Product / Services
Post Buy Requirement
NC

National Cutting Tools
Model Gram, Ludhiana, Punjab

Add Review
Call Now Call Now

Our Products

  1. Roll Forming & Bending Machines

    2 Products available

  2. Faucet

    1 Products available

  3. Electric Cutting Tools

    1 Products available

  4. Machine And Precision Tools

    1 Products available

  5. Milling Cutter & Cutting Tools

    1 Products available

  6. Surface Finishing Machines

    1 Products available

  7. Metal Cutting Machine

    1 Products available

Our Products

pipe threading machine

Pipe Threading Machine
  • Model NCT-1"  1/4" to 1"
  •  Saddle Movement  10"
  •  Spindle Speed Range  60-90
  •  Number of Spindle Speed  2
  •  Threading Capacity  1/4" to 1"
  •  Production per Hour  60-80
  •  H.P. Required  3 H.P. 960 RPM
  •  Lead Screw  NIL
  •  Weight (KG)  500
The Tube Threads Device is used for Reducing Exterior Line on Pipe joints by Pursuing method. HSS Tangential Chasers are used as blades. Tube continues to be invitations and Die Go moves. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme Discussions B.S.F etc. threads can be cut on this machine based on the kind of Chasers.

The device mainly comprises the following:-Base Go Inventory Seat Bed or Principal Kind Clamping Vice Die Go.

BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.

THE PIPE THREADING MACHINESare developed to give highest possible performance and efficient performance under the most serious conditions of support with minimum servicing cost. All the necessary specifications are mixed in this design to from the basic basic principles of correct threading. All the equipment are created of case solidified metal with huge face with and teeth width and cut on hobbing machine for quiet function even at high-speed. Normally the are built with great specifications of craftsmanship, material and great quality so carefully associated withCOMPANY TRADITION.

DESIGN & WORKMANSHIP:The Nationwide Reducing Tools thread cutting machines are developed to generate great quality threads within the to lerance for which they were developed.

HEAD STOCK:A higher great quality designed Go Box is of best great quality launching offering support to the spindle bearings. The box is of equipment type, oiled, fixed with three additional great high quality bearings.

THE BED:The bed is pillar type having two support beams created of best great quality metal perfectly finished & properly difficult firefox coated in the most modern difficult firefox plating unit.

THE SADDLE:The Seat is fixed on two pillers very precisely. It operates on support beams very efficiently and perfectly to the Go Inventory positioning.

The APRON:The attire gives activity to the saddle with head exchange along with support beams through metal holder and pinion preparations. It's all equipment are created of best great quality metal.

VICE JAWS:The vice oral cavity created from the best great quality metal metal are fixed on the saddle well arranged with the top stock center fixed in a great high quality box type vice. The oral cavity are warm handled. The motions of oral cavity are managed by a attach on the saddle.
View Complete Details
Ask Latest Price & Details
H.S.S Threading Tap

H.S.S Threading Tap
Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.

Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding

There are essentially four qualities in successfully designing and manufacturing a tap.


Theoretical knowledge and practical experience are intrinsic in this process.

Size form geometry texture or finish.

Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.
View Complete Details
Ask Latest Price & Details
CTC Chasers and Cutters

CTC Chasers And Cutters

Available in size 4=" x 2=" x >", 8 or10 TPI V or U-profile 55.

NCT SINGLE ANGLE CUTTERS for helical milling of segments/rolls are made with M 15 steel (synonymous to VG Steel), a tough grade which gives longer life to the tool even when worked on stainless steel.

NCT cutters, size 3" X 5/8" X 1.1/4" are available with 55, 60, 62, 65, 68, 70 LH & RH angles with appropriate tool geometry. They are spacially designed to cut stainless steel with minimum cutting loads. This ensures longer tool life.

NCT CHASERS for chasing grooves in segments/rolls are also made from M 15 steel and manufactured to the exacting standards required by the Tea Industry. These are available with 6TPI, 8 TPI or 10 TPI in"U" and "V" profiles.

Optimum combination of microstructure, grain size and hardness are ensured in heat treatment for durable performance. On specific demand, cutter / chasers are also made from AISI M-2 / M-35 / M-42 and others HSS grades of customers choice.
View Complete Details
Ask Latest Price & Details
Circular Thread Rolls

Circular Thread Rolls
We specialize in manufacturing and supplying variety of thread rolls as per customers specifications and requirements. Our assortment of products caters to any and all models of thread rolling machines. All our products are manufactured by us are as per international quality standard.

These thread rolls are used on thread rolling machine. These rolls comes in set of two and three pieces manufactured from D2, D3 and M2 Material to suit any type of machine. For any specification of thread such as ISO Metric Din Whiteworhth America, Trapozodical, Acme etc.
View Complete Details
Ask Latest Price & Details
End Mills

End Mills
End millsare the primary cutting tools used in a vertical mill such as the mini-mills we are concerned with. Like drills, they come in a wide variety of styles and quality levels. The most common ones you will need for getting started are 2-flute and 4-flute end mils. You can buy them individually as needed, or in sets.

View Complete Details
Ask Latest Price & Details
Hydraulic Pipe Threading Machine

Hydraulic Pipe Threading Machine
  •  Model NCT-2.1/2"  1/2" to 2.1/2" (Pillar Type)
  •  Saddle Movement  12"-16"
  •  Spindle Speed Range  60-90-120
  •  Number of Spindle Speed  3
  •  Threading Capacity  1/2" to 2.1/2"
  •  Production per Hour  70-90
  •  H.P. Required  7.5 H.P. 960 RPM
  •  Lead Screw  As Per Requirement
  •  Weight (KG)  990
Principal Kind Gas Discussions Device comes with self starting the die go with go inventory equipment solidified with power package, with one hydraulic cylinder tube for lead attach box nut interesting, one hydraulic pipe clamping cylinder tube and one hydraulic cylinder tube for die-head starting with small changes with automated with control panel.

The Pipe Threading Machine is used for Reducing Exterior Line on Pipe joints by Pursuing method. HSS Tangential Chasers are used as blades. Pipe continues to be invitations and Die Head moves. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme DiscussionsB.S.Fetc. threads can be cut on this machine based on the kind of Chasers.

The device mainly comprises the following:-

BaseHead StockSaddleBed or Pillar Type Clamping ViceDie Head.

THE PIPE THREADING MACHINESare developed to give highest possible performance and efficient performance under the most serious conditions of support with lowest servicing cost. All the necessary specifications are mixed in this design to from the basic principles of correct threading. All the equipment are created of case solidified metal with huge face with and teeth width and cut on hobbing machine for quiet function even at high-speed. Normally they are built with great specifications of craftsmanship, material and great quality so carefully associated withCOMPANY TRADITION.

DESIGN & WORKMANSHIP: The National Cutting Tools thread cutting machines are developed to generate great quality threads within the Lerance for which they were developed.

HEAD STOCK: A higher great quality designed Head Box is of best great quality launching offering support to the spindle bearings. The box is of equipment type, oiled, fixed with three additional great high quality bearings.

THE BED:The bed is pillar type having two support beams created of best great quality metal perfectly completed & properly difficult chrome coated in the most modern difficult chrome plating unit.

THE SADDLE:The Seat is fixed on two pillers very precisely. It operates on support beams very efficiently and perfectly to the Head Stock positioning.

The APRON: The attire gives activity to the saddle with go exchange along with support beams through metal holder and pinion preparations. It's all equipment are created of best great quality metal.

VICE JAWS:The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws
View Complete Details
Ask Latest Price & Details
Pipe Beveling Machine

Pipe Beveling Machine
  •  Model No.  NCT-B- 4" to 8"
  •  Capacity of the machine for Beveling Min.  4" N.B. Pipe
  •  Capacity of the machine for Beveling Max.  8" N.B. Pipe
  •  Outer Dia of the Sleeve  200 mm
  •  Main Spindle Bearings (Taper Roller)  32218 & 32219
  •  Number of Spindle Speeds  Four Nos.
  •  Cutting Tools Required (HSS 10% Cobalt)or Carbide Tool  3/4" (Carbide Tool)
  •  Main Motor  15 H.P., 960 RPM
  •  Max. Travel of the Sleeve  90 mm
  •  Approx. Wt. Of the machine.  2800 Kgs.

GENERAL: -

The Pipe Beveling Machine is used for the objective of beveling the pipe end. Pipe is beveled from the External and Front side is experienced by two different resources. The Pipe continues to be Invitations and the Beveling head moves and comes out of the head stock for reducing the Pipe end.

The Pipe Beveling System mainly includes the following:Bed Head Stock Clamping Vice Beveling Head.
BedHead StockClamping ViceBeveling Head.


BED: -

The Bed of Pipe Beveling Machine is created of cast iron. It is Very Firm and durable in development so as to take highest possible Fill and process max. Oscillations It is offered with four Nos. Base Gaps of Dia M20 at four sides of the bed. It is also offered with Four Utilized holes of 5/8 BSW near the Base Gaps. The head stock and Clamping Vice is fixed on the Bed.


HEAD STOCK: -

The head stock whole body of Pipe Beveling Machine is created of cast iron. It is Very rigid and durable in style. The Go Inventory is developed for Four Nos. Spindle rates of speed. All the Equipment are of helical kind created out of Axle Developing. The dimension gears is 50 mm. The Moving Equipment move on Splined Golf club shafts. The Golf club shafts are installed on Large Responsibility Football Bearings. The Feedback Base will be offered with a lever having three lines for C-Section V-belts.

The Primary Spindle is installed on two Blend Curler Bearings installed in Difficult Firefox Coated Floor Sleeve. The Sleeve along with main spindle fixed with Beveling Go is installed in the Go Inventory whole body and is portable To and Fro along its axis. A Hyd. cylinder tube actuated electronically creates the activity of the sleeve in the Go Inventory. The Movement of the Sleeve can also be created personally. The head stock is Oil Loaded. It is offered with Oil Stuffing gap, Oil Strain gap and Oil Stage Signal.


CLAMPING VICE: -

The Box Type Clamping Vice is fixed on the Bed. The Vice is offered with Circular Clamping Oral cavity for each dimension (4, 5, 6, 7, 8, ). The Vice will be Self-centering kind. The activity of the Clamping Oral cavity is created by Air-driven cylinder fixed on the Vice actuated electronically. The Vice will be very rigid and durable in style. System will be provided with individual clamping vice.


BEVELLING HEAD: -

A unique Beveling Go will be offered with the product. Two Tools of HSS will be used, One for Beveling and second for Main Experience. The Beveling System will be installed in a unique Springtime Packed System Owner with a Curler device. It is fixed on the primary spindle that is then installed in the journeying Sleeve.

Note:-One set of Round Type Clamping Jaws will be provided with the machine. Other Round Type Clamping Jaws are Optional and will be supplied at an extra Cos
View Complete Details
Ask Latest Price & Details
Metal Cutting Hydraulic Hacksaw Machine

Metal Cutting Hydraulic Hacksaw Machine
  • Model No.  NCT-H-175
  •  Capacity - round bar up to (mm)  175
  •  Capacity - square bar up to (mm)  150
  •  Stroke (mm):  140
  •  Strokes per minute  100 & 120
  •  Motor (HP)  1.0
  •  Blade Size (mm)  356 or 406
  •  Net / Gross Weight (kgs.)  300 / 400
  •  Dimensions (m)  1.1 x 0.8 x 1.0
  •  Shipping Volume (m3)  0.88
General Specification:

This is a motorised model Hydraulic control Hacksaw Machine. It is equipped with feed control device, automatic lifting and lowering arrangement of saw frame with mechanical coolant pump, vice and machine belt guard.

Hydraulic Control Hacksaw Machine is supplied complete with suuitable HP AC Electric motor, on-off Starter and V belts. The machine is available in different capacities from 175 mm round bar upto 600 mm round bar cutting capacity. The higher capacity machines are supplied with double cylinder Hydraulic system.


V belt drive with two speeds by step pulley
- Hydraulic relief to saw blade on non-cutting stroke
- Automatic lifting of saw blade after cutting action

Standard Accessories:Electric Motor, Starter, Mechanical Coolant Pump, Length Gauge, Fixed Vice
Optional Accessories: Angular Vice in lieu of Fixed Vice, Bar Support Stand
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.