N K Enterprises

Jharsuguda, Odisha

The temperature of molten metal in the ladle is around 1650 degrees centigrade (3000 degrees F) and above. When this metal flows from ladle to tundish the temperature drops considerably. Without the use of insulation cover material, there may be breakdown in caster due to loss of temperature.

When Insulating Powder (Radex) – Innsulekx is spread as coating over the molten metal (about 1 inch to 2 inches thick blanket on the hot molten metal) in the ladle and tundish, it acts as a very good insulator and the temperature does not come down quickly in the tundish and ladle.

1. Application of Innsulekx prevents radiation heat losses.
2. Innsulekx is self-spreading and does not form a heap over the molten metal. This leads to better insulation of the metal saving energy.
3. Skull formation is reduced to a large extent making the operations easier in the process of steel making in concast area.
4. Application of Innsulekx prevents re-oxidation of metal.

Ball Innsulekx is used in steel mills for insulation of molten metal in ladle and tundish. Ball Innsulekx has very good insulating properties.

Ball Innsulekx comes in the form of pellets / granules / balls with size from 1 mm 8 mm. The advantage for the use of Ball Innsulekx is dust free working condition.
Use of Ball Innsulekx promotes a better working condition for the team on the melt shop floor. Ball Innsulekx needs less storage space when compared to normal fluxes.

Slagex is mainly used in the Furnace, Transfer Ladles and also in the Tundish to coagulate the slag and reduce Sulphur in one simple application.

Slagex is a low density insulating material with simple and easy application process.

1. Simple and easy application process
2. Fast and Easy removal of slag saving time and money
3. Reduction of metal loss in slag
4. Removal of non-metallic inclusions in the metal
5. Reduction of Sulphur in metal
6. Increase the life of the side wall refractory in transfer ladles
7. Better quality of steel

Slagex Desulphuriser and slag coagulant is a multifunctional powder product which is used in the Furnace and the Transfer Ladles for desulphurisation, slag conditioning, and slag de-oxidation.

It melts, mixes, and reacts with the liquid metal in a rolling motion, reducing Sulphur and other non-metallic inclusions.

It has a very simple and easy application process.

1. It reduces Sulphur and other non-metallic inclusions
2. Product being exothermic, it does not decrease the steel temp.
3. Avoids re-oxidation and nitrogen penetration inmetal from the atmosphere
4. It forms a protective coating on the side walls, increasing the life of ladle refractories
5. Removal of non-metallic inclusions in the metal
6. Reduced pin holes and blow holes in billets
7. Better quality of steel

Slagex Ph3040 Dephosphoriser is a low density material used in the Furnace while charging, to reduce the flow of impurities in the molten metal.

It melts, mixes, and reacts with the liquid metal, reducing phosphorus and other non-metallic inclusions.

It has a very simple and easy application process.

The consumption ranges between 12 kgs to 14 kgs per ton of steel.

1. Reduction of Phosphorous in the metal
2. Fast and Easy removal of slag saving time and money
3. Reduction of metal loss in slag
4. Removal of non-metallic inclusions in the metal
5. Reduces pin holes and blow holes in billets
6. Better quality of steel