Calibrators in Mumbai

• Protection : Fuse: 100mA / 250V
• Over Pressure Alarm : 20% of Full Scale
• Battery Backup : 20 Hours
• Auto Power Off : 15 Minutes
• Backlight : LED Backlight
• Usage : Industrial
• Pressure Connection : 1/4
• Display : Alpha Numeric Display

Features : MEASUREMENTS: Electrical measurements of mA & Volts. Peak pressure measurements (High & Low peak) PRESSURE SWITCH TEST FACILITY: Opening and closing pressures are easily identified by display hold while opening and closing contact DISPLAY: Large backlit alpha numeric display with 2 lines (o more...

• Display Stability : ±0.2°C
• Block Depth : 120 mm
• Display : Graphical with LED Backlight
• Driven Type : Electric
• Transmitter Supply : 24V DC ± 10% (Loop Powered)
• Block Diameter : 25.4 mm
• Resolution : 0.1°C
• Power Supply : 230V AC ± 5% / 50Hz

Features : Dry Block Graphical Display Microcontroller Based Feather Touch Key Pad Fast Heating & Cooling Reads Set temperature and device input simultaneously Good Stability Loop Power Supply for Transmitters  Facility to check Temperature Switch Test Measurement Facility for RTD, Thermocouple, mV, V, mA, O more...

• MOQ : 100 Pieces
• Features : Good quality, Easy maintenance
• Colour : Grey
• Material : Mild Steel
• Power Source : Electric
• Supply Type : Manufacturer
• Frequency : 50-60 Hz

Basics Calibration Blocks for sensitivity calibration for weld testing, available in CS & SS with dimensional accuracy   more...

• Color : Steel finish
• Type : ASME
• Material : CS,SS
• Brand Name : KVIC
• Supply Type : Manufacturer
• Place of Origin : India

To offer complete satisfaction to the clients, we ensure that we deliver only faultless range of products and thus we store the entire lot in our secured and capacious warehousing unit. From cash payment to bank transfer, we are comfortable with any of these payment options. As per your convenience, you can m more...

• Country of Origin : India
• Color : Steel finish
• Material : CS,SS
• Application : Sensitivity Calibration & Weld Testing
• Supply Type : Manufacturer
• Type : ASME

Basics Calibration Blocks for sensitivity calibration for weld testing, available in CS & SS with dimensional accuracy more...

• Model : GA607
• Temperature Range : -10°C To 50ºC
• Nominal Sound Pressure level : At 101.3kPa (760mm Hg), 23º & 50%RH.
• Batteries : 2 x3V CR2032 (Coin Cell).
• Harmonic Distortion : < 3%
• Tolerance : ± 0.3dB
• Life : Approx. 70 Hours.
• Dimensions : Length: 140mm, Diameter: 51mm, Weight: 230gms.

The GA607 meets the demanding standards of a class 1 calibrator. It features two calibration levels, 94dB and 104dB re 20μPa both at 1kHz. It is for use with 1/2" microphones. Using the GA607, a sound level meter can be checked at two meter scale points and usually on two ranges. Supplied with GA690 barome more...

• Storage Temperature : 00 to 500 C (32o to 122oF).
• Expected Battery Life : Over 300 Charge/recharge Cycles;
• Battery Charge Time : 14 Hrs.;
• Transmission Link : RS-232; Interface Connectors:
• DC Power Source : Internal Battery Pack;
• Operating Temperature : 50 to 350 C (41o to 95oF);
• AC Power Source : Continuous operation through adapter
• Charger : Jack (2.1mm barrel jack), Printer Jack (DB-25), Sensor Jack - Wet Cell (DB-9)

The Gilian Gilibrator 2 Calibration System is an easy to use Primary Standard for the calibration of air sampling equipment. The system includes a high accuracy, electronic flow meter that provides instantaneous air flow readings and cumulative averaging of multiple samples. Three Wet Cell Assemblies provide more...

• Weight : 2.2 LBS
• Warm Up Time : 1 Minute
• Battery : Including 6-AA Size Alkaline Batteries
• DC Power Input : 7.5 VDC ±1.5 V, 300 mA max
• Range : 0.01 to 20 LPM
• Dimensions : 5 in. × 2 in. × 1.25 inch
• Accuracy : ±2% or 0.005 std. LPM, whichever is greater

The Go-Cal™ air flow calibrator is a portable, battery-operated calibrator that is lightweight, easy to use, and accurate within 2% of reading. Go-Cal™ displays volumetric flow rate continuously allowing adjustments to pump flow-rate in real-time. The Go-Cal™ displayed flow rate is compensat more...

• Feature : Durable, Heat Resistance, High Performance
• Display Type : Digital
• Temperature Range : 0-100°C, 100-200°C, 200-400°C
• Current Type : AC, DC
• Driven Type : Electric
• Power : 0-6VDC, 12-18VDC
• Frequency : 50Hz, 60Hz

The Energy Meter Calibration Test Set (PCS ME 1.0) is a power calibration system with PCS ME 1.0 and EnergoEtalon™ software. The reference setup of the Energy Meter Calibration Test Set (PCS ME 1.0) provides high accuracy of measurements within an extended frequency range of 16-2500 Hz. The Energy Meter more...

• Rated Power : 100 W, 200 W
• Driven Type : Electric
• Material : Stainless Steel
• Phase : Single Phase
• Usage : Industrial
• Type : Energy Meter Testing

The Energy Meter Calibration Test Set (MTS ME 3.3) is meant for on-site and in-lab testing of the electric power meters in automated settings. The Energy Meter Calibration Test Set (MTS ME 3.3) includes a reference standard meter, waveform generator, pulse sensors, and requisite software, with an accuracy cla more...

• Rated Power : 100 W, 200 W
• Type : Energy Meter Testing
• Phase : Single Phase
• Material : Stainless Steel
• Usage : Industrial
• Driven Type : Electric

The rack-mounted Energy Meter Calibration Test Set (MTS ME 3.1KM) is a three-phase fully automated system. The Energy Meter Calibration Test Set (MTS ME 3.1KM) is designed for testing measurement instruments. As an Exporter and Supplier of Energy Meter Calibration Test Set (MTS ME 3.1KM), we offer a range tha more...

• Max Temperature (° F) : 932
• Height (in) : 4 1/4
• Min Temperature (° F) : 122
• Height (cm) : 11.4
• Width (in) : 7 3/32
• Power (Hz) : 50/60
• Temperature Resolution (° F) : 0.1
• Depth (cm) : 23.3
• Depth (in) : 9 3/16
• Temperature Accuracy : ±1.0⁰F at 212⁰F (±0.5⁰C at 100⁰C); ±3.6⁰F at 932⁰F (±1.8⁰C at 500⁰C)

more...

• Width (in) : 3 13/64
• Features : Ergonomic palm-sized double-molded housing, Large, dot-matrix digital backlit LCD.
• Length (in) : 6 19/64
• Height (in) : 1 45/64
• Batteries : 6 x AA alkaline or NiMH batteries
• Length (cm) : 15.9
• Height (cm) : 4.4
• Width (cm) : 8
• Temperature Accuracy : 0.05% rdg ±1° basic accuracy

more...

• Length (in) : 4
• Power (VAC) : 110 to 240
• Display Type : 4-digit LCD
• Height (in) : 4 1/4
• Batteries : 1 x 9V battery
• Width (in) : 2
• Current & Voltage Calibrator : 110 to 240 VAC

more...

• Applications : Clean Room ControlFilter Performance Monitoring,Draft Measurement,Airflow Measurement Control etc.

Series MC Portable Multi-Cal Pressure Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility. Calibrator can accommodate up to two interchangeable more...

Model SMC-1 Sound Calibrator is ideal for setting standard noise levels at 94 dB and 114 dB. The SMC-1 has an output frequency of 1 kHz, ±4%. This unit functions best when environment conditions have a temperature of 68°F (20°C), relative humidity of 65%, and an atmospheric pressure of 29.9" Hg (1013 mbar) more...

• DISPLAY : 5 Digit LCD Display.
• MAX. ALLOWABLE VOLTAGE : 30 V
• OPERATION TEMPERATURE RANGE : 0-50°C
• Power : 9V

The new Kusam-Meco Temperature Calibrator is an ideal calibrator for calibrating Thermocouples, Temperature Indicators, Temperature Transmitters & SCADA Systems. It has a large 5 digit LCD display with high resolution & accuracy. more...

• maximum accuracy : can reach 0.01%
• Features : high accuracy and stability, which can provide powerful measurement or output functions & other special functions to meet all the calibration work for field process control.
• displayed : 5 digits.

more...

• • Altitude Effects : Approx. 0.1 dB decrease for each 2000 feet increase in altitude from sea level to 12,000 feet elevation, or comparable atmospheric pressure change.(approx. every 50 mm of Hg decrease).
• - Storage Temperature range : -40 ~ +65 C (with batteries removed).
• • Weight : Approx. 250g.
• - Operating Temperature range : -10 ~ +50 C
• - Temperature Coefficient : 0 ~ 0.01 dB / C
• • Battery : Single 9V transistor Battery. (NEDA 1604)
• • Battery Life : Approx 100 hours.
• • Accuracy : ±0.3dB (20°C, 760 mm Hg)
• • Standard : Confirms to IEC 942 Class 1.
• • Dimension : 48 x 48 x 138mm

Standard Sound rigging values are 94dB and 114dB.12” microphone adapters provided.With low battery indictor. more...

• Temperature : -23° to 650°C (-9° to 1202°F)

The ITC series employs the slim and rugged design of the CTC series.Intuitive user interface, the clear LCD display, and the functionality that is used in the successful CTC series. more...

• voltages : 1 mV

The Fluke 709 mA loop calibrator is designed to save time and produce high-quality results. This tool reduces the time it takes to measure, or source, voltage or current and poewr up a loop.Small rugged design operates on (6) standard AAA batteries, Built-in selectable 250 Ω resistor for HART communication, more...

the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split dis more...

• MOQ : 1 Piece(s)
• Type : Magnetic Equipment
• Application : Magnet Calibration/Charging
• Brand Name : Polytronic
• Condition : New
• Color : Black

We are the main supplier of this product. more...

• Supply Type : Manufacturer

Powerful productivity in your hands, the modular DPI 620 Genii delivers a range of calibration tasks, in one compact hand-held system. Unique among calibrators, the DPI 620 Genii is driven by a touch and swipe interface, making it faster and simpler to access every function in this world-class multifunction c more...

• Supply Type : Manufacturer

The UPS III Loop Calibrator is a rugged and extremely compact loop calibrator. Measuring 3 in x 5 in (77 mm x 129 mm) and weighing just 9.7 oz (275 g), it fits comfortably in a shirt pocket. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy to read display and sim more...

Portable precision thermometers. Dry-block and liquid bath temperature calibrators: 5 series, with more than 25 models and temperature ranges from -90° to 1205°C / -130° to 2200°F. All featuring portability, accuracy and speed.   Highly portable and fast precision thermometers Wide range of dry-block and more...

Convenient electronic systems ranging from -1 to 1, 000 bar (25 inHg to 14, 500 psi) - wide choice of pressure ranges, pumps and accuracies, fully temperature-compensated for problem-free and accurate field use. convenient electronic systems ranging from -1 to 1, 000 bar (25 inHg to 14, 500 psi) wide choice o more...

Process signal measurement and simulation for easy control loop calibration and measurement tasks - from handheld field instruments to laboratory reference level bench top instruments.   Process signal measurement and simulation Easy control loop calibration and measurement task Handheld field instruments La more...

The Ultima Calibrator offers the industry's simplest, quickest calibration. Simple, three-button device is purpose-built for calibrating and changing the address of Ultima and Ultima X Gas Monitors and the Toxgard II Gas Monitor.   IR technology communicates with supported gas monitors User can calibrate and more...

Simple, accurate calibration is easy with these economical, all-in-one kits. Choose from 14 different types for sensor and instrument calibration. Kits include zero and span cylinders, regulators, tubing, accessories and instructions. All kits housed in a lightweight carrying case, making it convenient to car more...

Radix calibrators offer several functions. Operating in measuresource mode, these instruments can handle rtd, ma, mv, thermocouple (tc) and ohms signals amongst others. They can also simulate a 4-20 ma and 24 v loop supply to calibrate other instruments. Microcal is lightweight and cost-efficient and radical more...

The Main purpose of this panel is to Test Instrument like single phase three phase motor,  thyristors transformers, various parameters like current, voltage, resistances etc.Acting as a 24 Vdc power supply, DOL(direct online starter) starter, star delta starter,   Radical calibrator,  multimeter, variac, 1 more...