Details :

• Enables filtration per-heating, deareation, and precise dosing of media in the vessel within the dissolution bath
• 21 liter media tank capacity allows filling of dissolution vessels for up to 3 dissolution test
• Volumetric dispensing with an accuracy better than 1% as per USP, FDA and Ph. Eur. Requirement.
• Special nozzle design allows the handing of surfactant and frothing media like SLS.
• Programmable deaeration time, temperature and vacuum for effective deaeration of different media.
• Maintains media under vacuum at desired temperature while in idle condition
• Programmable dispensing volume from 200ml to 4 ltrs at a dispending rate of 900ml/min
• Programmable rinse and cleaning cycle allows the instrument to run through a revalidated self cleaning procedure
• On-board memory store 10 batch info of degassed media, user friendly validation and calibration of volumes
• Unparalleled  versatility due to 1 ml volume change increment
• 360 turning radius allows it to be maneuvered in tight places
• Multifunction single hose for dispensing, aspirating, cleaning, rinsing and draining ensures no lifting of heavy tanks

• Print out of validation, calibration, dispensed volume and temperature reports.

My Q Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.

Accessories

• Main unit : 1 No.
• Calibrated Load (SS 316) : 1 No.
• Number of Separator Plates : 21 Nos.

Features of Perspirometer:

• Can also be used for testing color fastness against sea water and water. Made of stainless steel frame.
• Made of stainless steel frame.
• User friendly and corrosion resistant.
• Smooth precision engineered components for excellent performance.

My Q Conditioning chamber maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucialrole in affecting both the physical and chemical properties of materials and the humidity chambercan conveniently replicate such environmental conditions for testing purposes. Conditioning Chamber is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, the manufactures can easily ensure the best quality ofproducts delivered to their clients.

Features -:

• Specially designed to condition samples before & after testing.
• Ambient conditioning condition, temperature 22±2°C & humidity 65± 2 % cam easily attended.
• Latest water shower technology adopted for maintaining humidity.
• Digital temp. Controller & indicator with imported sensor.
• High RPM German fan for circulating air inside the chamber.
• Digital humidity indicator cum controller with imported sensor.
• Digital timer of 999 hours with memory backup

• CFT free compressor for cooling.

Accessories :

• Main Unit : 1 No
• S.S Trey : 2 No
• User Manual : 1 No
• Calibration Certificate : 1 No
• Net Weight Of Unit : 130 Kg
• Related Standards : ASTM D1776-04

MYQ HELMET RIGIDITY TESTING INSTRUMENTS IS USEFUL FOR HELMET TESTING.

the helmet should be placed between two parallel plates by mean of which a known load canbe applied along the transverse axis.

My QISO Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.

Accessories

• Main unit : 1 No.
  
• Calibrated Load (SS 316) : 1 No.
  
• Number of Separator Plates : 21 Nos.

Features of Perspirometer:

• Can also be used for testing color fastness against sea water and water.
• Made of stainless steel frame.
• User friendly and corrosion resistant.
• Smooth precision engineered components for excellent performance.

My Q Conditioning chamber maintains testingsamples at a particular temperature and humiditylevel. The environmental conditions play a crucialrole in affecting both the physical and chemicalproperties of materials and the humidity chambercan conveniently replicate such environmentalconditions for testing purposes. Conditioning Chamber is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, themanufactures can easily ensure the best quality ofproducts delivered to their clients.

Features -:

• Specially designed to condition samples before & after testing.
• Ambient conditioning condition, temperature 22±2°C & humidity 65±3% cam easily attended.
• Latest water shower technology adopted for maintaining humidity.
• Digital temp. Controller & indicator with sensor.
• High RPM German fan for circulating air inside the chamber.
• Digital humidity indicator cum controller with imported sensor.
• Digital timer of 999 hours with memory backup
• CFT free compressor for cooling.

Accessories :

• Main Unit : 1 No
• S.S Trey : 2 No
• User Manual : 1 No
• Calibration Certificate : 1 No
• Net Weight Of Unit : 130 Kg
• Related Standards : Astm D1776-04

Details :

• Enables filtration per-heating, deareation, and precise dosing of media in the vessel within the dissolution bath
• 21 liter media tank capacity allows filling of dissolution vessels for up to 3 dissolution test
• Volumetric dispensing with an accuracy better than 1% as per USP, FDA and Ph. Eur. Requirement.
• Special nozzle design allows the handing of surfactant and frothing media like SLS.
• Programmable deaeration time, temperature and vacuum for effective deaeration of different media.
• Maintains media under vacuum at desired temperature while in idle condition
• Programmable dispensing volume from 200ml to 4 ltrs at a dispending rate of 900ml/min
• Programmable rinse and cleaning cycle allows the instrument to run through a revalidated self cleaning procedure
• On-board memory store 10 batch info of degassed media, user friendly validation and calibration of volumes
• Unparalleled  versatility due to 1 ml volume change increment
• 360 turning radius allows it to be maneuvered in tight places
• Multifunction single hose for dispensing, aspirating, cleaning, rinsing and draining ensures no lifting of heavy tanks

• Print out of validation, calibration, dispensed volume and temperature reports.

My Q Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.

Accessories

• Main unit : 1 No.
• Calibrated Load (SS 316) : 1 No.
• Number of Separator Plates : 21 Nos.

Features of Perspirometer:

• Can also be used for testing color fastness against sea water and water. Made of stainless steel frame.
• Made of stainless steel frame.
• User friendly and corrosion resistant.
• Smooth precision engineered components for excellent performance.

My Q Conditioning chamber maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucialrole in affecting both the physical and chemical properties of materials and the humidity chambercan conveniently replicate such environmental conditions for testing purposes. Conditioning Chamber is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, the manufactures can easily ensure the best quality ofproducts delivered to their clients.

Features -:

• Specially designed to condition samples before & after testing.
• Ambient conditioning condition, temperature 22±2°C & humidity 65± 2 % cam easily attended.
• Latest water shower technology adopted for maintaining humidity.
• Digital temp. Controller & indicator with imported sensor.
• High RPM German fan for circulating air inside the chamber.
• Digital humidity indicator cum controller with imported sensor.
• Digital timer of 999 hours with memory backup

• CFT free compressor for cooling.

Accessories :

• Main Unit : 1 No
• S.S Trey : 2 No
• User Manual : 1 No
• Calibration Certificate : 1 No
• Net Weight Of Unit : 130 Kg
• Related Standards : ASTM D1776-04

MYQ HELMET RIGIDITY TESTING INSTRUMENTS IS USEFUL FOR HELMET TESTING.

the helmet should be placed between two parallel plates by mean of which a known load canbe applied along the transverse axis.

My QISO Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.

Accessories

• Main unit : 1 No.
  
• Calibrated Load (SS 316) : 1 No.
  
• Number of Separator Plates : 21 Nos.

Features of Perspirometer:

• Can also be used for testing color fastness against sea water and water.
• Made of stainless steel frame.
• User friendly and corrosion resistant.
• Smooth precision engineered components for excellent performance.

My Q Conditioning chamber maintains testingsamples at a particular temperature and humiditylevel. The environmental conditions play a crucialrole in affecting both the physical and chemicalproperties of materials and the humidity chambercan conveniently replicate such environmentalconditions for testing purposes. Conditioning Chamber is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, themanufactures can easily ensure the best quality ofproducts delivered to their clients.

Features -:

• Specially designed to condition samples before & after testing.
• Ambient conditioning condition, temperature 22±2°C & humidity 65±3% cam easily attended.
• Latest water shower technology adopted for maintaining humidity.
• Digital temp. Controller & indicator with sensor.
• High RPM German fan for circulating air inside the chamber.
• Digital humidity indicator cum controller with imported sensor.
• Digital timer of 999 hours with memory backup
• CFT free compressor for cooling.

Accessories :

• Main Unit : 1 No
• S.S Trey : 2 No
• User Manual : 1 No
• Calibration Certificate : 1 No
• Net Weight Of Unit : 130 Kg
• Related Standards : Astm D1776-04