Our Products
Photo Frames & Picture Frames
1 Products availableIndustrial & Engineering Products
1 Products availableCompression Springs & Air Springs
1 Products availableMachines And Equipments
1 Products availableSheet Metal & Turned Components
1 Products availableNuts Bolts And Fasteners
1 Products availableBrake Parts
1 Products availableLeading Manufacturer, Supplier & Retailer of Nose Bars and Draft Gearing Unit.
We manufacture bottom rollers of high quality standards. The optimal groove angles and groove profile, along with special surface finish provide friction free smooth running and better fiber control over the rollers. We provide Cold Rolled Alternate Helical fluted rollers and Knurled rollers which provides more number of nipping points for better control of fiber and better cot life, precisely ground flutes to give better yarn quality and free from peak problems. Our rollers suits for 100% Cotton, Blends of Cotton and man made fiber or 100% man made fiber. We manufacture fluted rollers for various processes as mentioned below from 25mm diameter to 40mm diameter.
1.Gauge from 63.5mm to 130mm
2.Number of spindles between roller stands are 8, 6, 4 spindles.
Fluted Rollers Bottom Rollers Drafting Rollers Knurled rollers:
1.Diameters : 25mm, 25.4mm, 27mm, 28mm, 28.5mm, 30mm, 32mm, 35mm, 38mm, 40mm.
2.Flute length : 32mm, 35mm, 40mm, 45mm, 52mm
Laxmi Rieter LR G5/1
Laxmi Rieter LR-6
Laxmi Rieter LR-63
Laxmi Rieter 6A
Laxmi Rieter 6S
Laxmi Rieter 6AX
KTTM RXi 240
Suessen Finomax 1000
Textool 4A
Textool 5A
Textool 5HS
Textool 5HRS
Textool Narrow Width
Textool DJ-50
Textool DJ-500
Textool Worsted WS-60
Texmaco K2
Texmaco Hi-Spin
Texmaco Howa NMM - MEI -
Mark-I NMM - MEI -
Mark-II NMM - MEI -
Mark III
MMC Marzoli
Jeets - JSA
Jeets - JS 1
Jeets - JS 2
Jeets - JS 3
United Machine Works (UMW)
United Machine Works (UMW) worsted
Sathish Ring Frame
Sathish Worsted
Retex
RKI
Zinser 68 i
Marzoli
Toyoda RY-5
Platts
Platts Sacolowal
Rieter
NMM Worsted
NSC Worsted
We manufacture Cast Iron Roller Stand which are made out of high grade induction melt Cast Iron, Most precisely machined, perfect in all aspect suitable for Ring Frame and Speed Frame and Doubling Machine as per your requirement of various center height and various drafting angles like 45and 60 for Ring Frame and 15/ 10 for Speed Frame. We provide both Needle Bearing type Roller Stand and Bush Bearing type Roller Stand
1. We provide Roller Stand with and without slides for Middle and Back Lines.
2.We provide slides separately.
High performance step Type Nose Bar for short, medium and long cradle we can supply Nose bar( Bridge bar) according to your mills requirement which results in significant improvement of yarn quality, and also improvement in U%. |
1. Double Row Ball Bearing type:
Double Row Ball Bearing type tension device gives you friction free smooth rotation of the apron. Higher circumference of the rollers prevent sharp bending of the bottom aprons which results in long life of the bottom Aprons.
2. Aluminum Fork Type:
WE provide Pressure die cast Aluminum fork for both Ring frame and speed frames, this is the most economical and effective tension devices when compared with dead weight type rollers.
3.. Dead Weight type:
This the older version of tension Devises used earlier.
Nathan Industries Traverse Motion gearing unit along with other devices extends the life of the Top Roller Cots and also the life of Top and Bottom Aprons. The Travers can be adjusted according to the bottom Apron width.
The movement of the traverse motion can be adjusted from 6mm to 15mm according to your requirement. If necessary we can provide extra traverse ( movement )width as per your requirement.
Double column rigidly designed, maintenance free gearing unit, with case hardened Shafts and Gears and heavy duty ball bearings, at all points, are superior by virtue of their easy handling, simpler means of changing gears. We can provide 3 roller drafting arrangements with 45Degere and 60 degrees for Ring frames and for speed frame with 3 roller drafting system or 4 roller drafting system with 15degerees.
We also provide spare for draft gearing unit separately like:-
Middle roller support brackets- Right hand side & Left hand side, Back roller support brackets - Right hand side & Left hand side, Swivel Bracket
We manufacture Double Row Ball Bearing Top Rollers for Ring frames and Speed Frames. These Top Rollers are made out of Ball Bearing Steel machined by skillful hands in the modern machinery and assembly process to attain Top Quality by experience technicians. Our rollers provide friction free rotation for flawless yarn.
Features :
Drive Studs are manufactured out of special graded steel material to suit its requirement. All type of studs are induction hardened and ground to the required hardness at various places.
We manufacture the Gear end drive pieces, Pinions with various number of teeths like 10 teeth, 11 teeth, 16 teeth etc., and Off end pieces to your needs as per your Sample or Drawings.
We can also provide you ground gears for your requirement
Wind mill Brake pad and Friction material :
Friction materials are utilized in the braking systems of automobiles, commercial vehicles, aircraft, motorcycles, trains and off-road vehicles and in other industrial applications. In simple terms, these materials help stop vehicles as a part of the brake pad or drum brake lining.
The exact composition of a brake lining is often a closely guarded secret, and the process of achieving it almost as much an art as a science. Iron powder is a key ingredient in semi-metallic brake linings, enhancing both the performance and the long-term reliability and durability of the product.