Dust Samplers in Mumbai

• PM 2.5 Size Separator : U.S. EPA designed PM25 Wins Impactor
• Air sampling Filtration Media : Suitable for 47mm filter in special Delrin Filter cassette carrier housed in filter holder assembly
• Vacuum Pump : A diaphragm type pump with AC motor for reliable & low noise operation
• Power Requirement : 230 V AC 10% ± 50 Hz
• PM 10 Size Separator : U.S. EPA Omni-directional ambient particle inlet with 10µ separation assembly sample transport tube
• Brand Name : IPM-FDS 2.5/10 Micron
• Leak Test : Internal & External Leak check feature for accurate sampling
• Dimension & Weight : Sampler Size (16X13X24)". Total height with Inlet and Stand (5.5)'. Approx 25 Kgs
• Volume Totaliser : Totalized volume readings available on Dry Gas Meter
• Flow Control : Flow control by critical orifice at 1m3/hr unaffected by voltage fluctuation

Instrumex Ambient Fine Dust Sampler is designed as per USEPA guidelines for sampling of PM2.5 and PM1 0 particles in Ambient Air. The USEPA based WINS impactor separates the particles smaller than 2.5p by the principle of impaction at a regulated flow of 1 m3/hr. A critical orifice controls the flow throughou more...

• Leak Test : Internal & External Leak check feature for accurate sampling.
• Model : IPM-FDS 2510
• Dust Instruments Measurement : Pm2.5 & Pm10
• Feature : Durable, Fine Finished
• Bar Press Sensor : Range 600 to 800 mm Hg. Resolution, 1 mm Hg
• PM 2.5 Size Separator : Separate set of inlet assembly with EPA PM 2.5 WINS Impactor

When it comes to innovation in Ambient Air Sampling technology, Instrumex has delivered yet again! The most common hassle faced by Consultants in order to comply with the CPCB norms for Ambient Air Sampling - was using two separate instruments for measurement of PM2.5 & PM10 Dust. Instrumex has found the more...

Instrumex Respirable Dust Sampler is a versatile dust sampler that is based on a design standardized by CPCB for collection of PM10 & Totoal Suspended Particulates (TSPM) in ambient air and also simultaneously samples the particulates having aerodynamic diameter less than 10 Micron.   Features Simult more...

• Weight : 25 Kg.
• Product Dimension : 400 x 420 x 550 mm
• Frequency : 50 Hz
• Power Source : Electronic
• Voltage : 220 Volt AC
• Usage Application : Lab / Industries

more...

• Battery Type : Li-Ion rechargeable
• Operation Time : 24 Hrs.
• Model Name/Number : THERMO TEI 421
• Automation Grade : Manual
• Weight : 1 KG.
• Material : ALUMINIUM
• Brand : THERMO

more...

• Features : VOC / BENZENE
• Material : ALUMINIUM
• Brand : THERMO
• Model Name/Number : TEI 381
• Capacity : 0.1 - 05 LPM
• Shape : Rectangular
• Usage/Application : VOC / BENZINE

more...

• MOQ : 1 Set(s)
• Supply Type : Manufacturer
• Digital Display : 16 character, 2 line LED display with 5 key operation
• Display : Digital
• Night View : Provision has been made for light in the sampler for taking reading during dark area and in night hours
• Dimension : Approximately 410mm X 300mm X 700mm
• Brand Name : VAIBHAV
• Clock / Timer : Programmable Real Time control system with control of automatic start & stop, number of required intervals can be programmed, Timer is used to start and shut off the sampler at preset time
• Weight : 50 kg
• Filter Holder : To accommodate any standard filter paper of 25 x 20 cm, particulate bigger than 10 micron collected in separate dust cap under the cyclone

SPECIAL FEATURES  Digital Manometer with volume totalizing (Waterless manometer, no need of filling and adjusting zero lever with distilled water)  Provide Sample volume in m3 at any stage of sampling on display  Modular design for easy operation  Sturdy aluminum construction with SS hardware  more...

• Suction Blower.. : Multi bladed impeller revolves at a very high speed in a specially designed stator cum compression chamber ensuring very fine clearance between them
• Warranty : 14 MONTHS
• Filter Media : 8inch X 10inch (203mm X 254mm / 20.3cm X 25.4 cm) Glass microfiber filter for common use and EPM 2000 or equivalent for special monitoring / research work
• Suction Blower... : The impeller is fitted directly onto a bearing mounted shaft of a superior quality flanged electric motor. 100 % oil free required zero lubrication
• Voltage : 220V
• Supply Type : Manufacturer
• Particle Size : Separate provision for collection of Respirable and non Respirable (less than and greater than 10 micron) size particles
• Particulate Sampling : 10 micron down to 0.1 micron (depending upon type of filter used). A cyclone is used for fractionating the dust into two fractions, D-50 cutoff for the cyclone is at 10 microns.
• Auto Zero of Volume : By pressing single key volume will be auto zero
• Weight : 30-40kg

special features  confirm to bis 5182 (part 23) : 2006 standard  sampling flow rate will maintain automatic at pre set level even during filter chocking, ampere  & voltage variation with electronic feedback controller  digital manometer with volume totalizing (waterless manometer, no need of filling more...

• MOQ : 1 Set(s)
• DATA DOWNLOADING : Transfer file will be easily open in MS excel. Logger can store upto 4 GB Data in its own memory in non volatile form.
• STANDARD ACCESSORIES : Adopter for Leak check & flow rate calibration
• Type : DICHOTOMOUS SAMPLER
• ELAPSED TIME INDICATOR : Real time clock based record the operation time for each sample in hours and minute
• Power Source : Electricity
• Supply Type : Manufacturer
• PM 2.5 & PM 10 SIZE SEPARATOR : PM10 Impactor confirm to USEPA design and its reference method, sample collected in separate 37mm dia pure nylon membrane filter having 1mm thickness
• ACCURACY : 5 % accuracy at 1.0m3/hrs will maintain through microprocessor base event controller data logger it will monitor and control flow through pneumatic constant flow controller.
• HOUSING / CABINET : Frame mount main panel provided with lockable powder coated aluminum cabinet to resist against all weather and worst environment conditions

SPECIAL FEATURES PM10 & PM25 impactor as per design standardize by USEPA Virtual impactor based collection of coarse and fine fraction on separate filter enable simultaneous monitoring of PM10 & PM2.5 Auto shut off of sampler if pressure drop exceeds safe limit so that filter integrity is maintained C more...