GST : 27AAIPJ6480F1ZK
Verified
Write a Review
Our Products
Flanges
2 Products availableSeamless Pipes
2 Products availablePipe Tees
2 Products availableOur Complete range of products are Hastelloy X, Inconel 625, Inconel 718, Hastelloy C276 and Haynes 25 Nickel Alloys.
ALLOY X _ UNS N06002 Common Trade Names:Hastelloy X®, Nickelvac® HX, Nicrofer® 4722, Altemp® HX, Inconel® HX Inconel HX®, also known as Hastelloy X® is a nickel- chromium- iron- molybdenum alloy with great resistance to oxidation. Inconel HX® is used for components such as combustion chambers, tail pipes in aircraft and land-based gas turbine engines, fans and rollers in industrial furnaces. Inconel HX® is available as bar, rod, billet, extruded section, plate, sheet, strip, wire, pipe, and tube. The alloy oxidation resistance is outstanding up to 2200º F. For hot forming, the alloy should be heated to a starting temperature of 2150°F (1175°C). Inconel HX can be welded by metal arc, gas-tungsten- arc, gas-metal-arc, and submerged arc processes.
ALLOY 625 _ UNS N06625 Common Trade Names :Inconel 625®, Chronin® 625, Altemp® 625, Haynes® 625, Nickelvac® 625, Nicrofer® 020Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Typical applications for Alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications. International Specifications
Alloy 718 - UNS N07718 Common Trade Names :Inconel 718®, Nicrofer® 5219, Allvac® 718, Haynes® 718, Altemp® 718 Alloy 718 is a precipitation hardenable nickel-based alloy designed to display exceptionally high yield, tensile and creep-rupture properties at temperatures up to 1300°F (704°C). The age-hardening response of Alloy 718 permits annealing and welding without spontaneous hardening during heating and cooling. Alloy 718 has excellent weldability when compared to the nickel-base super alloys hardened by aluminum and titanium. Alloy 718 is used in aircraft engine parts and high-speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.
Alloy C276 _ UNS N10276 Common Trade Names:Hastelloy C276®, Nickelvac® HC-276, Inconel® C276, Nicrofer® 5716 Inconel C-276® is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments. Inconel C-276® is used in pollution control, chemical processing, pulp and paper production, and waste treatment.
Haynes 25TM Haynes 25TM has an excellent temperature strength and oxidation resistance to 2000 ºF. Haynes 25TM is hot formable between 1900 ºF- 2300 ºF. Also known as Alloy L605, it is better to cold-work Haynes 25TM for bending, spinning and drawing the components.
Cobalt Alloy 6B - UNS R30006 Common Trade Names:Stellite 6BAlloy 6b also know as Cobalt Alloy or Stellite 6B® is a cobalt-base alloy with excellent corrosion resistance to severe conditions and high temperatures. Alloy 6b is used for doctor blades, valve parts, pump plungers, knives, and bearings.
Rene 41TM - UNS N07041 Common Trade Names: Rene 41®, Allvac Rene® 41, Haynes® R-41, Udimet® R41Rene 41® is a nickel-chromium alloy that contains cobalt, molybdenum and some aluminum and titanium. Rene 41® has a high corrosion resistance, easily fabricated which makes Rene 41® usable to aircraft engine components such as turbine blades, wheels, combustion chamber liners and structural hardware. Rene 41® specifications are AMS 5545, AMS 5712, and AMS 5713.
Additional Information:
Packaging Details : Export packaging
Delivery Time : 1 day
Monel R405® UNS N04405 Monel R-405® is very similar to Monel R405® except for its greater sulfur content. Monel R-405® also has the same corrosion resistance and physical properties as the Monel R405® with a slightly different range of mechanical properties. Monel R-405® was developed for good machinability.
Titanium Grade 5/Titanium 6AL4V ELITitanium-6Al-4V ELI has an improved ductility, toughness in air, and saltwater environments. It is also used in a non-aged condition for maximum toughness.Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
alloy 36 - uns k93600 common trade names:invar 36®, nilo 36v, pernifer® 36uns k93600 also referred to by their trade names invar 36® and nilo 36® are nickel-iron alloys. The alloy retains good strength and toughness at freezing temperatures. Alloy 36 is used for measuring devices, laser components, thermostat rods, and transporting liquefied gases.international specifications
in 1715
werkstoff nr. 1.3912
These Non-Ferrous Metal Alloys are widely acclimated in the accomplishment of huge numbers of products. Our non-ferrous metal alloy supports versatile and stiffness strength. We offer economic price on our products which will definitely draw attention of our clients. We have captured the global market with our matchless non-ferrous metal alloy.
ni-span-c 902® _ uns n09902 ni-span c 92® consists of nickel, iron, titanium, and chromium. Ni-span c 92® is not stainless, therefore, it will acquire a red-brown oxide film when exposed to outdoor environments.
uns n08367 - alloy al6xn® uns n08367 also commonly referred to as al-6xn® alloy is a nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion. Auns n08367 retains high ductility and impact strength. Uns n08367 has been used for seawater heat exchangers, chemical process tanks and pipelines, offshore oil and gas production equipment, seawater heat exchangers.
mp35n® - uns r30035 mp35n® alloy is nickel-cobalt based alloy with a unique combination of properties. Mp35n® alloy’s toughness, high strength, ductility makes the alloy exceptionally resistant to stress- cracking and crevice. It has also outstanding corrosion resistance in salt water, chloride solutions, mineral acids, and in hydrogen – sulfides.
We have a rare quintessence of nickel alloys. Nickel has cogent contribution in global international market. We are pledged only for corrosion resistance alloys. Corrosion resistance alloy upgrade the unbreakable feature of our product. We have built up robust position in the entire nickel base alloys industry.
Maraging 350 / Maraging C350 / Vascomax C350TM Common Trade Names: Vascomax® 350Maraging C350TM is a nickel-maraging alloy. Maraging C350TM is a relatively soft but tough material, therefore, readily machined and formed. The aging process of Maraging C350TM raises the hardness to a level sufficient for many tooling applications.Typical applications of maraging steels are missile and rocket motor cases, wind tunnel models, landing gear components, high performance shafting, gears, and fasteners.
Alloy C22 _ UNS N06022 Common Trade Names:Hastelloy C22®, Inconel® 22, Nicrofe® 5621 Hastelloy C22® provides resistance to general corrosion, pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. Inconel 22® can be used for many applications such as marine, power, chemical processing, pollution control, paper processing, and waste disposal industries. Hastelloy C22® contains chromium, molybdenum, tungsten, and iron which makes the alloy resistant to corrosion in stagnant or flowing seawater. The alloy is formed by gas tungsten-arc, gas metal-arc, and shielded metal-arc processes.
nickel alloy 330® _ unsn08330 common trade names:alloy 330, ra330®, incoloy® 330, nicrofer® 3718 incoloy® 330 is high in nickel and chromium that provides good resistance to carburization, oxidation, and nitridation. Incoloy® 330 is welded easily by all conventional processes; it can be formed hot (between 1750-1200º f) and cold. Incoloy® 330 is used for industrial heating furnaces, muffles, retorts, boxed and baskets.
Haynes 188TM - UNS R30188 Common Trade Names:Haynes® 188, Udimet® 188 Conicro® 4023 Haynes 188TM is a cobalt-base alloy with excellent high temperature strength and great oxidation resistance up to 2000º F. Haynes 188’s has good resistance to sulfidation and good metallurgical stability, therefore Haynes 188TM can be easily fabricated. Haynes 188TM is useful in gas turbine applications such as flame holders, liners, combustors and transition ducts.
ALLOY 600 _ UNS N06600Common Trade Names : Inconel 600®, Nickelvac® 600, Ferrochronin® 600 Inconel 600® heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays. International Specifications • BS 3072-3076 (NA14)• DIN 17742• DIN 17750• DIN 17754• WERKSTOFF Nr 2.4816• TUV 305• AFNOR-NC 15 Fe
ALLOY 825 _ UNS N08825 Common Trade Names:Incoloy 825®, Nickelvac® 825, Nicrofer® 4221 Incoloy 825® is a nickel-iron- chromium alloy with titanium, copper, and molybdenum. Incoloy® 825 chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, intergranular corrosion, and stress- corrosion cracking. Incoloy 825® has good mechanical properties from moderately to high temperatures. The hot- working range for Incoloy 825® is 1600 to 2150º F. The material has good weldability by all conventional processes.
Maraging 250 / Maraging C250 / Vascomax C250TM
Maraging 250TM (also referred to as Maraging C250TM and Vascomax 250TM) is a vacuum induction melted plus vacuum arc melted, low-carbon, nickel-cobalt-molybdenum high temperature alloy capable of attaining yield strengths in excess of 240 ksi (1655 MPa) through a simple, low temperature heat treatment. Maraging 250TM exhibits good ductility at high strength levels and is readily welded. Maraging C250TM is one of a family of "maraging" nickel steels (including Maraging 300â�¢ and 350TM) which are ductile in the solution treated condition and attains ultrahigh tensile strength by aging at temperatures in the range of 850/950°F (454/510°C).
Maraging 300 / Maraging C300 / Vascomax C300TM Common Trade Names: Vascomax® 300, Maraging C300 Maraging 300® (also referred to as Maraging C300® and Vascomax C300® is a vacuum induction melted plus vacuum arc re-melted, low-carbon, nickel-cobalt-molybdenum high temperature alloy capable of attaining yield strengths in excess of 270 ksi (1862 MPa) through simple, low temperature heat treatment at 900°F (482°C). Maraging C300® exhibits good ductility at high strength levels. Maraging C-300® also displays excellent notch ductility and is readily welded. Maraging 300® is one of a family of "maraging" nickel steels such as Maraging 250® & Maraging 350® which are martensitic yet ductile in the solution treated condition and attain ultra-high strength through a single low temperature aging treatment
mp159® - uns r30159 mp159® alloy is a nickel-cobalt base alloy with the same characteristics as the mp35n® alloy. Mp159® has an excellent strength and ductility in temperatures up to 1100- 1200º f. Mp159® has stress corrosion and corrosion resistant to crevice corrosion and hydrogen.
nickel alloy a286® _ uns s66286 alloy a286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300º f. Alloy a286® can be hardened and strengthened by heat treatment. Alloy a286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.
CP Titanium & Titanium Alloys Grade 1 Titanium & Titanium Alloys Grade 1 is the softest titanium with the highest ductility, good cold formability which gives Titanium & Titanium Alloys Grade 1 an excellent resistance from mild to high oxidization.
Stainless 309/ AISI 309Stainless 309 offers a better corrosion resistance than the type 304 because of higher percentages of nickel and chromium. This alloy has been used for furnace parts, high temperature containers, weld wire, and fire box sheets. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Titanium Grade 9/Titanium 3AL2.5VTitanium-3Al-2.5V is a medium strength alloy with good weldability and cold fabricability for mildly reducing to mildly oxidizing media.Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Additional Information:
Packaging Details : EXPORT PACKAGING
Titanium Grade 19/Titanium Beta CTitanium Beta C is a heat treatable, very high strength alloy with good resistance to stress and corrosion in high temperature. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
