Verified
Write a Review
Our Products
Our product range contains a wide range of NST cn-150150 Tape Casting Film Coating Machine, NST Customizable Hot Melt Glue Coating Machine, NST-BeesWax Custom Laboratory Bees Wax Coating Machine, NST-MeltGlue Customizable Hot Melt Glue Coating Machine and NST -JY300 Coating Machine
NST Compact Tape Casting Coater w/ Vacuum Chuck (8″Wx14″L), Film Applicator & Optional 200ºC Dryer Cover
This product is widely used in various high-temperature coating research, such as ceramic film, crystal film, battery material film, special nano-film, and can adapt to the future development of high-temperature film-forming technology.
Additional Information:
Payment Terms : L/C, T/T, Western Union
This coating machine is suitable for all kinds of paper/cloth/leather/PET/aluminum foil/copper foil, etc.
Additional Information:
Payment Terms : L/C, T/T, Western Union
NST-BeesWax Custom Laboratory Bees Wax Coating Machine
Additional Information:
Payment Terms : L/C, T/T, Western Union
THIS COATING MACHINE IS SUITABLE FOR ALL KINDS OF PAPER/CLOTH/LEATHER/PET/ALUMINUM FOIL/COPPER FOIL, ETC.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Battery Production Slit Extrusion Slot Die Electrode Coating Machine For Continuous Coating And Intermittent Coating
Features:
Installation environment requirements
Supporting facility
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Technical Specifications
| Item | Technical parameters | Remark |
|---|---|---|
| Suitable for system | Ternary, lithium iron phosphate, lithium cobalt acid, lithium manganese acid, graphite, silicon carbon and other systems of battery positive and negative plate coating process | |
| Coating method |
Continuous coating, intermittent coating | Slit extrusion coating method |
| Oven section number | 1 section 0.8m oven | |
| Coating speed | 0 ~ 0.5 m/min | It depends on the drying condition |
| Operating substrate thickness | Aluminum foil (Al) : 8 ~ 30um copper foil (Cu) : 6 ~ 30um |
|
| Design width of roll surface | 300 mm | |
| Ensure the width of the coating | Less than 240 mm | |
| Home roll | Φ150mm | |
| Precision coating | ±1.5um | |
| Suitable for paste viscosity | 2000~12000 (mPas) | |
| Single-side dry coating thickness range | 10-250μm | |
| The solvent properties | Oily solvent NMP (s.g = 1.033, p. = 204 ℃) | |
| Aqueous solvent H2O/NMP (s.g = 1.000, p. = 100 ℃) | ||
| Suitable for solid content range | 20~85% | |
| Coating dimensional accuracy (mm) | L≤±1,W≤±0.4 | L:length direction W:width direction |
| Front and back alignment accuracy (mm) | L≤±1,W≤±0.4 | |
200C MAX. COMPACT LAB AUTOMATIC MINI TABLET FILM COATER( 10″WX16″L ) FOR BATTERY ELECTRODE COATING
NST-H200T is an NRTL standard Compact Tape Casting Coater with the vacuum chuck hotplate up to 200ºC and the active carbon filter on the top cover to protect lab environment. It is an excellent tool to make high-temperature polymer coating or conductive ceramic film on various substrates.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Power | · 110V AC 50/60Hz · 1500W |
|---|---|
| Heatable Vacuum Platform | · Vacuum chuck made of aluminum alloy with micro-size hole · Vacuum chuck Area: 250mm(W) x 400 mm(L) ( 10″W x 16″ L ) · Heating elements are installed inside chuck which can reach 200ºC Max. · Precision digital temperature controller with +/- 1ºC accuracy |
| Vacuum Pump (Optional) | · A vacuum pump is required, （Included） |
| Film Applicator | ·Built in pushing bar for using micrometer adjustable applicator. ·200 mm width Applicator with micrometer adjustable head is included for immediate use ·24VDC motor driven the pushing bar continuously to the adjustable position, which can be used under Ar gas glovebox. Note: Thinnest film can be achieved is > 10 micron |
| Max. Coating Area | · 350mm(L) x 200mm(W) （Can be customized） |
| Accuracy of Film thickness | · +/- 0.01mm |
| Traverse Speed & Distance | · Travel Speed: 0 – 80mm/sec variable · Travel distance: 0 – 400 mm adjustable |
| Top Cover and Filter | · Active carbon filter and venting fan are installed on the top cover · The filter will remove organic vapor to make lab environmental safe & clean |
THE PLASMA SPUTTERING AND EVAPORATION TWO-IN-ONE COATING MACHINE is equipped with DC sputtering target and thermal evaporation assembly, which can not only be used for metal film plating by plasma sputtering, but also obtain carbon or other metal elemental films by evaporation. The instrument components are highly integrated, which realize two kinds of coating functions in the same chamber. This coating machine adopts high purity quartz chamber as vacuum chamber, and the coating process is completely visible. The instrument is equipped with two stage rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa, and can meet the vacuum environment required by most evaporation coating experiments and diode sputtering experiments. This instrument has small size which can save space and can be used on the test bench. One machine has multiple purposes, which is cost-effective and very suitable for major universities and research institutions to choose.
Small two-in-one coating machine applications:
Scanning electron microscope sample surface gold spraying, gold steaming carbon spraying and other operations, as well as the production of non-conductor material test electrode.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Sample Stage | Size | φ80mm | Distance to the evaporation source | 20mm~50mm adjustable |
|---|---|---|---|---|
| DC sputtering head | Number | 2”×1 | ||
| Evaporation system | Evaporation source | Tungsten wire basket | Max Temperature | 1700℃ |
| Thermal couple | S type thermocouple | |||
| Vacuum Chamber | Chamber Size | φ180mm×150mm | Watch Window | Omnidirectional transparency |
| Chamber Material | High purity quartz | Opening mode | Top cover removable | |
| Vacuum System | Mechanical Pump | Rotary vane pump | Pumping connector | KF16 |
| vacuum measurement | Resistance gauge | Exhaust connector | KF16 | |
| Ultimate vacuum | 1.0E-1Pa | Power Supply | AC;220V 50/60Hz | |
| Pumping rate | Rotary vane pump：1.1L/S | |||
| Sputter Power Configuration | Number | DC power supply x1 | Max Power Output | 150w |
ULTRA-HIGH VACUUM THERMAL EVAPORATION COATER is equipped with 4 evaporation heating boats, each of which can be independently evaporation coating.There is a rotatable baffle above the heating boat. When one of the heating boats is working, the baffle will cover the other three tungsten boats to prevent contamination of the vapor deposition materials.If the partial configuration is changed, the evaporation coating of the organic material can be realized, which can meet the research requirements of the light-emitting device and the organic solar battery, and it is an experimental device with an ideal coating effect and high cost performance.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Input & Output Power | Input: 208 – 240VAC, 20 A, 50/60 Hz, single phase Total Power required: 8KW (including pump) other 3 phase voltage is available upon request Output: 5VAC max. and 300A Max. |
|---|---|
| Vacuum Chamber | Stainless steel chamber: 280mm ID.×375 mm Height, (~23Liter) Sand-blasting electrolytic polishing surface 100 mm observation window in front of chamber Hinged type door for easy sample loading Manually operated shutters are on top of each evaporation W boat, which allow evaporating 4 kinds of material one by one 4 KF40 ports built in chamber for connecting to necessary device |
| Vacuum Pump | High-speed turbo vacuum pump is included and connected to the vacuum chamber. Vacuum speed: 600L/S Vacuum level: 5.0×10-6 Torr ( after 40 minutes pumping ) Limit vacuum: 5.0×10-7 Torr (after baking at 100 -150°C) Leaking rate: 5.0×10-7 Pa. Vacuum port: 150 mm diameter |
| Evaporation Source &Sample Holder |
Four tungsten heating boats are included supported by water cold electrodes Tungsten heating boat has dimension 70mm L x 12 mm W x 3 mm H. Spare W boat is available at extra cost。 Each top of boat has a manual operation shutter Built in manual shutter allows evaporation source can be used without contamination 100 mm diameter rotating sample holder is on top of the chamber with diameter 260mm, which can be heated up to 600°C max. via digital temperature controller with +/1 °C accuracy The distance between evaporation source and sample holder is 150-300 mm adjustable |
| Control Unit | Vacuum, thickness and power control are integrated into one control box Control Unit is separated from vacuum chamber for easy moving You may place the control unit on the top of vacuum station |
| Overall Dimensions | L600mm×W860mm× H1500mm |
| Net Weight | 600 kg |
| Facility Requirement for Installation | Space: 250 SF with height > 6 feet Power: 208 – 240V AC, single phase with Max 10KW ( 50A breaker) Water: > 15L/minute flowing water required for electrode cooling. |
NST-5-INCH CLOSE-RANGE ROTARY EVAPORATION COATING FURNACE is a rapid thermal processing furnace with 11″ I.D. quartz chamber. It is designed for Thermal Evaporating or CSS (Close Spaced Sublimation) film coating up to 5″ Dia. circular samples and 800°C Max. The furnace is heated by two group of halogen heaters (Top and Bottom) separately with max. 10/s heating rate. Two 30 segment precision temperature controllers are built in with +/-1ºC accuracy. RS485 port and control software are included to allow for the operation of furnace and temperature profile logging via PC. It is an excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskite solar cell.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Furnace structure & Vacuum Chamber | Two temperature controllers. The chamber is made of high purity fused quartz tube. Quartz tube size: 11″ OD/10.8″ ID×9″ H The vacuum flanges are made of Stainless Steel 316. |
|---|---|
| Vacuum Flanges | Top Flange with one KFD-25 vacuum port and one gas outlet(1/4″ pipe required) can slide up or down manually to load and unload substrate and evaporated material easily. Bottom flange has one KFD-25 vacuum port with one gas inlet (1/4″ pipe required) with needle valves. The flange is sealed by double silicone o-rings and can achieve max. the vacuum pressure of 10E-2 Torr by a quality mechanical pump and 10E-5 Torr by a molecular pump (vacuum pump is not included, please order separately). One digital vacuum gauge is installed on the top flange. Precision anti-corrosion digital vacuum gauge is in standard package. |
| Gas Flow Control | Gas mixer integrated with two float-meters with adjustable measurement ranges of 16 -160 mL/m |
| Heater and Sample Holder | Two independently controlled heaters with a manually adjustable gap from 2-30 mm. 20 pcs Halogen lamps are used as the heating element for rapid thermal processing. Heaters are is made of stainless steel with water cold jacket to reduce heat radiation and allow for fast cooling. 5″ Dia. the circular wafer holder is built into the top heater for holding the substrate. One set of high thermal-conductive AlN plates or graphite plate (5″ Dia.×0.5mm Thick) is included (place on the bottom for evaporating material ) A 58L/min circulating water chiller is included for saving water source |
| Temperature Controller | Two precision digital temperature controllers with 30 segments programmable offer independent control of the top and bottom heaters. Each controller has PID autotune function to protect heaters from overshooting and an alarm function to avoid overheating and a thermal couple are broken. PC communication interface & software is installed for recording temperature profile. |
| Working Temperature | Maximum temperature for each heater: <= 800℃. Maximum temperature difference between two heaters: <= 300℃ depends on the spacing between two heaters: Spacing 30mm Max. temp difference: 315℃ heating bottom only |
| Heating & Cooling Rate | Heating: < 8℃/s ( heating single heater only ) Cooling: < 10℃/s (600 – 100℃) Max. |
| Thermal Couple | Two K-type thermal couples are installed on top and bottom heaters separately. |
| Working Voltage | 220VAC, Single Phase, 60A Air Breaker required |
| Power Requirement | 9.5KW total |
| Dimensions | 1085mm L×680mm W×1710mm H |
| Warranty | One year limited with lifetime support (Consumable parts such as quartz tube and heating lamps are not covered by the warranty). |
TWO IN ONE FILM COATER can meet the requirements of the surface of the scanning electron microscope sample for spraying gold, steaming gold or carbon evaporating, and the production of experimental electrodes for non-conductor materials, and can also be used for the experiments of various new materials in material research.The machine is small in size, saves laboratory space, easy to operate, easy to clean, suitable for beginners, especially suitable for use in laboratories, research institutes, and laboratories of various universities.
Additional Information:
Payment Terms : L/C, T/T, Western Union
ORGANIC AND INORGANIC EVAPORATION COATER adopts linear structure and is mainly composed of two organic material growth chambers which are connected by gate valves. One of the two growth Chambers is reserved for the butt joint interface with the glove box, which can complete the transfer of substrates between two independent film preparation systems. The organic material growth chamber mainly consists of vacuum chamber assembly, organic evaporation source, thermal resistance evaporation boat, sample transfer device, sample platform, film thickness monitor, vacuum chamber lighting device, baking device and so on.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Vacuum chamber | Two D-shaped vacuum chamber, size: aboutΦ450×H750; Two vacuum chamber of the vacuum system configuration, extreme pressure, vacuum recovery time, thermal resistance evaporation boat and power supply, the film thickness monitor, vacuum chamber lighting equipment, baking equipment, sample platform configuration , The above configuration is the same as the technical parameters | |
|---|---|---|
| Vacuum system configuration | Japanese cryopump, oil-free vortex dry pump and electromagnetic valve, compound digital-displayed vacuum measurement auge and meter, valves etc. | |
| Ultimate pressure | ≤2.0×10-5 Pa | |
| vacuum recovery time | Reach 1×10-4 Pa in 40 mins | |
| Electric magnetic coupling sample transfer device | Vacuum chamber 1 | It adopts magnetic coupling line motion delivering device and is driven by stepper motor, It is equipped with remote manual control box to control straight forward and backward |
| Organic evaporation source and power | Vacuum chamber 1 | 9 new model OEL sublimation evaporation source, each filled with 10CC evaporation material, room temperature-800℃: 7; room temperature-1000℃: 2; evaporation source power: 4 |
| Vacuum chamber 2 | 6 new model OEL sublimation evaporation source, each filled with 10CC evaporation material, room temperature-800℃: 6; room temperature-1000℃: 2; evaporation source power: 4 | |
| Heat resistance evaporation boat and power | New model evaporation boat: 2 (heat resistance evaporation boat); digital heat resistance evaporation power: 1, with fine adjustment function (0.1A); aluminum coated special purpose box evaporation boat: 2; metal evaporation boat: 10; evaporation source baffle: 2. | |
| Film thickness monitor | Thickness resolution ratio | Non-uniformity: 0.0133Å/measure; 50 samples average: 0.002Å/measure |
| Velocity resolution ratio | Non-uniformity: 0.0133angstrom per second; 50 samples average: 0.02 angstrom per second | |
| Precision | 0.03HZ/measure, 2ppm | |
| Speed | Measuring 10 times per second | |
| Vacuum chamber lighting device | LED lighting outside chamber, to prevent film coating contaminate lighting | |
| Baking device | A method of baking in a vacuum outdoor baking strip | |
| Sample table | Sample size | Load one 100×100mm or 50×50mm substrate |
| Mode of motion | Power driven lifting, rotatable, rotating speed 0-30rpm, rotating speed adjustable | |
ELECTRON BEAM EVAPORATION COATING SYSTEM is used for preparing conductive film, semiconductor film, ferroelectric film, optical film, etc. It is widely used in colleges and universities, scientific research institutions and small batch production.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Structure | U-box front opening vacuum chamber, rear-mounted pumping system | |
|---|---|---|
| Vacuum chamber | 500×500×600mm2 | |
| Vacuum system configuration | Compound molecular pump, mechanical pump, gate valve | |
| Ultimate pressure |
≤6. 67×10-5Pa (after baking and degassing) | |
| Vacuum recovery system | It can reach 6.67×10-4pa in 45 minutes (after the system is exposed to the atmosphere for a short time and is filled with dry nitrogen) | |
| Electron beam evaporation source | E type electron gun | Anode voltage: 6kv、8kv; |
| Quantity (set) | 1 | |
| Crucible | Water-cooled crucible, four point design, each capacity of 11ml | |
| Power | 0~6 KW adjustable | |
| Resistance evaporation source (optional) | Voltage | 5, 10V |
| Power | Current 300A，the maximum output 3kw | |
| Quantity | One set, Switchable | |
| Water cooling electrode | Three roots, make up two evaporation boats | |
| Type and size of workpiece frame | Substrate size: compatible with 4″substrate Max substrate heating temperature 800℃±1℃ Substrate rotates continuously, rotation speed:5-60 rpm The distance between the substrate and the evaporation source is adjustable from 300 to 350mm Manually controlled sample baffle assembly: 1 set |
|
| Gas circuit system | 1-circuit 200SCCM mass flow controller | |
| Quartz crystal oscillation film thickness controller | Thickness monitoring range: 0~99u9999A; | |
| Space occupied | Main Set | 900×800mm2 |
| Electrical Cabinet | 800×800mm2 (two) | |
SMALL HIGH VACUUM THERMAL EVAPORATION COATER instrument is a high vacuum compact thermal evaporation coater with evaporation temperature from 200 to 1700. The tungsten wire basket is used as the evaporation source, and the evaporation source is built in at the bottom of high purity alumina crucible. The upper cover is equipped with a rotatable sample stage, which can effectively improve the uniformity of film formation. The instrument has a high-precision temperature control system and uses circulating heating method, which can stabilize the evaporation of metals and organic matter. Stainless steel high-vacuum chamber design, with high-precision molecular pump, can achieve high vacuum requirements, the high vacuum can effectively improve the efficiency and quality of the evaporation coating.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Sample stage | Size | Φ65mm | Distance to evaporation source | 60mm~100mm adjustable |
|---|---|---|---|---|
| Rotary speed | 1-20rpm adjustable | |||
| Evaporation system | Evaporation source | Tungsten wire basket | Max temperature | 1700℃ |
| Thermocouple | S type thermocouple | |||
| Vacuum chamber | Chamber size | φ170mm × 200mm | Observation Window | Quartz observation window φ70 |
| Chamber material | Stainless steel | Opening way | Top cover open | |
| Vacuum system | Model | NST-GZK103-A | Pumping interface | KF40 |
| Molecular pump | NST-600 | Exhaust interface | KF16 | |
| Backing pump | Rotary vane pump | Vacuum measurement | Compound vacuum gauge | |
| Ultimate vacuum | 1.0E-5Pa | |||
| Pumping ate | Molecular pump: 600L/S rotary Rotary vane pump: 1.1L/S comprehensive pumping performance: 20 minutes vacuum up to: 1.0E-3pa |
|||
| Other parameters | Supply voltage | AC220V,50Hz | Dimensions | 600mm×300mm×470mm |
| Total power | 1.5kw | Total weight | 40kg | |
THE PLASMA SPUTTERING AND EVAPORATING TWO-IN-ONE FILM COATER is equipped with DC sputtering target and thermal evaporation assembly, which can be used not only for plasma sputtering, but also obtain carbon or other metal simple films by evaporation. In order to improve the coating quality, this two-in-one film coater adopts stainless steel vacuum chamber with high vacuum design of precision molecular pump, high vacuum degree can effectively improve the purity and uniformity of coating, which is conducive to get better experimental results. The sample stage has the function of rotation and heating, which can improve the film adhesion and film uniformity. The instrument is small in size, saves space, and can be placed on the test bench. It is very suitable for universities and research institutions.
Small high vacuum two-in-one film coater applications:
Scanning electron microscope sample surface gold spraying, steaming gold, carbon spraying and other operations, as well as the preparation of non-conductor material test electrodes.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Sample stage | Size | φ138mm | Temperature accuracy | ±1℃ |
|---|---|---|---|---|
| Heating temperature | Max 500℃ | Rotary speed | 1-20rpm adjustable | |
| DC sputtering head | Quantity | 2” ×1 | ||
| Evaporation system | Evaporation source | Tungsten wire basket | Max temperature | 1700℃ |
| Thermocouple | S type thermocouple | |||
| Vacuum chamber | Chamber size | φ170mm × 200mm | Observation Window | Quartz observation window φ70 |
| Chamber material | Stainless steel | Opening way | Top cover open | |
| Vacuum system | Model | NST-GZK103-A | Pumping interface | KF40 |
| Molecular pump | NST-600 | Exhaust interface | KF16 | |
| Backing pump | Rotary vane pump | Vacuum measurement | Compound vacuum gauge | |
| Ultimate vacuum | 1.0E-5Pa | |||
| Pumping rate | Molecular pump: 600L/S rotary Rotary vane pump: 1.1L/S comprehensive pumping performance: 20 minutes vacuum up to: 1.0E-3pa |
|||
| Sputter power configuration | Quantity | DC power supply×1 | Max output power | 150w |
| Other parameters | Supply voltage | AC220V,50Hz | Dimensions | 600mm×300mm×470mm |
| Total power | 1.5kw | Total weight | 40kg | |
SMALL EVAPORATION COATING MACHINE has a high precision temperature control system, using the cycle heating method, can stably evaporate metal and some organic matter. Using high purity quartz cavity as vacuum chamber, coating process can be seen completely. The instrument is equipped with bipolar rotary vane vacuum pump, which can quickly reach the vacuum degree of 1.0E-1pa and meet the vacuum environment required by most evaporation and coating experiments. This instrument is suitable for evaporation and coating most of the metal and some organic materials film. It has compact structure and small size, which is a cost-effective laboratory coating equipment.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Sample Stage | Size | φ80mm | Distance to the evaporation source | 20mm~50mm adjustable |
|---|---|---|---|---|
| DC sputtering head | evaporation source | Tungsten wire basket | Highest Temperature | 1700℃ |
| Thermal couple | S type Thermal couple | |||
| Vacuum Chamber | Chamber Size | φ180mm×100mm | Watch Window | Omnidirectional transparency |
| Chamber Material | High purity quartz | opening mode | Top cover removable | |
| Vacuum System | Mechanical Pump | Rotary vane pump | Pumping connector | KF16 |
| vacuum measurement | resistance gauge | Air exhaust connector | KF16 | |
| Ultimate vacuum | 1.0E-1Pa | Power Supply | AC;220V 50/60Hz | |
| Pumping rate | Rotary vane pump：1.1L/S | |||
| Other |
Supply Voltage | AC220V,50Hz | Overall size | 360mm×300mm×470mm |
| Total Power | 800w | Total Weight | 15kg | |
PRECISION TEMPERATURE CONTROLLED HI-VACUUM THERMAL EVAPORATING COATER has a wide application range and can prepare various metal thin films and organic thin films, and thus is widely used for electrode preparation and preparation of organic light-emitting LEDs.This equipment is small in size, which can effectively save laboratory space; it is easy to operate and has strong adaptability to different materials, so it is widely used in the laboratories of universities and research institutes.
Precision temperature controlled hi-vacuum thermal evaporating coater features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Input Power | Input voltage: 208 – 240 VAC 50/60 Hz, single phase Input Power: 500 W Output Power : 40 A max current. Recommended working current <30 A Power cable included without plug |
|---|---|
| Temperature Control & Heaters | Tungsten coil heater with a thermocouple is built in at the bottom of alumina crucible (for temperature control. Standard S type thermocouple (included and installed) – heating from 200℃ – 1500℃ Optional B-type thermocouple (at extra cost) – heating from 1200 ºC – 1700℃ One digital temperature controller with 30 programmable segments and +/- 1℃accuracy The time settings of temperature controller are in seconds. Recommend to limit the temperature heating / cooling rate to 0.3℃/s (or 20℃/min) below 1200 ºC, and limit to 0.15 ℃/s (or 10℃/min) from 1200 – 1700℃ For continuous heating above 1300℃, please limit the operation time to less than 1 hour to preserve the service life of bottom flange O-ring. For fast coating up to 2000℃, such as needed in Carbon coating, the user can remove thermocouple, alumina thermal block, and alumina crucible, load evaporation material directly into the tungsten coil heater, and use current manual control mode. Four alumina crucibles (up to 1700℃) and two tungsten coil heaters are included. |
| Sample Holder | One 50 mm Dia. rotatable sample stage and its shutter are installed on top flange. Rotating speed: 5 rpm The distance from sample holder to evaporation source is adjustable from 40 mm to 85 mm |
| Vacuum | KF25 vacuum port is installed to connect to a vacuum pump The highest vacuum may reach <4.0E-6 Torr by pumping overnight with optional Turbomolecular pump A vacuum pump is required for coating. Please choose from the following Product Options No vacuum pump. Anti-Corrosive Capacitance Diaphragm Gauge is included for vacuum up to 1.0E-6 Torr. Double Stage Rotary Vane Vacuum Pump with vapor trap to eliminate the oil mist, which can reach vacuum up to 1.0E-2 Torr for evaporating noble metallic materials, such as gold, silver, and organic materials. Anti-Corrosive Capacitance Diaphragm Gauge is included. Compact Turbomolecular Vacuum Pump System is able to provide vacuum level up to 2.0E-5 Torr for evaporating oxygen sensitive materials, such as Al. Mg, Li, etc. A combined Pirani and cold cathode gauge are included with pump to measure vacuum up to 1.0E-8 Torr. |
| Gas Inlet | 1/4 tube fitting is built in for chamber purge or forming gas processing One needle valve is built-in to control gas flowing rate |
| Quartz Chamber Dimension | O.D.:165mm I.D.: 150mm Length: 250mm |
| Warranty | One year limited warranty with lifetime support |
NST-100-500mm Custom Laboratory Compact Doctor Blade Coating Machine
Additional Information:
Payment Terms : L/C, T/T, Western Union
The biggest advantage of the film coating machine is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. The coating head is made of stainless steel U-shaped scraper, which simulates the large coating head to ensure that the experimental product matches the quality of the production coating. The coating head can be opened quickly at 90 degrees to clean the blade after each experiment.
The laboratory small coating machine all adopts high-quality accessories, and the price is excellent and cheap. It has won the favor of many multinational enterprise R&D institutions and many well-known universities at home and abroad. By controlling the speed and the stable pressure to ensure the coating effect, to ensure the uniformity of the coating and the smoothness of the laboratory, the biggest features of the small coater can be in the plane of paper, plastic, metal, PVC, PET, cloth, aluminum alloy plate, etc. The materials were subjected to coating experiments.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 10 Days
NST SMALL BATTERY FILM COATER MACHINE OF 200 ° C FOR LITHIUM BATTERY
The biggest advantage of the laboratory small coater is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. The coating head is made of stainless steel U-shaped scraper, which simulates the large coating head to ensure that the experimental product matches the quality of the production coating. The coating head can be quickly opened to clean the blade after each experiment.
The laboratory small coaters all use high-quality accessories, and the price is excellent. It has won many R&D institutions of multinational corporations and is favored by many famous universities at home and abroad. By controlling the speed and the stable pressure to ensure the coating effect, to ensure the uniformity of the coating and the smoothness of the laboratory, the biggest features of the small coater can be in the plane of paper, plastic, metal, PVC, PET, cloth, aluminum alloy plate, etc. The materials were subjected to coating experiments.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Laboratory Compact Film Coater With Infinitely Variable Speed
Features
The biggest advantage of the laboratory small coater is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. 4. Spread the bed for a flat glass.
The laboratory small coaters all use imported accessories, and the price is excellent. It has won many R&D institutions of multinational corporations and is favored by many famous universities at home and abroad. By controlling the speed and the stable pressure to ensure the coating effect, to ensure the uniformity of the coating and the smoothness of the laboratory, the biggest features of the small coater can be in the plane of paper, plastic, metal, PVC, PET, cloth, aluminum alloy plate, etc. The materials were subjected to coating experiments.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 10 Days
NST-MRX300 is a automatic battery electrode coating system with a compact footprint that is less than 6’x3′. It uses transfer coating technique for better coating uniformity and is perfect for research or building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries. It is integrated with the functions/ features of metallic foil roll unwinding (reeling out), slurry feeder, coating blade, baking oven, and final electrode winding (reeling in) together with touch screen operation for customer’s the most convenience.
Max. Coating Length
Coating Modes
Warranty
Additional Information:
Payment Terms : L/C, T/T, Western Union
Adjustable Wet Film Applicator With Digital Display Micrometer
Description:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
200ºC MAX. AUTOMATIC FILM COATER WITH DRYER COVER AND 140MM DOCTOR BLADE
TMAX-JK-TMJ-200 is a CE Certified ready compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 140 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 200°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Stroke Length | 10 – 220 mm adjustable by using Adjustable Position Switch |
|---|---|
| Platform | Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 365mm(L) x 200mm(W) |
| Accessories: Film Applicator | Optional 50 upto 180 mm width micrometer film applicator is included, with adjustable thickness from 0.01 mm – 2 mm Traverse Pusher is included for pushing the doctor blade to ensure constant speed coating Note: Thinnest film can be achieved is > 10 micron |
| Optional Heating Cover Voltage and Power | 110VAC or 220VAC |
| Traverse Speed | 0 – 50 mm/sec variable |
| Vacuum Pump | Vacuum pump is included |
| Heating Cover | 1. Pre-installed on the top cover 2. Built in digital temperature controller with accuracy of +/-1°C 3. Suspension support helps open cover easily and safely 4. Max. Heating Temp.: 200°C |
| Compliance | CE Certificate |
| Warranty | One Year limited warranty with lifetime support |
Summarization:
This equipment is for small coating in the laboratory, can finish the cathode/anode coating and do the first baking.It’s portable and flexible, is the ideal equipment for laboratory.
Main characteristic:
adopt the electric heating and heat conduction, unique large heating, to make sure the high precision and uniform heating, Use of water vapor own characteristic, let the automatic discharge, beardless another power, energy conservation and environmental protection.
Coating speed 0100mm/s, can adjust.The vacuum plate can quickly place or take down cupper foil, aluminium foils , etc. Reduction motor stepless variable speed, equipped with vacuum aluminum plate and temperature and time of the digital display.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 30 Days
NST-SPUTTERING IS A COMPACT PLASMA SPUTTERING COATER designed for making metallic coatings, such as gold, platinum, Indium and silver etc. Especially for coating conductive gold film for SEM sample. The plasma sputtering coater is shipped with all necessary accessories for immediate use, including one sputtering head with gold sputtering target (gold cathode), Vacuum pump, stainless steel bellows and quick clamps.
Vacuum Accessories
The followings are included:
Application Notes
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| Input Power | 208V – 240V, 50/60 Hz, < 1000W (including pump) 110V power is available by using a 1000W transformer (15A fuse). The transformer is sold separately. |
|---|---|
| Specimen Chamber | Fused glass tube, 100 mm Dia. x 130mm Height Stainless steel flange |
| Specimen Stage | 40mm Dia. Height of the stage is adjustable |
| Gas Atmosphere | One needle valve installed to allow Ar gas flow to achieve better plasma coating. |
| Targets | 4N purity Gold foil: 57 mm Dia. x 0.12 mm ( Included and pre-installed on coater ) |
| Overall Dimensions | L 480mm x W 320mm x H 150mm |
| Shipping Weight | 120 Lbs with 40″x31″x22″ dimension with crating. |
| Net Weight | 20 kg |
| Compliance | CE approval |
| Warranty | One year limited warranty with lifetime support |
ADJUSTABLE MICROMETER FILM APPLICATOR WITH DIGITAL DISPLAY-200MM WIDTH
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
This coating machine is used for lithium ion battery cathode /anode electrode coating with dry function, suitable for lithium ion battery lab research.
Additional Information:
Payment Terms : L/C, T/T, Western Union
This equipment is for small coating in the laboratory, can finish the cathode/anode coating and do the first baking.It’s portable and flexible, is the ideal equipment for laboratory.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 20 Days
Double Blade Micrometer Film Applicator With Width of 150 mm
NST-TM-150Double is a double blade wet film applicator with adjsutmentable thickness, which can make film casting more uniform. This is an excellent tool to make higher quality film for tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Specifications
Heating System & Applicator
Built in digital temperature controller with accuracy of +/-1°C2 Heating system :
One 150mm width micrometer adjustable film applicator is included Traverse Pusher is included for pushing the Film Applicator to ensure the constant coating speed
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 30 Days
NST Lab Compact Film Coater Machine with Vacuum Chuck
It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 100 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 100°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.
Heating Cover
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Lab Large Automatic Film Coater with Vacuum Chuck and Adjustable Doctor Blade
NST-TM is a CE Certified Large Automatic Film Coater with vacuum chuck designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has a unique driving system to produce the smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when coating on the thin substrate and making uniform tape casting. One micrometer adjustable applicator is included for immediate use. This machine can be used for research on ceramic tape casting and Li-Ion battery electrode coating.
The biggest advantage of the laboratory small coater is that it can repeatedly and continuously produce a smooth and flawless test sample. It is convenient for the experimenter to accurately coat on different substrates. The error caused by human factors such as coating speed and pressure is reduced and eliminated. 4. Spread the bed for a flat glass.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Technical Specifications
| Model | TMH300-100 | TMH300-150 | TMH300-200 | TMH600-300 | TMH500-310 | TMH550-250 | TMH800-250 |
|---|---|---|---|---|---|---|---|
| Stroke Length | 10 – 300 mm adjustable by using Adjustable Position Switch | 10 – 300 mm adjustable by using Adjustable Position Switch | 10 – 300 mm adjustable by using Adjustable Position Switch | 10 – 600 mm adjustable by using Adjustable Position Switch | 10 – 500 mm adjustable by using Adjustable Position Switch | 10 – 550 mm adjustable by using Adjustable Position Switch | 10 – 800 mm adjustable by using Adjustable Position Switch |
| Platform | Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 410mm(L) x 100mm(W) |
Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 410mm(L) x 150mm(W) |
Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 410mm(L) x 200mm(W) |
Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 700mm(L) x 300mm(W) |
Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 600mm(L) x 310mm(W) |
Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 650mm(L) x 250mm(W) |
Aluminum alloy flat vacuum chuck Vacuum Chuck Dimensions: 900mm(L) x 250mm(W) |
Micrometer Adjustable Film Applicator – 150 mm Width
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Lab Compact Film Coating Machine with 300mm Width Wire Bar
NST-XT-200CA Film coating machine is lab Automatic Film Coater with glass bed as coating plate. It adopts OSP precision wire rod to with a larger range of coating range. This lab coating machine can be used for research on ceramic tape casting. crystal film, special nanometer film and Li-Ion battery electrode coating.
This Wire rod coating machine adopts precision extrusion type coating measuring rods coated film (the thinnest film coating thickness up to 1.5 um). It also can be used for Paper printing, film, adhesive tape production.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Laboratory coating machine is a new laboratory instrument developed in recent years. It is a successful innovation combining electrical control and mechanical organic. In the field of coating production, it can save a lot of raw materials and improve production technology. The key is to greatly improve the reproducibility of coating on the basis of experiments. It is specially designed and manufactured for the research and development and material inspection of battery materials in universities, research institutes and enterprise laboratories.
The equipment is mainly suitable for the coating process of positive and negative electrodes of lithium iron phosphate, lithium cobalt oxide and lithium manganate.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Technical Specifications
| The thickness of the running substrate | aluminum foil 11 ~ 30um; copper foil 8 ~ 30um; |
|---|---|
| The maximum width of coating | 280mm |
| The maximum speed of mechanical transport | 5m / min; Speed accuracy ± 0.1m / min |
| Coating speed | >5m/min |
| Suitable for slurry viscosity | 1500~15000 Cps Suitable for coating single-sided dry thickness 30~200μm |
| Coating accuracy | dry and thick double-sided precision error : <±0.004mm; dry thickness single-sided precision <±0.002mm |
| Coating alignment error on the front and back sides | <±0.5mm Average length error ≤±0.5mm |
| Coating roller accuracy | <±0.001mm, scraper is comma knife |
| Core diameter | 3 inch shaft |
| Oven temperature control accuracy | < ± 3 ° C, drying oven temperature independent PID adjustable |
| Power | 5.5 (KW) |
| Coating method | continuous coating |
| Can move | with 4 universal wheels |
| The weight | 450KG |
AUTOMATIC FILM COATER WITH 8″W X 13″L VACUUM CHUCK & 180MM DOCTOR BLADE
NST-JK-TMJ-220A is a CE Certified Automatic Film Coater with vacuum chuck designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has a unique driving system to produce the smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when coating on the thin substrate and making uniform tape casting. One micrometer adjustable applicator is included for immediate use. This machine can be used for research on ceramic tape casting and Li-Ion battery electrode coating.
Accessories: Film Applicator
Optional 50 upto 180 mm width micrometer film applicator is included, with adjustable thickness from 0.02 mm – 2 mm Traverse Pusher is included for pushing the doctor blade to ensure constant speed coating
Note: Thinnest film can be achieved is > 20 micron
Platform
Additional Information:
Payment Terms : L/C, T/T, Western Union
Battery Micrometer Adjustable Film Applicator – 100 mm
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
Micrometer Adjustable Film Applicator – 50 mm
Adjustable Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment.
The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
THE NST-TMJ-180C DESKTOP CONTINUOUS COATING MACHINE is a small roll to rolling coating machine for lab research, it is assembled by high high precision coating device, suitable for institutions, university and factory pilot scale battery research work.
Additional Information:
Payment Terms : L/C, T/T, Western Union
NST-TB300 is a CE Certified and UL ready automatic battery electrode coating system. It uses transfer coating technique for better coating uniformity and is perfect for research or building prototypes (e.g. pilot scalestudies) of new generation rechargeable batteries. It is integrated with the functions/ features of metallic foil roll unwinding (reeling out), slurry feeder, coating blade, baking oven, and final electrode winding (reeling in)together with touch screen operation for customer’s utmost convenience.
Max. Coating Length
Coating Modes
Additional Information:
Payment Terms : L/C, T/T, Western Union
THE LITHIUM BATTERY COATING MACHINE NST-DYG-135 MODEL COATING MACHINE is mainly used for Slurry drying process of lithium battery electrode coating. The battery coating machine adopts continuous coating mode, is mainly used for lithium battery lab research and pilot scale production line.
The process can be used to replace the original hand-scraping pulp, oven drying operation, and improve the uniformity of the squeegee and drying efficiency, is an indispensable equipment in mass production.
Advantages:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 30 Days
Micrometer Film Applicator with Adjustable Width 0 – 150 mm
This unique wet film applicator features adjustment.for both of thickness and width. The operator sets the blade clearance by adjusting the micrometers, and sets up film width to be coated by adjusting blade width. This is an excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
EQ-SE-KTQ-150D IS A DOUBLE BLADE WET FILM APPLICATOR WITH ADJSUTMENTABLE THICKNESS, which can make film casting more uniform. This is an excellent tool to make higher quality film for tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.
Features
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
NST Adjustable Micrometer Film Applicator with Digital Display-200mm Width
Micrometer Adjustable Film Applicator With Digital Display
Features:
Additional Information:
Payment Terms : L/C, T/T, Western Union
Delivery Time : 7 Days
