Material :

• SS304/GI/MS. Design Concept Self-contained, pre-wired, fully equipped air shower/ tunnel systems help solve decontamination problems.
• HEPA filter/fan modules (rated 99.997% efficient @ 0.3 micron particles) wash personnel with Class 100 air to dislodge and remove particles.
• A control panel provides programmable control over access door operation · Interlocking doors minimize contamination, releasing automatically in the event of power failure ·
• Fluorescent lighting is housed in the ceiling to provide 300 lux level.
• These air showers and tunnels offer an effective way to remove surface-deposited particles from personnel before they get to the clean room Enter the clean room and leave particles behind Air showers and tunnels supply concentrated Class 100, clean air flows to remove contamination while an individual stands in a specially constructed air chamber. When an automatic switch inside the unit is activated, pressurized air streams from adjustable nozzles at a velocity of 6, 000 feet per minute, a force that supplies the sufficient scrubbing action necessary to remove particulate matter.

• Details :
• Minimum Velocity of 5000FPM - Cleanroom Air Showers are designed to supply ISO Class 5 (Class 100) airflow while removing particulate contamination from personnel entering a cleanroom. An individual can stand or walk through the chamber and be scrubbed by pressurized air from nozzles at a minimum velocity of 5000 FPM.
• HEPA Filters - HEPA filtered air flows through wall mounted nozzles and contaminated air is forced through secondary filters located near the floor.
• Lighting - Fluorescent lighting is provided in the ceiling.
• Voltage - Voltage options are 208-230, 50 or 60 Hz and 440/480 volts, 3 phase, 60 Hz.

National Enterprises presents its National Static pass box equipment, made of inner & outer 304 / 316 grades stainless steel and high quality components and are capable of eradicating pollutants completely from the air. These National static pass boxes are installed in manufacturing areas and filter the incoming air in order to keep the air free from dust and other contaminants. With UV light along with Hour meter, Fluorescent light, buzzer indicator to know the material is kept inside and indicating lamp, these National static pass boxes provide excellent working performance in the clean room unit.

National Bio safety cabinet class II A 2 is designed and fabricated by using advance machines and superior quality mild steel and stainless steel. It has dynamically balanced blower-motor assembly and 0.3 micron of particle retention. This bio safety cabinet class II A 2 has MCB and castor wheels to allow its movement. Our bio safety cabinet class II A 2 is extensively used in different laboratories for quarantining of material which have been contaminated by pathogens.

Features :

• Minimum vibration level.
• Inner & outer SS 304/Working Table is SS-304
• Two Stage filtration System.
• National Biosafety Cabinet
• A Unique combination of the most aerodynamic design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.

• National Enterprises one of the leading manufacturers of Sampling /Dispensing booth. This unit is made using premium quality inner & outer stainless steel304, which are sourced from the reliable vendors or the market. Our offered Sampling /Dispensing booth unit is provided with light weighted statically and dynamically balanced motorblower along with isolator, with an aim to reduce the noise levels. This National Sampling /Dispensing booth is available in the market at most comparative prices.
• Sampling /Dispensing booth has been designed to provide a Class 100 working environment at rest, with built-in scavenging system to ensure protection for the product, operator and surrounding environment.

Features :

• Minimum vibration level
• Complete Inner & Outer SS304/ Inner SS3404 & Outer GI powder coated
• Two Stage iltration/ Three Stage Filtration.
• A Unique combination of the most customizes design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.
• Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of air low requirement for entire life of HEPA. The blower is high performance, noise abated, light weighted statically and dynamically balanced
• SS 304 Double Walled Side Panels
• Mechanical Differential Pressure Gauge (0mm-25mm: 2 Nos.) to monitor pressure drop across intermediate filter
• Mechanical Differential Pressure Gauge HEPA filter (0mm-10mm: 1 No.) To monitor
• Pressure drop across PRE Filter with respect to ambient
• Electrical control panel mounted on the side panel of the unit
• LED/Tube Light
• ON/OFF Switches for motor
• 5/15 Amp single-phase switch socket for external equipment
• DOP Test port at upstream of HEPA filter
• Minimum vibration level.
• To provide DQ, IQ, OQ, & Warranty certificate Documentation.

National Dynamic Pass Box equipment are made of Inner & outer high grades stainless steel (304 / 316) with international quality standard components including mechanically or electrically interlocked doors and UV light. This National dynamic pass box equipment are equipped with suction filter made of stainless steel with 95% down to 5μ efficiency (EU-4rating) and supply filter made of aluminum with 99.999% down to 0.001 μ (EU-14 Rating.) An interlock guard system controls the inlet and the outlet of Pass Box not be opened at the same time, in order to prevent the cross contamination.

Holding the rich domain expertise, we are efficiently meeting the standards of the industry, while manufacturing National Mounting/Ceiling Laminar Air Flow Unit. This air low unit is made with premium quality PVC strip, poly carbonate and acrylic sheet, which is procured from the authentic sources of the market. This ceiling air low unit is MOC SS-304 and is acclaimed in the market for its high efficiency. Our National Mounting/Ceiling Laminar Air Flow Unit is widely demanded by the pharmaceutical industry as well as in huge chemical laboratories. For The protection for sterile packing / filling machine in the pharmaceutical industries. Used where bacteria and particle can have a destructive effect on the final product. The unit is supplied either to be mounted in the ceiling 4adjustable chains or with legs; Which optionally can be supplied with wheels.

Features :

• Compact design
• Low noise Level
• Excellent air low
• Vertical Laminar air low class-100
• Compact model available (1ft. Ht.)

Technical Specification :

• Two Stage filtration
• EU7 - Intermediate Filter (95% down to 3micron)
• EU14 - HEPA Filter - Supply / Exhaust (99.999% down to 0.3 micron)
• Statically & Dynamically balanced Motorblower with isolator to reduce noise level Fluorescent Lights
• Differential Pressure Gauges: 01 No. (HEPA Filter)
• ON/OFF Switches (BL / FL)
• DOP Port
• DQ, IQ, OQ, PQ Documentation

Optional Accessories :A wide range of configurations to suit any containment application :

• Rigid Barrier (Flexible PVC Strip / Poly
• carbonate / Acrylic Sheet)
• Velocity display with High / Low Alarms
• Filter chocking alarms
• Auxiliary Power Socket - 5/15 Amp for external equipment
• FLP Electrical Goods for Explosion
• LED light.

National Enterprises one of the leading manufacturers of National Horizontal/Vertical Laminar Air Flow. This unit is made using premium quality inner & outer stainless steel with front door & side glass and acrylic sheet, which are sourced from the reliable vendors or the market. Our offered air low unit is provided with statically balanced motor-blower along with isolator, with an aim to reduce the noise levels. This National Horizontal/Vertical Laminar Air Flow is available in the market at most comparative prices.

Features :

• Minimum vibration level.
• Inner & outer SS 304/Working Table is SS- 304 & Outer GI powder coated
• Two Stage filtration System.
• National Horizontal/Vertical Laminar Air Flow
• A Unique combination of the most aerodynamic design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.

Technical Specifications :

• Side panel with tempered Glass / Polycarbonate / Acrylic sheet.
• Two Stage filtration
• EU7 - Intermediate Filter (95% down to 3 micron)
• EU14 - HEPA Filter - Supply / Exhaust (99.999% down to 0.3 micron)
• Statically & Dynamically balanced Motorblower with isolator to reduce noise level
• Fluorescent Lights with Milky White Diffuser
• Differential Pressure Gauges - 01 No. (HEPA Filter)
• ON/OFF Switches (BL / FL / UV)
• DOP Port
• DQ, IQ, OQ, PQ Documentation

Optional Accessories :A wide range of configurations to suit any containment application :

• Front Door (Counter weighted, Hinged, acrylic Sheet /tempered glass
• Hour Meter for UV
• Air / Gas cock
• Velocity display with High / Low Alarms
• Filter chocking alarms
• Electrical Goods for Explosion
• LED light .

National Mobile laminar air flow units are used to safely transferring the product from non sterile area to sterile area. The unit is used in industrial manufacturing for protection of the product in Industries like Pharmaceutical, Bio-tech industries, Filling section, Assembling processes, Tissue culture and others. Further, the unit is ideal to protect product from particular contamination with the help of class 100 air & UV tube.

Technical Specification :

• Compact and transportable design.
• Construction material used in inner & outer complete SS-304.
• Provided with easy removable silicon wheels.
• Standard Size – 4x2x2, 3x2x2, 2x2x2 (Feet)
• Quiet operation 60db.
• Light intensity – 600 Lux level & UV tube is also provided to disinfect the bacterial growth.
• Class 100 work station.
• Available vertical, horizontal & mobile unit with battery backup.
• Counter balance weight glass shutter for ease of door operation.
• MOC SS304, MS Powder coated.
• Velocity 0.45m/s +/-20% below working area.
• Air re-circulating type model
• Power Supply 230 V/Single Ph.

Optional features :

• Provision of Sliding Door
• Material of Front Door 8mm Acrylic Sheet.
• Battery Backup 900 Hrs.
• Easy Removable SS PU Wheels
• Inner & Outer SS 304
• Digital Display with UV & Hepa Timer Facility.

Material :

• SS304/GI/MS. Design Concept Self-contained, pre-wired, fully equipped air shower/ tunnel systems help solve decontamination problems.
• HEPA filter/fan modules (rated 99.997% efficient @ 0.3 micron particles) wash personnel with Class 100 air to dislodge and remove particles.
• A control panel provides programmable control over access door operation · Interlocking doors minimize contamination, releasing automatically in the event of power failure ·
• Fluorescent lighting is housed in the ceiling to provide 300 lux level.
• These air showers and tunnels offer an effective way to remove surface-deposited particles from personnel before they get to the clean room Enter the clean room and leave particles behind Air showers and tunnels supply concentrated Class 100, clean air flows to remove contamination while an individual stands in a specially constructed air chamber. When an automatic switch inside the unit is activated, pressurized air streams from adjustable nozzles at a velocity of 6, 000 feet per minute, a force that supplies the sufficient scrubbing action necessary to remove particulate matter.

• Details :
• Minimum Velocity of 5000FPM - Cleanroom Air Showers are designed to supply ISO Class 5 (Class 100) airflow while removing particulate contamination from personnel entering a cleanroom. An individual can stand or walk through the chamber and be scrubbed by pressurized air from nozzles at a minimum velocity of 5000 FPM.
• HEPA Filters - HEPA filtered air flows through wall mounted nozzles and contaminated air is forced through secondary filters located near the floor.
• Lighting - Fluorescent lighting is provided in the ceiling.
• Voltage - Voltage options are 208-230, 50 or 60 Hz and 440/480 volts, 3 phase, 60 Hz.

National Enterprises presents its National Static pass box equipment, made of inner & outer 304 / 316 grades stainless steel and high quality components and are capable of eradicating pollutants completely from the air. These National static pass boxes are installed in manufacturing areas and filter the incoming air in order to keep the air free from dust and other contaminants. With UV light along with Hour meter, Fluorescent light, buzzer indicator to know the material is kept inside and indicating lamp, these National static pass boxes provide excellent working performance in the clean room unit.

National Bio safety cabinet class II A 2 is designed and fabricated by using advance machines and superior quality mild steel and stainless steel. It has dynamically balanced blower-motor assembly and 0.3 micron of particle retention. This bio safety cabinet class II A 2 has MCB and castor wheels to allow its movement. Our bio safety cabinet class II A 2 is extensively used in different laboratories for quarantining of material which have been contaminated by pathogens.

Features :

• Minimum vibration level.
• Inner & outer SS 304/Working Table is SS-304
• Two Stage filtration System.
• National Biosafety Cabinet
• A Unique combination of the most aerodynamic design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.

• National Enterprises one of the leading manufacturers of Sampling /Dispensing booth. This unit is made using premium quality inner & outer stainless steel304, which are sourced from the reliable vendors or the market. Our offered Sampling /Dispensing booth unit is provided with light weighted statically and dynamically balanced motorblower along with isolator, with an aim to reduce the noise levels. This National Sampling /Dispensing booth is available in the market at most comparative prices.
• Sampling /Dispensing booth has been designed to provide a Class 100 working environment at rest, with built-in scavenging system to ensure protection for the product, operator and surrounding environment.

Features :

• Minimum vibration level
• Complete Inner & Outer SS304/ Inner SS3404 & Outer GI powder coated
• Two Stage iltration/ Three Stage Filtration.
• A Unique combination of the most customizes design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.
• Motor Blower provided are statically and dynamically balanced, Supply of sufficient capacity and static pressure is used to take care of air low requirement for entire life of HEPA. The blower is high performance, noise abated, light weighted statically and dynamically balanced
• SS 304 Double Walled Side Panels
• Mechanical Differential Pressure Gauge (0mm-25mm: 2 Nos.) to monitor pressure drop across intermediate filter
• Mechanical Differential Pressure Gauge HEPA filter (0mm-10mm: 1 No.) To monitor
• Pressure drop across PRE Filter with respect to ambient
• Electrical control panel mounted on the side panel of the unit
• LED/Tube Light
• ON/OFF Switches for motor
• 5/15 Amp single-phase switch socket for external equipment
• DOP Test port at upstream of HEPA filter
• Minimum vibration level.
• To provide DQ, IQ, OQ, & Warranty certificate Documentation.

National Dynamic Pass Box equipment are made of Inner & outer high grades stainless steel (304 / 316) with international quality standard components including mechanically or electrically interlocked doors and UV light. This National dynamic pass box equipment are equipped with suction filter made of stainless steel with 95% down to 5μ efficiency (EU-4rating) and supply filter made of aluminum with 99.999% down to 0.001 μ (EU-14 Rating.) An interlock guard system controls the inlet and the outlet of Pass Box not be opened at the same time, in order to prevent the cross contamination.

Holding the rich domain expertise, we are efficiently meeting the standards of the industry, while manufacturing National Mounting/Ceiling Laminar Air Flow Unit. This air low unit is made with premium quality PVC strip, poly carbonate and acrylic sheet, which is procured from the authentic sources of the market. This ceiling air low unit is MOC SS-304 and is acclaimed in the market for its high efficiency. Our National Mounting/Ceiling Laminar Air Flow Unit is widely demanded by the pharmaceutical industry as well as in huge chemical laboratories. For The protection for sterile packing / filling machine in the pharmaceutical industries. Used where bacteria and particle can have a destructive effect on the final product. The unit is supplied either to be mounted in the ceiling 4adjustable chains or with legs; Which optionally can be supplied with wheels.

Features :

• Compact design
• Low noise Level
• Excellent air low
• Vertical Laminar air low class-100
• Compact model available (1ft. Ht.)

Technical Specification :

• Two Stage filtration
• EU7 - Intermediate Filter (95% down to 3micron)
• EU14 - HEPA Filter - Supply / Exhaust (99.999% down to 0.3 micron)
• Statically & Dynamically balanced Motorblower with isolator to reduce noise level Fluorescent Lights
• Differential Pressure Gauges: 01 No. (HEPA Filter)
• ON/OFF Switches (BL / FL)
• DOP Port
• DQ, IQ, OQ, PQ Documentation

Optional Accessories :A wide range of configurations to suit any containment application :

• Rigid Barrier (Flexible PVC Strip / Poly
• carbonate / Acrylic Sheet)
• Velocity display with High / Low Alarms
• Filter chocking alarms
• Auxiliary Power Socket - 5/15 Amp for external equipment
• FLP Electrical Goods for Explosion
• LED light.

National Enterprises one of the leading manufacturers of National Horizontal/Vertical Laminar Air Flow. This unit is made using premium quality inner & outer stainless steel with front door & side glass and acrylic sheet, which are sourced from the reliable vendors or the market. Our offered air low unit is provided with statically balanced motor-blower along with isolator, with an aim to reduce the noise levels. This National Horizontal/Vertical Laminar Air Flow is available in the market at most comparative prices.

Features :

• Minimum vibration level.
• Inner & outer SS 304/Working Table is SS- 304 & Outer GI powder coated
• Two Stage filtration System.
• National Horizontal/Vertical Laminar Air Flow
• A Unique combination of the most aerodynamic design with the highest product protection, operator comfort, versatility and reliability. Delivered with a strong table top made of stainless steel.

Technical Specifications :

• Side panel with tempered Glass / Polycarbonate / Acrylic sheet.
• Two Stage filtration
• EU7 - Intermediate Filter (95% down to 3 micron)
• EU14 - HEPA Filter - Supply / Exhaust (99.999% down to 0.3 micron)
• Statically & Dynamically balanced Motorblower with isolator to reduce noise level
• Fluorescent Lights with Milky White Diffuser
• Differential Pressure Gauges - 01 No. (HEPA Filter)
• ON/OFF Switches (BL / FL / UV)
• DOP Port
• DQ, IQ, OQ, PQ Documentation

Optional Accessories :A wide range of configurations to suit any containment application :

• Front Door (Counter weighted, Hinged, acrylic Sheet /tempered glass
• Hour Meter for UV
• Air / Gas cock
• Velocity display with High / Low Alarms
• Filter chocking alarms
• Electrical Goods for Explosion
• LED light .

National Mobile laminar air flow units are used to safely transferring the product from non sterile area to sterile area. The unit is used in industrial manufacturing for protection of the product in Industries like Pharmaceutical, Bio-tech industries, Filling section, Assembling processes, Tissue culture and others. Further, the unit is ideal to protect product from particular contamination with the help of class 100 air & UV tube.

Technical Specification :

• Compact and transportable design.
• Construction material used in inner & outer complete SS-304.
• Provided with easy removable silicon wheels.
• Standard Size – 4x2x2, 3x2x2, 2x2x2 (Feet)
• Quiet operation 60db.
• Light intensity – 600 Lux level & UV tube is also provided to disinfect the bacterial growth.
• Class 100 work station.
• Available vertical, horizontal & mobile unit with battery backup.
• Counter balance weight glass shutter for ease of door operation.
• MOC SS304, MS Powder coated.
• Velocity 0.45m/s +/-20% below working area.
• Air re-circulating type model
• Power Supply 230 V/Single Ph.

Optional features :

• Provision of Sliding Door
• Material of Front Door 8mm Acrylic Sheet.
• Battery Backup 900 Hrs.
• Easy Removable SS PU Wheels
• Inner & Outer SS 304
• Digital Display with UV & Hepa Timer Facility.