speed=2Threading Capacity= 25 mm To 100 mm & 65 mm to 150 mmProduction per Hour=35 to 40H.P. Required=12.5 H.P.960 RPMAutomatic Leading Cut off=ProvidedSpace Required= 1525 mm to 2425 mm Model Super Deluxe= 100 mm to 200 mmSaddle Movement=250 mmSpindle Speed Range=28-48Number of Spindle Speed=2Threading Capacity= 100 mm to 200 mmProduction per Hour=35 to 40H.P. Required=15 H.P.960 RPMAutomatic Leading Cut off=ProvidedSpace Required=1775 mm to 2700 mmProduct Specification/ModelsDESIGN & WORKMANSHIP: The National Cutting Tool thread cutting machines are designed to produce quality threads within the to lerance for which they were intended.HEAD STOCK: A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.THE BED: The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.THE SADDLE: The Saddle is fitted on two pillers very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.The APRON: The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. Its all gears are made of best quality steel.VICE JAWS: The vice jaws made from the best quality steel are fitted on the saddle

Wire Striating & Cutting Machine For 5 mm and 13 mm thread bar specification: 1.Thickness of Wire 5mm to 13mm 2.length of wire:25mm to 3000mm 3.Feeding Capacity per minute: 60 feet 4.Power of Motor:15 HP 1440 RPM & 3 HP 1440 RPM 5.Approx Weight: 1200 KG 6.Floor Space Required: 82x22

Wire Striating & Cutting Machine For 5 mm and 13 mm thread bar specification: 1.Thickness of Wire 5mm to 13mm 2.length of wire:25mm to 3000mm 3.Feeding Capacity per minute: 60 feet 4.Power of Motor:15 HP 1440 RPM & 3 HP 1440 RPM 5.Approx Weight: 1200 KG 6.Floor Space Required: 82x22

Metal Cutting Hydraulic Hacksaw Machine It is equipped with feed control device, automatic lifting and lowering arrangement of saw frame with mechanical coolant pump, vice and machine belt guard.Hydraulic Control Hacksaw Machine is supplied complete with suuitable HP AC Electric motor, on-off Starter and V belts. The machine is available in different capacities from 175 mm round bar upto 600 mm round bar cutting capacity. The higher capacity machines are supplied with double cylinder Hydraulic system.

The desire to offer the highest level of satisfaction to our clients induced us to manufacture genuine quality steel pipe threading machine. Steel pipe threading machine manufactured by us is widely used in pipe, bolt, rod, scaffolding pipe, erw pipes, steel bars, rebar, pvc pipes, conduit pipes, gi pipes etc. We are one of the bona fide pipe threading machine manufacturers. These machines are manufactured in such a way that they offer high resistance to heat, wear & tear and abrasion. All these qualitative features have assisted us to stand amid the best thread machine suppliers in india. The pipe threading machine is used for cutting external thread on steel pipe by chasing method. Hss tangential chasers are used as cutters. Pipe remains stationery and die head rotates. Bsp, matrix, bspt, npt, unf, unc, bsw, acme threads can be cut on this machine depending upon the type of chasers. The machine mainly consists the following:-basehead stocksaddlepillar or bed type clamping vicedie head the steel pipe threading machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with company tradition. Design & workmanship : the national cutting tools steel pipe threading machines are designed to produce quality threads within the to lerance for which they were intended. Head stock : a heavy duty geared head box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings. The bed : the bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit. The saddle : the saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the head stock alignment. The apron : the apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel. Vice jaws : the vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle. Range of nct steel pipe threading machines and die heads.38'' to 1.12'' do- capacity pipe & bolt12'' to 2'' do-12'' to 2.12'' do-1'' to 4'' capacity pipe2.12'' to 6'' do-4 to 8 do-