Our Products
Perforated Sheet
1 Products availableSteel Sheets
1 Products availableBeams And Girders
1 Products availableIndustrial Blowers, Coolers & Fans
1 Products availableRoof Fittings
1 Products availablePrefabricated Hut
1 Products availableWall Decor
1 Products availableLeading Manufacturer, Supplier & Retailer of Polycarbonate Sheet, Burly Deck and Steel Cee.
44/130 mm Decks are manufactured from test quality of CR Coils as per IS:513 apart from these material, 44/130mm sections can be rolled frorn galvanized sheets, Pre-colour coated and bare galvalume sheets. 44/130mm Sections are manufactured in thickness of 0.5mm, 0.6mm, 0.63mm, 0.8mm, 1.00mm, 1.25mm, 1.6mm. 2.00mm and are available in any standard lengths as per customers requirement subject to transport restrictions (upto maximum of 12mtrs length)
Material: Steel Deck is produced from galvanized and colour coated products as per IS : 513, IS : 277, IS:14246 and AS:1397-G300-AZ-275.
Perforated sheets can be used to benefit in many situations, e.g noise and weight reduction, air control, filtration, as a decorative finish or simply for anti-skid flooring. The varied qualities offered by perforated sheets make them ideal for sorting, facades, ceilings, lamps, shelves, shielding, stairs and many other applications, far too many to mention!.
AVAILABILITY OF TOOLING
We have Number of different patterns available and ready for production. However, if we do not have tooling for the exact pattern you require, our modern and well equipped tooling department is able to produce cost effective tooling, enabling us to supply perforated products exactly to your request.
You can also refer to our large program of perforated sheets held in stock or be inspired by our pattern catalogue.
As the world's largest manufacturer and supplier of perforated products we are the only partner you need!
PRODUCT SPECIFICATION
MATERIAL | : | MILD STEEL (MS), G.P., STAINLESS STEEL, ALUMINIUM |
THICKNESS | : | 0.4MM 2 MM |
WIDTH | : | 900 MM 1250 MM |
HOLE DIAMETER | : | 3 MM to 6 MM |
LENGTH | : | AS PER REQUIRE SIZE |
Pre-painted Galvanized Steel Sheets (Gl- Base) Hot dipped galvanized pre-painted steel sheet Zinc Alum Steel Sheet (Galvalume) Non- colour (55 % Aluminium 43% Zinc 1.6% Silicon) Alu Zinc coating : AZ 150 (Option AZ100)
Economical Roof Profile with Excellent design flexibility.
2.250 mm pitch for easy water shredding.
3.Available in 0.47, 0.50, 0.55, 0.60mm thickness.
4.Cover width Rib in 1010 mm available upto 13 m in length.
5.Special side lap corrugation gives extra support at panel ovelap.
Base Steel | Metallic Coating | Color Coating | Weight ( kg/m2) | |
Strength (Mpa) |
Thickness (TCT) mm |
Rib Profile 30mm Rib, 1020mm cover width |
||
G550 High Tensile |
0.47 0.50 0.55 0.60 |
Zinc Aluminium Alloy Coated AS 1397 |
Bare - Al Zn Polyester Super |
4.16 4.43 4.87 5.33 |
G300 / 240 | 0.50 0.55 0.60 |
Galvanised IS 277 |
Polyester PVDF |
4.51 4.96 5.46 |
Polycarbonate Sheet are transparent roof glazing sheets available in required Matching Profiles, made out of finest Polycarbonate sheet from Sabic Innovative Plastics. .
Thickness Available 2MM, 3MM, 4MM
CEE PURLINare structural members designed and produced using the advanced technology, quality and customer oriented services, for use as secondary supports for economical roof sheeting and wall cladding systems in any type of building with following added advantages :-
Why Ventilate?
Effective ventilation is an irnportant aspect of a productive force, fresh air makes people feel more alive and vital, whilst stale hot air causes people to feel lethargic and disinterested. The movement of air over the body causes evaporation to occur which is the natural way of cooling down, thus preventing moderate heat stress. The multi-Vent provides this rnuch needed movement of air
Benefit ?