Product / Services
Post Buy Requirement
NC
National Cutting Tools
Ludhiana, Punjab, India
Add Review
Call Now Call Now

Our Products

  1. 12 Products available

Our Products #4602715

pipe threading machine

Pipe Threading Machine
The Tube Threads Device is used for Reducing Exterior Line on Pipe joints by Pursuing method. HSS Tangential Chasers are used as blades. Tube continues to be invitations and Die Go moves. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme Discussions B.S.F etc. threads can be cut on this machine based on the kind of Chasers.

The device mainly comprises the following:-Base Go Inventory Seat Bed or Principal Kind Clamping Vice Die Go.

BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.

THE PIPE THREADING MACHINESare developed to give highest possible performance and efficient performance under the most serious conditions of support with minimum servicing cost. All the necessary specifications are mixed in this design to from the basic basic principles of correct threading. All the equipment are created of case solidified metal with huge face with and teeth width and cut on hobbing machine for quiet function even at high-speed. Normally the are built with great specifications of craftsmanship, material and great quality so carefully associated withCOMPANY TRADITION.

DESIGN & WORKMANSHIP:The Nationwide Reducing Tools thread cutting machines are developed to generate great quality threads within the to lerance for which they were developed.

HEAD STOCK:A higher great quality designed Go Box is of best great quality launching offering support to the spindle bearings. The box is of equipment type, oiled, fixed with three additional great high quality bearings.

THE BED:The bed is pillar type having two support beams created of best great quality metal perfectly finished & properly difficult firefox coated in the most modern difficult firefox plating unit.

THE SADDLE:The Seat is fixed on two pillers very precisely. It operates on support beams very efficiently and perfectly to the Go Inventory positioning.

The APRON:The attire gives activity to the saddle with head exchange along with support beams through metal holder and pinion preparations. It's all equipment are created of best great quality metal.

VICE JAWS:The vice oral cavity created from the best great quality metal metal are fixed on the saddle well arranged with the top stock center fixed in a great high quality box type vice. The oral cavity are warm handled. The motions of oral cavity are managed by a attach on the saddle.

 Model NCT-1"  1/4" to 1"
 Saddle Movement  10"
 Spindle Speed Range  60-90
 Number of Spindle Speed  2
 Threading Capacity  1/4" to 1"
 Production per Hour  60-80
 H.P. Required  3 H.P. 960 RPM
 Lead Screw  NIL
 Weight (KG)  500
View Complete Details
Ask Latest Price & Details
Bolt Threading Machine

Bolt Threading Machine
The Secure Threads Device is used for Reducing Exterior Line on Screws by Pursuing method.HSSTangential Chasers are used as blades. Secure continues to be invitations and Die Go moves. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme DiscussionsB.S.Fetc. threads can be cut on this machine based on the kind of Chasers.

The device mainly comprises the following:-

BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.

Base Head Stock Saddle Bed or Pillar Type Clamping Vice Die Head.

THE BOLT THREADING MACHINESare developed to give highest possible performance and efficient performance under the most serious conditions of support with minimum servicing cost. All the necessary specifications are mixed in this design to from the basic principles of correct threading. All the equipment are created of case solidified metal with huge face with and teeth width and cut on hobbing machine for quiet function even at high-speed. Normally they are built with great specifications of craftsmanship, material and great quality so carefully associated withCOMPANY TRADITION.

DESIGN & WORKMANSHIP: The Nationwide Cutting Tool thread cutting machines are developed to generate great quality threads within the Lerance for which they were developed.

HEAD STOCK: A higher great quality designed head box is of best great quality launching offering support to the spindle bearings. The box is of equipment type, oiled, fixed with three additional great high quality bearings.

THE BED: The bed is pillar type having two support beams created of best great quality metal perfectly completed & properly difficult chrome coated in the most modern difficult chrome plating unit.

THE SADDLE: The saddle is fixed on two pillers very precisely. It operates on support beams very efficiently and perfectly to the Head Stock alignment.

The APRON: The Apron gives activity to the saddle with head exchange along with support beams through metal holder and pinion preparations. It's all equipment are created of best great quality metal.

VICE JAWS: The vice oral cavity created from the best great quality metal are fixed on the saddle well arranged with the top stock center fixed in a great high quality box type vice. The oral cavity is warm handled. The movements of jaws are controlled by a screw on the saddle.

 Model NCT-1"  1/4" to 1"
 Saddle Movement  10"
 Spindle Speed Range  60-90
 Number of Spindle Speed  2
 Threading Capacity  1/4" to 1"
 Production per Hour  60-80
 H.P. Required  3 H.P. 960 RPM
 Lead Screw  NIL
 Weight (KG)  500
View Complete Details
Ask Latest Price & Details
Pipe Beveling Machine

Pipe Beveling Machine
The Pipe Beveling Machine is used for the objective of beveling the pipe end. Pipe is beveled from the External and Front side is experienced by two different resources. The Pipe continues to be Invitations and the Beveling head moves and comes out of the head stock for reducing the Pipe end.

The Pipe Beveling System mainly includes the following:Bed Head Stock Clamping Vice Beveling Head.
BedHead StockClamping ViceBeveling Head.


BED: -

The Bed of Pipe Beveling Machine is created of cast iron. It is Very Firm and durable in development so as to take highest possible Fill and process max. Oscillations It is offered with four Nos. Base Gaps of Dia M20 at four sides of the bed. It is also offered with Four Utilized holes of 5/8 BSW near the Base Gaps. The head stock and Clamping Vice is fixed on the Bed.


HEAD STOCK: -

The head stock whole body of Pipe Beveling Machine is created of cast iron. It is Very rigid and durable in style. The Go Inventory is developed for Four Nos. Spindle rates of speed. All the Equipment are of helical kind created out of Axle Developing. The dimension gears is 50 mm. The Moving Equipment move on Splined Golf club shafts. The Golf club shafts are installed on Large Responsibility Football Bearings. The Feedback Base will be offered with a lever having three lines for C-Section V-belts.

The Primary Spindle is installed on two Blend Curler Bearings installed in Difficult Firefox Coated Floor Sleeve. The Sleeve along with main spindle fixed with Beveling Go is installed in the Go Inventory whole body and is portable To and Fro along its axis. A Hyd. cylinder tube actuated electronically creates the activity of the sleeve in the Go Inventory. The Movement of the Sleeve can also be created personally. The head stock is Oil Loaded. It is offered with Oil Stuffing gap, Oil Strain gap and Oil Stage Signal.

Model No.  NCT-B- 4" to 8"
 Capacity of the machine for Beveling Min.  4" N.B. Pipe
 Capacity of the machine for Beveling Max.  8" N.B. Pipe
 Outer Dia of the Sleeve  200 mm
 Main Spindle Bearings (Taper Roller)  32218 & 32219
 Number of Spindle Speeds  Four Nos.
 Cutting Tools Required (HSS 10% Cobalt)or Carbide Tool  3/4" (Carbide Tool)
 Main Motor  15 H.P., 960 RPM
 Max. Travel of the Sleeve  90 mm
 Approx. Wt. Of the machine.  2800 Kgs.
View Complete Details
Ask Latest Price & Details
Pipe End Facing Machine

Pipe End Facing Machine
The Machine is used for the purpose of Chamfering and Deburring of the Pipe before Galvanizing and Threading Operation. Pipe is chamfered from the Outer, Inner and Front face by Three different tools. The Pipe remains Stationery and the Facing Head rotates. Slide Travels towards Facing Head for Chamfering manually. The Machine mainly consists of the following: -


BaseHead StockSaddleClamping Vice

 Model No.  NCT-E-1.1/2"
 Min. Dia of Pipe to be Chamfered  1/2” N.B. Pipe
 Max. Dia of Pipe to be Chamfered  1.1/2”
 Cutting Tools Required (HSS 10% Cobalt)  3/8”
 Number of Spindle Speeds  Two Nos.
 Range of Spindle Speeds  37 to 64 RPM
 Main Motor  3 H.P., 1440 RPM
 Approx. Wt. of the Machine  750 Kgs.
View Complete Details
Ask Latest Price & Details
Threading Die

Threading Die
We are reckoned among the bestthreading die headmanufacturers in India. Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in assortment of types with us such as pipe threading die head, bar threading die head, bolt threading die head and rebar threading die head. These threading die heads are efficient enough to give high performance in loner use. We facilitate our clients by providing easy accessibility of these threading die heads at most reasonable prices.

NCT HEAT Treated threading die heads are of revolving type for application to hand operated, semi accurate to hand operated, semi automatic & automatic threading machines of rugged construction the heads provide accurate and trouble free operation over long production runs.

Constructed of specially selected alloys steel, the NCT Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.

Die-Head Size  Holder Set/Sets (Provided)  Chaser Section
 1/4” to 1”  1/4” to 1”  3” x 1.3/64 (Set of 4 Pcs)
 3/8” to 1. 1/2"  3/8” to 1. 1/2"  4” x 1.3/64 (Set of 4 Pcs)
 1/2" to 2.1/2”  1/2" to 1. 1/2" & 1.5/8 to 2.1/2"  4” x 1.1/4” (Set of 4 Pcs)
 1" to 4"  1" to 2"
 2.1/2" to 4"		  4” x 1.1/4” (Set of 4 Pcs)
 5” x 2.1/4” (Set of 4 Pcs)
 2.1/2" to 6"  2.1/2" to 3"
 3.1/2" to 4"
 4.1/2" to 6"		  5” x 2.1/4” (Set of 6 Pcs)
 4" to 8"  4” to 5.1/2”
 5.1/2” to 8”		  5” x 2.1/4” (Set of 6 Pcs)
 






View Complete Details
Ask Latest Price & Details
Bolt Threading Tangential Chaser

Bolt Threading Tangential Chaser
We offer a wide collection ofTangential chasersuch as thread cutting chaser, pipe threading chaser, bolt threading chaser and rod threading chaser. We stand amid the well known steel tangential chasers suppliers in India. We are specialized NCT threading tangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard proven imported high speed steel. These NCT Threading Tangential Chasers are designed as per international threading standard, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1 to 6depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and easily be cut on this tangential chaser.

NCT Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.

NCT Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set.

Die-Head Size  Holder Set/Sets (Provided)  Chaser Section
 1/4” to 1”  1/4” to 1”  3” x 1.3/64 (Set of 4 Pcs)
 3/8” to 1. 1/2"  3/8” to 1. 1/2"  4” x 1.3/64 (Set of 4 Pcs)
 1/2" to 2.1/2”  1/2" to 1. 1/2" & 1.5/8 to 2.1/2"  4” x 1.1/4” (Set of 4 Pcs)
 1" to 4"  1" to 2"
 2.1/2" to 4"		  4” x 1.1/4” (Set of 4 Pcs)
 5” x 2.1/4” (Set of 4 Pcs)
 2.1/2" to 6"  2.1/2" to 3"
 3.1/2" to 4"
 4.1/2" to 6"		  5” x 2.1/4” (Set of 6 Pcs)
 4" to 8"  4” to 5.1/2”
 5.1/2” to 8”		  5” x 2.1/4” (Set of 6 Pcs)





View Complete Details
Ask Latest Price & Details
RE BAR COUPLERS

RE BAR COUPLERS

Re-Bar Couplers are developed to be a aspect of the encouragement cafes. The traditional method of linking encouragement cafes with lap combined parts a continual in strengthened tangible need not be always appropriate. Advantages of convenience and economic system in lap splicing is limited to small size cafes. NCT technical couplers provide the solution for splicing when large size cafes are involved.

Size

Thread

Diameter (mm)

Length (mm)

MM Pitch

Weight(Kg)

12

M16

20

28

2

0.062

16

M20

26

40

2.5

0.082

18

M22

29

44

2.5

0.114

20

M24

32

48

3

0.153

22

M27

36

52

3

0.207

25

M30

40

60

3.5

0.303

28

M33

44

66

3.5

0.398

32

M36

50

72

4

0.608

36

M39

56

80

4

0.875

40

M45

62

90

4

1.138

 
View Complete Details
Ask Latest Price & Details
HSS Tool Bitss

HSS Tool Bitss
Square Tool Bits, M-2 H.S.S Available in two versatile grades of High Speed Steel, M-2 and M-34, bits and blades are ground on all sides and ready for use.

Packaged for convenient handling. Each tool is clearly marked with
size and product number.
Steel Analysis M-2 Tungsten Moly High Speed Steel
Carbon, .84%; Manganese, .25%; Silicon, .30%; Tungsten, 6.40%;
Chromium, 4.15%; Vanadium, 1.90%; Molybdenum, 5.00%.
M-34 Cobalt High Speed Steel
Carbon, .90%; Manganese, .30%; Silicon, .30%; Tungsten, 1.55%;
Chromium, 3.75%; Vanadium, 2.00%; Molybdenum, 8.70%;
Cobalt, 8.00%.

View Complete Details
Ask Latest Price & Details
Thread Rolls

Thread Rolls
We specialize in manufacturing and supplying variety of thread rolls as per customers specifications and requirements. Our assortment of products caters to any and all models of thread rolling machines. All our products are manufactured by us are as per international quality standard.

These thread rolls are used on thread rolling machine. These rolls comes in set of two and three pieces manufactured from D2, D3 and M2 Material to suit any type of machine. For any specification of thread such as ISO Metric Din Whiteworhth America, Trapozodical, Acme etc.
View Complete Details
Ask Latest Price & Details
ctc chasers

Ctc Chasers

manufactured from imported high speed steel.

uniform heat treatment for required hardness as per rockwell c scale.

high tensile strength ensures longer life.

available in size 4=" x 2=" x >", 8 or10 tpi v or u-profile 55.

nct single angle cutters for helical milling of segments/rolls are made with m 15 steel (synonymous to vg steel), a tough grade which gives longer life to the tool even when worked on stainless steel.

nct cutters, size 3" x 5/8" x 1.1/4" are available with 55, 60, 62, 65, 68, 70 lh & rh angles with appropriate tool geometry. They are spacially designed to cut stainless steel with minimum cutting loads. This ensures longer tool life.

nct chasers for chasing grooves in segments/rolls are also made from m 15 steel and manufactured to the exacting standards required by the tea industry. These are available with 6tpi, 8 tpi or 10 tpi in"u" and "v" profiles.

optimum combination of microstructure, grain size and hardness are ensured in heat treatment for durable performance. On specific demand, cutter / chasers are also made from aisi m-2 / m-35 / m-42 and others hss grades of customers choice.

Material Size T P I Profile Inclusive Angle
HSS M-15 (SUP) 2" x ¾" x 4" 8 or 10 U or V 55° or 45°
HSS M-15 (SUP) 2" x ¾" x 4" 8 or 10 U or V 55° or 45°
HSS M2 2.⅛"x ¾"x 4" 8 or 10 U or V 55°
HSS M2 2" x ⅞" x 4" 4 or 6 U or V 55°
HSS M2 1" x ⅜" x 4" 8 or 10 U or V 55°
View Complete Details
Ask Latest Price & Details
HSS Threading Tap

HSS Threading Tap
Thread - TPI or Pitch: 1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT


Material: Carbon Steel, HSS

Includes: Wooden Case, Taps, Dies

Type: Tap & Die


Special Taps:

Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.

Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding

There are essentially four qualities in successfully designing and manufacturing a tap.


Theoretical knowledge and practical experience are intrinsic in this process.

Size form geometry texture or finish.

Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Browse Our Products list of National Cutting Tools Ludhiana, Punjab
Product / Services
Post Buy Requirement
NC
National Cutting Tools
Ludhiana, Punjab, India
Add Review
Call Now Call Now

Our Products

  1. 12 Products available

Our Products #4602715

pipe threading machine

Pipe Threading Machine
The Tube Threads Device is used for Reducing Exterior Line on Pipe joints by Pursuing method. HSS Tangential Chasers are used as blades. Tube continues to be invitations and Die Go moves. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme Discussions B.S.F etc. threads can be cut on this machine based on the kind of Chasers.

The device mainly comprises the following:-Base Go Inventory Seat Bed or Principal Kind Clamping Vice Die Go.

BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.

THE PIPE THREADING MACHINESare developed to give highest possible performance and efficient performance under the most serious conditions of support with minimum servicing cost. All the necessary specifications are mixed in this design to from the basic basic principles of correct threading. All the equipment are created of case solidified metal with huge face with and teeth width and cut on hobbing machine for quiet function even at high-speed. Normally the are built with great specifications of craftsmanship, material and great quality so carefully associated withCOMPANY TRADITION.

DESIGN & WORKMANSHIP:The Nationwide Reducing Tools thread cutting machines are developed to generate great quality threads within the to lerance for which they were developed.

HEAD STOCK:A higher great quality designed Go Box is of best great quality launching offering support to the spindle bearings. The box is of equipment type, oiled, fixed with three additional great high quality bearings.

THE BED:The bed is pillar type having two support beams created of best great quality metal perfectly finished & properly difficult firefox coated in the most modern difficult firefox plating unit.

THE SADDLE:The Seat is fixed on two pillers very precisely. It operates on support beams very efficiently and perfectly to the Go Inventory positioning.

The APRON:The attire gives activity to the saddle with head exchange along with support beams through metal holder and pinion preparations. It's all equipment are created of best great quality metal.

VICE JAWS:The vice oral cavity created from the best great quality metal metal are fixed on the saddle well arranged with the top stock center fixed in a great high quality box type vice. The oral cavity are warm handled. The motions of oral cavity are managed by a attach on the saddle.

 Model NCT-1"  1/4" to 1"
 Saddle Movement  10"
 Spindle Speed Range  60-90
 Number of Spindle Speed  2
 Threading Capacity  1/4" to 1"
 Production per Hour  60-80
 H.P. Required  3 H.P. 960 RPM
 Lead Screw  NIL
 Weight (KG)  500
View Complete Details
Ask Latest Price & Details
Bolt Threading Machine

Bolt Threading Machine
The Secure Threads Device is used for Reducing Exterior Line on Screws by Pursuing method.HSSTangential Chasers are used as blades. Secure continues to be invitations and Die Go moves. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme DiscussionsB.S.Fetc. threads can be cut on this machine based on the kind of Chasers.

The device mainly comprises the following:-

BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.

Base Head Stock Saddle Bed or Pillar Type Clamping Vice Die Head.

THE BOLT THREADING MACHINESare developed to give highest possible performance and efficient performance under the most serious conditions of support with minimum servicing cost. All the necessary specifications are mixed in this design to from the basic principles of correct threading. All the equipment are created of case solidified metal with huge face with and teeth width and cut on hobbing machine for quiet function even at high-speed. Normally they are built with great specifications of craftsmanship, material and great quality so carefully associated withCOMPANY TRADITION.

DESIGN & WORKMANSHIP: The Nationwide Cutting Tool thread cutting machines are developed to generate great quality threads within the Lerance for which they were developed.

HEAD STOCK: A higher great quality designed head box is of best great quality launching offering support to the spindle bearings. The box is of equipment type, oiled, fixed with three additional great high quality bearings.

THE BED: The bed is pillar type having two support beams created of best great quality metal perfectly completed & properly difficult chrome coated in the most modern difficult chrome plating unit.

THE SADDLE: The saddle is fixed on two pillers very precisely. It operates on support beams very efficiently and perfectly to the Head Stock alignment.

The APRON: The Apron gives activity to the saddle with head exchange along with support beams through metal holder and pinion preparations. It's all equipment are created of best great quality metal.

VICE JAWS: The vice oral cavity created from the best great quality metal are fixed on the saddle well arranged with the top stock center fixed in a great high quality box type vice. The oral cavity is warm handled. The movements of jaws are controlled by a screw on the saddle.

 Model NCT-1"  1/4" to 1"
 Saddle Movement  10"
 Spindle Speed Range  60-90
 Number of Spindle Speed  2
 Threading Capacity  1/4" to 1"
 Production per Hour  60-80
 H.P. Required  3 H.P. 960 RPM
 Lead Screw  NIL
 Weight (KG)  500
View Complete Details
Ask Latest Price & Details
Pipe Beveling Machine

Pipe Beveling Machine
The Pipe Beveling Machine is used for the objective of beveling the pipe end. Pipe is beveled from the External and Front side is experienced by two different resources. The Pipe continues to be Invitations and the Beveling head moves and comes out of the head stock for reducing the Pipe end.

The Pipe Beveling System mainly includes the following:Bed Head Stock Clamping Vice Beveling Head.
BedHead StockClamping ViceBeveling Head.


BED: -

The Bed of Pipe Beveling Machine is created of cast iron. It is Very Firm and durable in development so as to take highest possible Fill and process max. Oscillations It is offered with four Nos. Base Gaps of Dia M20 at four sides of the bed. It is also offered with Four Utilized holes of 5/8 BSW near the Base Gaps. The head stock and Clamping Vice is fixed on the Bed.


HEAD STOCK: -

The head stock whole body of Pipe Beveling Machine is created of cast iron. It is Very rigid and durable in style. The Go Inventory is developed for Four Nos. Spindle rates of speed. All the Equipment are of helical kind created out of Axle Developing. The dimension gears is 50 mm. The Moving Equipment move on Splined Golf club shafts. The Golf club shafts are installed on Large Responsibility Football Bearings. The Feedback Base will be offered with a lever having three lines for C-Section V-belts.

The Primary Spindle is installed on two Blend Curler Bearings installed in Difficult Firefox Coated Floor Sleeve. The Sleeve along with main spindle fixed with Beveling Go is installed in the Go Inventory whole body and is portable To and Fro along its axis. A Hyd. cylinder tube actuated electronically creates the activity of the sleeve in the Go Inventory. The Movement of the Sleeve can also be created personally. The head stock is Oil Loaded. It is offered with Oil Stuffing gap, Oil Strain gap and Oil Stage Signal.

Model No.  NCT-B- 4" to 8"
 Capacity of the machine for Beveling Min.  4" N.B. Pipe
 Capacity of the machine for Beveling Max.  8" N.B. Pipe
 Outer Dia of the Sleeve  200 mm
 Main Spindle Bearings (Taper Roller)  32218 & 32219
 Number of Spindle Speeds  Four Nos.
 Cutting Tools Required (HSS 10% Cobalt)or Carbide Tool  3/4" (Carbide Tool)
 Main Motor  15 H.P., 960 RPM
 Max. Travel of the Sleeve  90 mm
 Approx. Wt. Of the machine.  2800 Kgs.
View Complete Details
Ask Latest Price & Details
Pipe End Facing Machine

Pipe End Facing Machine
The Machine is used for the purpose of Chamfering and Deburring of the Pipe before Galvanizing and Threading Operation. Pipe is chamfered from the Outer, Inner and Front face by Three different tools. The Pipe remains Stationery and the Facing Head rotates. Slide Travels towards Facing Head for Chamfering manually. The Machine mainly consists of the following: -


BaseHead StockSaddleClamping Vice

 Model No.  NCT-E-1.1/2"
 Min. Dia of Pipe to be Chamfered  1/2” N.B. Pipe
 Max. Dia of Pipe to be Chamfered  1.1/2”
 Cutting Tools Required (HSS 10% Cobalt)  3/8”
 Number of Spindle Speeds  Two Nos.
 Range of Spindle Speeds  37 to 64 RPM
 Main Motor  3 H.P., 1440 RPM
 Approx. Wt. of the Machine  750 Kgs.
View Complete Details
Ask Latest Price & Details
Threading Die

Threading Die
We are reckoned among the bestthreading die headmanufacturers in India. Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in assortment of types with us such as pipe threading die head, bar threading die head, bolt threading die head and rebar threading die head. These threading die heads are efficient enough to give high performance in loner use. We facilitate our clients by providing easy accessibility of these threading die heads at most reasonable prices.

NCT HEAT Treated threading die heads are of revolving type for application to hand operated, semi accurate to hand operated, semi automatic & automatic threading machines of rugged construction the heads provide accurate and trouble free operation over long production runs.

Constructed of specially selected alloys steel, the NCT Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.

Die-Head Size  Holder Set/Sets (Provided)  Chaser Section
 1/4” to 1”  1/4” to 1”  3” x 1.3/64 (Set of 4 Pcs)
 3/8” to 1. 1/2"  3/8” to 1. 1/2"  4” x 1.3/64 (Set of 4 Pcs)
 1/2" to 2.1/2”  1/2" to 1. 1/2" & 1.5/8 to 2.1/2"  4” x 1.1/4” (Set of 4 Pcs)
 1" to 4"  1" to 2"
 2.1/2" to 4"		  4” x 1.1/4” (Set of 4 Pcs)
 5” x 2.1/4” (Set of 4 Pcs)
 2.1/2" to 6"  2.1/2" to 3"
 3.1/2" to 4"
 4.1/2" to 6"		  5” x 2.1/4” (Set of 6 Pcs)
 4" to 8"  4” to 5.1/2”
 5.1/2” to 8”		  5” x 2.1/4” (Set of 6 Pcs)
 






View Complete Details
Ask Latest Price & Details
Bolt Threading Tangential Chaser

Bolt Threading Tangential Chaser
We offer a wide collection ofTangential chasersuch as thread cutting chaser, pipe threading chaser, bolt threading chaser and rod threading chaser. We stand amid the well known steel tangential chasers suppliers in India. We are specialized NCT threading tangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard proven imported high speed steel. These NCT Threading Tangential Chasers are designed as per international threading standard, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1 to 6depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and easily be cut on this tangential chaser.

NCT Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended.

NCT Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set.

Die-Head Size  Holder Set/Sets (Provided)  Chaser Section
 1/4” to 1”  1/4” to 1”  3” x 1.3/64 (Set of 4 Pcs)
 3/8” to 1. 1/2"  3/8” to 1. 1/2"  4” x 1.3/64 (Set of 4 Pcs)
 1/2" to 2.1/2”  1/2" to 1. 1/2" & 1.5/8 to 2.1/2"  4” x 1.1/4” (Set of 4 Pcs)
 1" to 4"  1" to 2"
 2.1/2" to 4"		  4” x 1.1/4” (Set of 4 Pcs)
 5” x 2.1/4” (Set of 4 Pcs)
 2.1/2" to 6"  2.1/2" to 3"
 3.1/2" to 4"
 4.1/2" to 6"		  5” x 2.1/4” (Set of 6 Pcs)
 4" to 8"  4” to 5.1/2”
 5.1/2” to 8”		  5” x 2.1/4” (Set of 6 Pcs)





View Complete Details
Ask Latest Price & Details
RE BAR COUPLERS

RE BAR COUPLERS

Re-Bar Couplers are developed to be a aspect of the encouragement cafes. The traditional method of linking encouragement cafes with lap combined parts a continual in strengthened tangible need not be always appropriate. Advantages of convenience and economic system in lap splicing is limited to small size cafes. NCT technical couplers provide the solution for splicing when large size cafes are involved.

Size

Thread

Diameter (mm)

Length (mm)

MM Pitch

Weight(Kg)

12

M16

20

28

2

0.062

16

M20

26

40

2.5

0.082

18

M22

29

44

2.5

0.114

20

M24

32

48

3

0.153

22

M27

36

52

3

0.207

25

M30

40

60

3.5

0.303

28

M33

44

66

3.5

0.398

32

M36

50

72

4

0.608

36

M39

56

80

4

0.875

40

M45

62

90

4

1.138

 
View Complete Details
Ask Latest Price & Details
HSS Tool Bitss

HSS Tool Bitss
Square Tool Bits, M-2 H.S.S Available in two versatile grades of High Speed Steel, M-2 and M-34, bits and blades are ground on all sides and ready for use.

Packaged for convenient handling. Each tool is clearly marked with
size and product number.
Steel Analysis M-2 Tungsten Moly High Speed Steel
Carbon, .84%; Manganese, .25%; Silicon, .30%; Tungsten, 6.40%;
Chromium, 4.15%; Vanadium, 1.90%; Molybdenum, 5.00%.
M-34 Cobalt High Speed Steel
Carbon, .90%; Manganese, .30%; Silicon, .30%; Tungsten, 1.55%;
Chromium, 3.75%; Vanadium, 2.00%; Molybdenum, 8.70%;
Cobalt, 8.00%.

View Complete Details
Ask Latest Price & Details
Thread Rolls

Thread Rolls
We specialize in manufacturing and supplying variety of thread rolls as per customers specifications and requirements. Our assortment of products caters to any and all models of thread rolling machines. All our products are manufactured by us are as per international quality standard.

These thread rolls are used on thread rolling machine. These rolls comes in set of two and three pieces manufactured from D2, D3 and M2 Material to suit any type of machine. For any specification of thread such as ISO Metric Din Whiteworhth America, Trapozodical, Acme etc.
View Complete Details
Ask Latest Price & Details
ctc chasers

Ctc Chasers

manufactured from imported high speed steel.

uniform heat treatment for required hardness as per rockwell c scale.

high tensile strength ensures longer life.

available in size 4=" x 2=" x >", 8 or10 tpi v or u-profile 55.

nct single angle cutters for helical milling of segments/rolls are made with m 15 steel (synonymous to vg steel), a tough grade which gives longer life to the tool even when worked on stainless steel.

nct cutters, size 3" x 5/8" x 1.1/4" are available with 55, 60, 62, 65, 68, 70 lh & rh angles with appropriate tool geometry. They are spacially designed to cut stainless steel with minimum cutting loads. This ensures longer tool life.

nct chasers for chasing grooves in segments/rolls are also made from m 15 steel and manufactured to the exacting standards required by the tea industry. These are available with 6tpi, 8 tpi or 10 tpi in"u" and "v" profiles.

optimum combination of microstructure, grain size and hardness are ensured in heat treatment for durable performance. On specific demand, cutter / chasers are also made from aisi m-2 / m-35 / m-42 and others hss grades of customers choice.

Material Size T P I Profile Inclusive Angle
HSS M-15 (SUP) 2" x ¾" x 4" 8 or 10 U or V 55° or 45°
HSS M-15 (SUP) 2" x ¾" x 4" 8 or 10 U or V 55° or 45°
HSS M2 2.⅛"x ¾"x 4" 8 or 10 U or V 55°
HSS M2 2" x ⅞" x 4" 4 or 6 U or V 55°
HSS M2 1" x ⅜" x 4" 8 or 10 U or V 55°
View Complete Details
Ask Latest Price & Details
HSS Threading Tap

HSS Threading Tap
Thread - TPI or Pitch: 1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT


Material: Carbon Steel, HSS

Includes: Wooden Case, Taps, Dies

Type: Tap & Die


Special Taps:

Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.

Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding

There are essentially four qualities in successfully designing and manufacturing a tap.


Theoretical knowledge and practical experience are intrinsic in this process.

Size form geometry texture or finish.

Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.