NST 1700 Series controlled atmosphere furnaces feature a chamber with Mitsubishi(Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled byShimaden(Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.

The benefits of an controlled atmosphere furnace

An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.

Gases

One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.

Temperature

Proper temperature control is of great importance to the experimental project. Temperatures that are too high or too low can cause problems in the process and may incur additional costs.Our furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.

Features:

• Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas.
• Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket.
• Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use.*Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
• Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
• Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
• Built-in computer interface.
• CE compliant

Safety

• Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
• Power failure protection resumes furnace operation right after the point of failure when power is reestablished.

Ultimate vacuum level for furnaces is around 100 Pa with all flange connections, and 1000 Pa with hose barb connections. Please keep in mind that our  atmosphere furnaces are NOT designed to be vacuum furnaces, the vacuuming part is mainly for users to pre-vac the chamber, before putting in inert or other protective gases.

Temperature Control:

• Controller: Shimaden fp93 (Japan) with 4 programs and 40 segments (ie. 4 x 10 segments or 2 x 20 segments).
• Maximum heating rate: 15°C per minute
• Minimum temperature: 300°C (recommend at least 800°C for longer heating element life)
• Maximum/constant temperatures: 1700°C/1600°C (Depends on gas environment)

NST 1700°C Atmosphere Muffle Furnace

NST-1700C Atmosphere has many advantages of uniform temperature field, low surface temperature, heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering, atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing, phase-shift trigger, controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing, silicon gel sealed cover, sealed door with silicon gel gasket and water cooling system, gas float through flow meter, then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth, which can pre-vacuum and pass H2, Ar, N2, O2, CO, NH3 and so on.

Features:

• Temperature controller: Shimaden FP9340 programmable segments (Shimaden fp93 made in Japan), It can separate into 4, 2, 1 programs, ie. 4×10 segments. FP93 have 6 PID controls, different PID are used for low, middle, high temperature for precise control.Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420or thermocouples is broken, “ON” on the board is off and “OFF” is on)There is Fahrenheit (F) and Celsius (C) for option.With 485 communication interface: which can stop the furnace automatically.
• Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened.
• Chamber:it is imported from Japan,   good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction.
• Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life.
• Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current.
• Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time.
• Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger
• Gas system:floating flow meter or digital flow meter is for option to control gas Speed.
• Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly.

NST-1600C Atmosphere has many advantages of uniform temperature field, low surface temperature, heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering, atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing, phase-shift trigger, controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing, silicon gel sealed cover, sealed door with silicon gel gasket and water cooling system, gas float through flow meter, then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth, which can pre-vacuum and pass H2, Ar, N2, O2, CO, NH3 and so on.

Features:

• Temperature controller: Shimaden FP93 40 programmable segments (Shimaden fp93 made in Japan), It can separate into 4, 2, 1 programs, ie. 4×10 segments.FP93 have 6 PID controls, different PID are used for low, middle, high temperature for precise control. Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420or thermocouples is broken, “ON” on the board is off and “OFF” is on) There is Fahrenheit (F) and Celsius (C) for option. With 485 communication interface: which can stop the furnace automatically.
• Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened.
• Chamber:it is imported from Japan,   good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction.
• Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life.
• Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current.
• Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time.
• Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger
• Gas system:floating flow meter or digital flow meter is for option to control gas Speed.
• Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly.

NST-High-vacuum High-temperature Microwave Research Furnace For Lab

The high-vacuum, high-temperature microwave research furnace is typically used for synthesis or sintering of magnetic materials, ceramics, metal powders.

Control system: Embedded system control mode, can be connected to PC, can realize data storage and printing function; can set multiple process curves, each curve can set 40 process parameters; with automatic / manual operation dual function;

Bring a protective atmosphere system;

NST 1400°C Max Controlled Atmosphere Muffle Furnace w/ PC Interface

NST 1400 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.

The benefits of an controlled atmosphere furnace

An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment. 

Gases

One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.

Temperature

Proper temperature control is vital to the success of your project as well. Temperatures that are too high or too low will cause problems with the process and could cost your company a significant amount of money. Across International furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.

Features

• Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas.
• Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket.
• Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use.
• Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
• Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
• Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
• Built-in computer interface.
• Long life type S thermocouple.

Safety

• Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
• Power failure protection resumes furnace operation right after the point of failure when power is reestablished.

NST 1700 Series controlled atmosphere furnaces feature a chamber with Mitsubishi(Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled byShimaden(Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.

The benefits of an controlled atmosphere furnace

An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.

Gases

One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.

Temperature

Proper temperature control is of great importance to the experimental project. Temperatures that are too high or too low can cause problems in the process and may incur additional costs.Our furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.

Features:

• Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas.
• Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket.
• Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use.*Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
• Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
• Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
• Built-in computer interface.
• CE compliant

Safety

• Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
• Power failure protection resumes furnace operation right after the point of failure when power is reestablished.

Ultimate vacuum level for furnaces is around 100 Pa with all flange connections, and 1000 Pa with hose barb connections. Please keep in mind that our  atmosphere furnaces are NOT designed to be vacuum furnaces, the vacuuming part is mainly for users to pre-vac the chamber, before putting in inert or other protective gases.

Temperature Control:

• Controller: Shimaden fp93 (Japan) with 4 programs and 40 segments (ie. 4 x 10 segments or 2 x 20 segments).
• Maximum heating rate: 15°C per minute
• Minimum temperature: 300°C (recommend at least 800°C for longer heating element life)
• Maximum/constant temperatures: 1700°C/1600°C (Depends on gas environment)

NST 1700°C Atmosphere Muffle Furnace

NST-1700C Atmosphere has many advantages of uniform temperature field, low surface temperature, heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering, atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing, phase-shift trigger, controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing, silicon gel sealed cover, sealed door with silicon gel gasket and water cooling system, gas float through flow meter, then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth, which can pre-vacuum and pass H2, Ar, N2, O2, CO, NH3 and so on.

Features:

• Temperature controller: Shimaden FP9340 programmable segments (Shimaden fp93 made in Japan), It can separate into 4, 2, 1 programs, ie. 4×10 segments. FP93 have 6 PID controls, different PID are used for low, middle, high temperature for precise control.Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420or thermocouples is broken, “ON” on the board is off and “OFF” is on)There is Fahrenheit (F) and Celsius (C) for option.With 485 communication interface: which can stop the furnace automatically.
• Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened.
• Chamber:it is imported from Japan,   good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction.
• Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life.
• Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current.
• Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time.
• Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger
• Gas system:floating flow meter or digital flow meter is for option to control gas Speed.
• Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly.

NST-1600C Atmosphere has many advantages of uniform temperature field, low surface temperature, heating or cooling promptly and so on. it is the ideal atmosphere muffle furnace for atmosphere protection sintering, atmosphere reducing in Industry, Scientific research institutes, Universities, which offer Heating element of Sic and double layer housing, phase-shift trigger, controlled silicon. Operation system is Shimaden 40-segments digital controller imported from Japan. The chamber is made of Polycrystalline alumina fibre. There is wind cooling system between the double walled housing to help the furnace heat or cool promptly. Sealed housing, silicon gel sealed cover, sealed door with silicon gel gasket and water cooling system, gas float through flow meter, then come out from back side, there are many gas inlets and gas outlets on the furnace with burning mouth, which can pre-vacuum and pass H2, Ar, N2, O2, CO, NH3 and so on.

Features:

• Temperature controller: Shimaden FP93 40 programmable segments (Shimaden fp93 made in Japan), It can separate into 4, 2, 1 programs, ie. 4×10 segments.FP93 have 6 PID controls, different PID are used for low, middle, high temperature for precise control. Over-temperature and over-current protection, shutdown automatically when thermocouple is broken( it will shut down power when temperature is higher than 1420or thermocouples is broken, “ON” on the board is off and “OFF” is on) There is Fahrenheit (F) and Celsius (C) for option. With 485 communication interface: which can stop the furnace automatically.
• Cover opening protection system: overtravel-limit switch is installed to protect user, it will cut off power when the cover is opened.
• Chamber:it is imported from Japan,   good performance of heat preservation, high reflectivity, even temperature field, good ability of anti thermal expansion and cold contraction.
• Heating elements:This furnace is installed with Sic to ensure uniform temperature field and long service life.
• Leakage protection function:the furnace is installed with leakage air switch, it will cut off power Automatically when electricity leak or current exceed rated current.
• Software controlling system:this furnace can control every parameter directly and observe PV and SV on the computer by communication interface and software, computer can draw and save actual heating curve, it is convenient to call these dates at any time.
• Controlling system: Power control: Chint; Controlled silicon:Germany Semikron 106/16E; Trigger:Phase-shift trigger
• Gas system:floating flow meter or digital flow meter is for option to control gas Speed.
• Vacuum system: Vacuum level can be 10-1 or 10-4 with German molecular pump. TW-1.5 vacuum pump is for option.Pre-vacuuming can help remove air in the chamber quickly.

NST-High-vacuum High-temperature Microwave Research Furnace For Lab

The high-vacuum, high-temperature microwave research furnace is typically used for synthesis or sintering of magnetic materials, ceramics, metal powders.

Control system: Embedded system control mode, can be connected to PC, can realize data storage and printing function; can set multiple process curves, each curve can set 40 process parameters; with automatic / manual operation dual function;

Bring a protective atmosphere system;

NST 1400°C Max Controlled Atmosphere Muffle Furnace w/ PC Interface

NST 1400 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.

The benefits of an controlled atmosphere furnace

An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment. 

Gases

One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.

Temperature

Proper temperature control is vital to the success of your project as well. Temperatures that are too high or too low will cause problems with the process and could cost your company a significant amount of money. Across International furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.

Features

• Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas.
• Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket.
• Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use.
• Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
• Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
• Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
• Built-in computer interface.
• Long life type S thermocouple.

Safety

• Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
• Power failure protection resumes furnace operation right after the point of failure when power is reestablished.