Details :

• The new generation of microprocessor based tabletop centrifuges models use brushless induction motor with frequency drive enabling the user to pre-set speed & time with a high degree of accuracy. Display of set parameters like speed, time etc. make the unit an ideal choice for repetitive sample analysis.
• Brushless induction motor with frequency drive.
• Stable speed outut even under unstable voltage conditions
• LCD/ LED display of speed and time brake
• Digital countdown timer
• Safety lid interlock to prevent lid opening during centrifugation
• Dynamic brake for quick deceleration
• Imbalance & inverter fault detection with auto shutdown
• Alphanumeric LCD display of speed & RCF (R-8M)
• Selection of 3 acceleration & deceleration profiles (R-8M)
• Recall of last set parameters. (useful for repetitive analysis)
• Automatic door opening through gas hinge
• Imbalance detector with lid lock

• Speed control upto 6000 RPM

Details :

• Specially designed to meet the requirement for incubation of bacteria to decompose organics matter in waster water. It is used for biology, botany, Virology and Oceanoloraphy. Water pollution, sewage, agriculture, food and research departments also use it. In addition to this, it helps in preservation of vaccines. It provides a wide range of conditions for study of synthesizing organisms under tropical or temperature and summer or winter conditions. Temperature is controlled with an electronic digital temperature controller cum indicator with an accuracy of 0.5C or better.

• Switch and set the desired temperature (between 5 C to 50 C) with the help of digital temperature controller cum indicator. This controller has a dual display i.e. both the set temperature is displayed at the same time. The indicator has a controlling accuracy of 0.5 C or better.

My Q HOT AIR OVEN Determination of effect of ageing on various physical properties of different materials may be carried out, by heating the material under test , inside the oven as temperature required so that the effects of long –term ageing are reproduced within a much shorter duration of time.

My Q Hot Air Oven is double walled constructed, its outer body made up of mild steel duly powder coated & inner chamber made up of stainless steel. The control panel is on the top having digital temp. Controller cum indicator. Miniature circuit breaker is provided on the top panel of safety. Thermostat is provided to control the inflow of current to heaters for uniform heating circulating fan is fitted in the chamber for uniformity of temperature inside the chamber, stainless steel shelves are provided for the sample.

Determination of effect of ageing on various physical properties of different material may be carried out by heating the material under test , inside the incubator as temperature required so that the effect of long term ageing are reproduce with in a much shorter duration of time.

My Q Incubator is double walled constructed incubator with outer body made up of mild steel duly powder coated and inner chamber made up of stainless steel.

Control panel is on the top having digital temp./humidity controller cum indicator miniature circuit breaker is on the top panel for safety .

Thermostat is provided to control the inflow of current to heater for uniform heating insulated glass window is provided to view the samples without opening the doors. Circulating fan is fitted in the chamber for uniformity of temperature inside the chamber.

Stainless steel shelves are provided for sample holding.

My Q HUMIDITY CHAMBER maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucialrole in affecting both the physical and chemical properties of materials and the humidity chambercan conveniently replicate such environmental conditions for testing purposes. HUMIDITY CHAMBER is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, the manufactures can easily ensure the best quality ofproducts delivered to their clients.

Features -:

• Specially designed to condition samples before & after testing.
• Ambient conditioning condition, temperature 22±2°C & humidity 65± 2 % cam easily attended.
• Latest water shower technology adopted for maintaining humidity.
• Digital temp. Controller & indicator with imported sensor.
• High RPM German fan for circulating air inside the chamber.
• Digital humidity indicator cum controller with imported sensor.
• Digital timer of 999 hours with memory backup
• CFT free compressor for cooling.

Accessories :

• Main Unit :  1 No
• S.S Trey :   2 No
• User Manual :   1 No
• Calibration Certificate : 1 No
• Net Weight Of Unit  : 130 Kg
• Related Standards : Astm D1776-04

Details :

• The new generation of microprocessor based tabletop centrifuges models use brushless induction motor with frequency drive enabling the user to pre-set speed & time with a high degree of accuracy. Display of set parameters like speed, time etc. make the unit an ideal choice for repetitive sample analysis.
• Brushless induction motor with frequency drive.
• Stable speed outut even under unstable voltage conditions
• LCD/ LED display of speed and time brake
• Digital countdown timer
• Safety lid interlock to prevent lid opening during centrifugation
• Dynamic brake for quick deceleration
• Imbalance & inverter fault detection with auto shutdown
• Alphanumeric LCD display of speed & RCF (R-8M)
• Selection of 3 acceleration & deceleration profiles (R-8M)
• Recall of last set parameters. (useful for repetitive analysis)
• Automatic door opening through gas hinge
• Imbalance detector with lid lock

• Speed control upto 6000 RPM

Details :

• Specially designed to meet the requirement for incubation of bacteria to decompose organics matter in waster water. It is used for biology, botany, Virology and Oceanoloraphy. Water pollution, sewage, agriculture, food and research departments also use it. In addition to this, it helps in preservation of vaccines. It provides a wide range of conditions for study of synthesizing organisms under tropical or temperature and summer or winter conditions. Temperature is controlled with an electronic digital temperature controller cum indicator with an accuracy of 0.5C or better.

• Switch and set the desired temperature (between 5 C to 50 C) with the help of digital temperature controller cum indicator. This controller has a dual display i.e. both the set temperature is displayed at the same time. The indicator has a controlling accuracy of 0.5 C or better.

My Q HOT AIR OVEN Determination of effect of ageing on various physical properties of different materials may be carried out, by heating the material under test , inside the oven as temperature required so that the effects of long –term ageing are reproduced within a much shorter duration of time.

My Q Hot Air Oven is double walled constructed, its outer body made up of mild steel duly powder coated & inner chamber made up of stainless steel. The control panel is on the top having digital temp. Controller cum indicator. Miniature circuit breaker is provided on the top panel of safety. Thermostat is provided to control the inflow of current to heaters for uniform heating circulating fan is fitted in the chamber for uniformity of temperature inside the chamber, stainless steel shelves are provided for the sample.

Determination of effect of ageing on various physical properties of different material may be carried out by heating the material under test , inside the incubator as temperature required so that the effect of long term ageing are reproduce with in a much shorter duration of time.

My Q Incubator is double walled constructed incubator with outer body made up of mild steel duly powder coated and inner chamber made up of stainless steel.

Control panel is on the top having digital temp./humidity controller cum indicator miniature circuit breaker is on the top panel for safety .

Thermostat is provided to control the inflow of current to heater for uniform heating insulated glass window is provided to view the samples without opening the doors. Circulating fan is fitted in the chamber for uniformity of temperature inside the chamber.

Stainless steel shelves are provided for sample holding.

My Q HUMIDITY CHAMBER maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucialrole in affecting both the physical and chemical properties of materials and the humidity chambercan conveniently replicate such environmental conditions for testing purposes. HUMIDITY CHAMBER is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, the manufactures can easily ensure the best quality ofproducts delivered to their clients.

Features -:

• Specially designed to condition samples before & after testing.
• Ambient conditioning condition, temperature 22±2°C & humidity 65± 2 % cam easily attended.
• Latest water shower technology adopted for maintaining humidity.
• Digital temp. Controller & indicator with imported sensor.
• High RPM German fan for circulating air inside the chamber.
• Digital humidity indicator cum controller with imported sensor.
• Digital timer of 999 hours with memory backup
• CFT free compressor for cooling.

Accessories :

• Main Unit :  1 No
• S.S Trey :   2 No
• User Manual :   1 No
• Calibration Certificate : 1 No
• Net Weight Of Unit  : 130 Kg
• Related Standards : Astm D1776-04