Mumbai, Maharashtra, India
GST : 27AAAPY1296Q1ZU
Verified
Add Review
Our Products
IntroductionSteels with only carbon as their specific alloying element are known as carbon steels. Traces of 0.4% silicon and 1.2% manganese can be found in these steels. Carbon steels also contain small quantities of copper, nickel, molybdenum, aluminium and chromium.
The following datasheet provides an overview of AISI 1015 carbon steel.
ApplicationsAISI 1015 carbon steel can be used in forged, cold-headed or cold-formed parts which are low strength with wear resistant and hard surfaces.
Chemical Composition
The chemical composition of AISI 1015 carbon steel is outlined in the following table.
| Element | Content (%) |
|---|---|
| Iron, Fe | 99.13-99.57 |
| Carbon, C | 0.13-0.18 |
| Manganese, Mn | 0.30-0.60 |
| Sulfur, S | ≤ 0.050 |
| Phosphorous, P | ≤ 0.040 |
Physical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ |
Mechanical Properties
The mechanical properties of the cold drawn AISI 1015 carbon steel are displayed in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 385 MPa | 55800 psi |
| Yield strength | 325 MPa | 47100 psi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80.0 GPa | 11600 ksi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (In 50 mm) | 0.18 | 0.18 |
| Reduction of area | 0.4 | 0.4 |
| Hardness, Brinell | 111 | 111 |
| Hardness, Knoop (converted from Brinell hardness) | 129 | 129 |
| Hardness, Rockwell B (converted from Brinell hardness) | 64 | 64 |
| Hardness, Vickers (converted from Brinell hardness) | 115 | 115 |
| Machinability (based on AISI 1212 steel as 100 machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.) |
60 | 60 |
Thermal Properties
The thermal properties of AISI 1015 carbon steel are given in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@0.000-100°C/32.0-212°F) | 11.9 µm/m°C | 6.61 µin/in°F |
| Thermal conductivity (estimated based on similar materials) | 51.9 W/mK | 360 BTU in/hr.ft².°F |
Other Designations
Equivalent materials to AISI 1015 carbon steel are listed in the following table.
| AMS 5060 | ASTM A29 | ASTM A510 | ASTM A512 (1015, MT 1015) | ASTM A830 |
|---|---|---|---|---|
| ASTM A519 (1015, MT 1015) | ASTM A545 | ASTM A549 (1015) | ASTM A575 (M1015) | ASTM A576 |
| ASTM A635 | ASTM A659 (1015) | ASTM A787 (MT 1015) | ASTM A794 | ASTM A513 (MT 1015) |
| SAE J1397 | SAE J403 | SAE J412 | SAE J414 | ASTM A108 |
| FED QQ-S-698 (C1015) | MIL SPEC MJL-S-16974 |
