Our Products
A Stainless Steel square bar is the solid rod which has the cross-section of a Carbon Steel square and a Square bar is the rod which has the cross section of a circle. In other words, draw a Alloy teel solid square and extrude it up to some particular length. The resultant rod, can be assumed as a Alloy Steel square bar. In the same way, draw a circle and extrude it. The resulting rod can be assumed as a square bar.
Steel Hollow Square Bar is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Mild Steel Square Bar enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Duplex Steel Square Bar is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields
STEEL SQUARE BAR SPECIFICATION
Material | 202, 203, 304, 304h, 304l, 304ln, 316, 316h, 316l, 316ln, 316ti, 309, 310, 317l, 321, 347, 409, 410, 420, 430, 446, 904l, ASTM A276, ASTM A484, F2, F5, F9, F11, F22, F91, LF2, LF3, AISI, ASTM A105 / ASME SA105, ASTM / ASME SA276, ASTM A350 F1 |
||||
Size | from 2.00mm to 6.35mm | ||||
Thickness | 5 mm To 500 mm thick in 100 mm TO 6000 mm | ||||
Form | Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh | ||||
Finish | Bright, Black, Polish | ||||
Condition | Cold Drawn & Polished, Cold Drawn, Centreless Ground & Polished | ||||
Grade | Steel Square Bar | ||||
Steel Square bar size | 4 to 100mm | ||||
Steel Square Bar Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) | ||||
Steel Square Bar Hex Bar size | 2-100mm A/F | ||||
Steel Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm | ||||
Steel Square Bar Rectangles Size | 33 x 30mm to 295 x 1066mm | ||||
Steel Square Bar Flat bar size | Thickness: 2 -100mm | ||||
Width: 10 to 500mm | |||||
Steel Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness | ||||
Steel Square Bar Section | 3.0 to 12.0mm thickness | ||||
Steel Square Bar size | Diameter: 3-~800mm | ||||
Steel Billet Size | 1/2" to 495mm Diameter | ||||
Steel Square Bar Standard Dimensions | Diameter / Height: Steel Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
||||
Steel Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline | ||||
Steel Square Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements | ||||
Steel Square Bar Technique | Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod | ||||
Steel Condition | Hardened & tempered, annealed | ||||
Processing | Bar cutting to 650mm | ||||
Our Steel Round bar conforms to NACE MR0175/ISO 15156 | |||||
CONDITIONS OF STEEL SQUARE BAR | |||||
H&T | Hardened and tempered. | ||||
ANN | Annealed | ||||
PH | Precipitation hardened. | ||||
Surface finish of Steel Square Bar Hex Bar and Rods | |||||
CG | Centreless ground | HF | Hot finished | ||
CF | Cold finished | HRAP | Hot rolled annealed and pickled | ||
CD | Cold drawn | P | Polished | ||
BD | Bright drawn | SRE | Slit rolled edge | ||
P&T | Peeled and turned | RT | Rough turned/peeled | ||
ST | Smooth turned | PR | Peeled and reeled | ||
STEEL SQUARE BAR SIZES | |||||
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance | ||
Cold Drawn and Ground | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 | ||
Peeled and Polished | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 | ||
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 | ||
Cold Drawn and Polish | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 | ||
Steel Bars Standard lengths of 2000 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm). | |||||
5.0 | 45.0 | ||||
6.0 | 50.0 | ||||
7.0 | 55.0 | ||||
8.0 | 60.0 | ||||
9.0 | 65.0 | ||||
10.0 | 70.0 | ||||
12.0 | 75.0 | ||||
16.0 | 80.0 | ||||
20.0 | 90.0 | ||||
25.0 | 100.0 | ||||
30.0 | 130.0 | ||||
35.0 | 160.0 | ||||
40.0 | 200.0 | ||||
SW 13 Steel Square Bar | |||||
SW 17 Steel Square Bar | |||||
SW 19 Steel Square Bar | |||||
SW 24 Steel Square Bar | |||||
SW 27 Steel Square Bar | |||||
Prestige quality Steel Square Bar suppliers offer variety of shapes such as Round Bar, Square Bar, Hexagonal Bar, Flat Bar, Channels & Hollow Bar. | |||||
STEEL SQUARE BAR STOCK | |||||
We offers a widest range of Steel Square Bar and are strategically located to service anywhere in India: | |||||
Stainless Steel Square Bar | PH – Grade Steel Square Bar | ||||
Carbon Steel Square Bar | Nilo Alloys Steel Square Bar | ||||
Alloy Steel Square Bar | Nitronic Alloys Steel Square Bar | ||||
Copper Nickel Steel Square Bar | AISI / SAE Series Square Bar | ||||
Monel Steel Square Bar | EN Series Square Bar | ||||
Inconel Steel Square Ba | Titanium Steel Square Bar | ||||
Duplex Steel Square Bar | Beryllium Steel Square Bar & Rods | ||||
Super Duplex Steel Square Bar | Copper Square bar | ||||
Hastelloy Steel Square Bar | Aluminium Square Bar | ||||
Nickel Alloys Steel Square Bar | Brass & Copper Rods | ||||
Haynes Steel Square Bar | Incoloy Square Bar |
The important thing is that your customer will not accept the rolled bar and wants a Alloy Steel forged bar. Why is really not the issue. Most steel mills will be specific that their product is a "rolled bar". You will probably need to find an open die forging operation to obtain a forged bar. You can google Scot Forge for a start.
Depending on the size of the Steel forged bar , there are some rolled bars produced by continuous casting mills that may have very little rolling/forging reduction, which can have a negative effect on the mechanical properties. Generally, this is controlled by specifying the amount of reduction required, but perhaps your customer has other concerns as well.In general, forging produces more hot work through the thickness of the bar that rolling will. At least, many will believe it does.
ALLOY STEEL FORGED ROUND BAR SPECIFICATION
Forged Square bar size | 4 to 100mm |
Steel Forged Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Alloy Steel Forged Hex Bar size | 2-100mm A/F |
Forged Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Steel Forged Rectangles Size | 33 x 30mm to 295 x 1066mm |
Alloy Steel Forged Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Forged Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Steel Forged Section | 3.0 to 12.0mm thickness |
Alloy Steel Forged Round bar size | Diameter: 3-~800mm |
Forged Billet Size | 1/2" to 495mm Diameter |
Steel Forged Round Bar Standard Dimensions | Diameter / Height: Forged Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches. |
Forged Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Steel Forged Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Alloy Steel Forged Technique | Forged Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Forged Condition | Hardened & tempered, annealed |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Form | Forged Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square Bar, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Processing | Bar cutting to 650mm |
Our Forged Round bar conforms to NACE MR0175/ISO 15156 | |
FORGED BAR GRADES & MATERIALS | |
Stainless Steel Forged Bar : | ss 202, 203, 304, 304h, 304l, 304ln, 316, 316h, 316l, 316ln, 316ti, 309, 310, 317l, 321, 347, 409, 410, 420, 430, 446, 904l, ASTM A276, ASTM A484, F2, F5, F9, F11, F22, F91, LF2, LF3, AISI, ASTM A105 / ASME SA105, ASTM / ASME SA276, ASTM A350 F1 |
Carbon Steel Forged Bar : | ASTM A105 / ASME SA105, ASTM A350 LF2, LTCS |
Alloy Steel Forged Bar : | ASTM A350 F1, F2, F5, F9, F11, F22, F91, LF2, LF3 |
Nickel Alloy Forged Bars | Nickel 200, Nickel 201, Monel 400, Monel K500, Hastelloy C276, Hastelloy C22, Hastelloy B2, Inconel 600, Inconel 625, Inconel 718, Incoloy 800, Incoloy 825, Alloy 20, 904L, Titanium Gr.2, Gr.5, Cu-Ni 90/10 (C70600), Cu-Ni 70/30 (C71500) |
Prestige quality Forged Round Bar suppliers offer variety of shapes such as Round Bar, Square Bar, Hexagonal Bar, Flat Bar, Channels & Hollow Bar. | |
STEEL FORGED ROUND BAR STOCK | |
We offers a widest range of Steel Forged Round Bar and are strategically located to service anywhere in India: | |
Stainless Steel Forged Round Bar | PH – Grade Steel Forged Round Bar |
Carbon Steel Forged Round Bar | Nilo Alloys Steel Forged Round Bar |
SS Forged Bars | Monel Forged Bar and rods |
Alloy Steel Forged Round Bar | Nitronic Alloys Steel Forged Round Bar |
SS Forged Bar | Alloy Steel Forged Bar |
Nickel Alloy Forged Bar | Monel Forged Bar |
Stainless Steel Forged Bars | CS Forged Bars |
Stainless Steel Forged Bar and Rods | Stainless Steel Forged rods |
Copper Nickel Steel Forged Round Bar | AISI / SAE Series Forged Round Bar |
Monel Steel Forged Round Bar | EN Series Forged Round Bar |
Inconel Steel Forged Round Ba | Titanium Steel Forged Round Bar |
Duplex Steel Forged Round Bar | Beryllium Steel Forged Round Bar & Rods |
Super Duplex Steel Forged Round Bar | Copper Forged Round bar |
Hastelloy Steel Forged Round Bar | Aluminium Forged Round Bar |
Nickel Alloys Steel Forged Round Bar | Brass & Copper Rods |
Haynes Steel Forged Round Bar | Incoloy Forged Round Bar |