Our Products
Packaging Seals And Caps
2 Products availableFilling Machines
2 Products availablePharmaceutical Machines & Equipment
2 Products availableLabels, Tags, Barcode & Vinyl Stickers
1 Products availableLabels
1 Products availableTassels
1 Products availableOur Complete range of products are Induction Seal Liner & Wad, Transparent Labels Rolls, Sleeve Applicator Machine, Wad Inseter Machine and Pressure Sensitive Seal Liner.
The Automatic Vial Powder Filling Machine has been especially designed to provide assistance in filling injectable powder into vials. The steel frame has been manufactured with the usage of stainless steel sheets which ensure easy accessibility to the doors while cleaning the same. Exceptional amount of accuracy has been kept in accord to ensure that the highest quality machinery is delivered to the customers. This Automatic Vial Filling Machine has been supplied with stainless steel to increase the lifespan of the machine as a whole. Parts that are directly exposed to air are specifically made of stainless steel for this very reason.
The Dry Syrup Powder Filling Machine is used largely for the purpose of filling large volume of powder into appropriate containers. These type of machines are majorly used in industries such as pharmaceutical, veterinary, herbal products, cosmetic and food. The machine has been especially designed in such a manner that the operational effectiveness and efficiency of the whole process is not hampered in any manner. Certain important aspects include the presence of the magnetic clutch, dry syrup powder filling lines and the bottle sensors that further strengthen the working of the entire process in a factory.
The High Speed Dry Syrup Powder Filling Machine was manufactured primarily to help in the filling up of bottles with the right type of powder. The machine is used to minimize the effort of filling bottles manually and reducing the number of mistakes that might be caused otherwise. The bottles are filled with the usage of in-feed turn table. Guide supply bottles are used to put bottles on the conveyor belts at the specific speed rate so that the filling of the bottles is accurately completed. The filling head is also present on the top of the machine plate in the same line. Bottle sensors are used to identify the bottle and fill it in with the right quantity of powder as mentioned. The bottle then goes to the sealing shaft on the conveyor belt.
The Auger Powder Filling Machine has proven to be the best solution if you are looking for a machine that helps in filling a large number of bottles, jars or similar type of containers. This high speed auger powder filling machine has the capability to provide an output relative to 40 containers per minute. These machines are ideal for industries such as food, biotech, veterinary and pharmaceutical etc where bottles have to be filled in on a regular basis. It is also used by companies supplying beverages.
The Powder Filling Machine has been built majorly on stainless steel legs with sturdy welded frame. The unit of the machine that is responsible for filling bottles is kept on pillars which are majorly supported by top plates. These also have height adjustment features that help in controlling the height at which we are comfortable in working.
The Automatic Vial Filling Machine has been introduced for the sole purpose of providing assistance in the filling of injectable glass vials. The Conveyor belt has been manufactured using Stainless Steel Stat. Furthermore, the basic parts of this fully automatic aseptic liquid filling machines consist of conveyor belts, filling, pre gassing and post gassing aspects. Apart from this, it also has 316L syringes made of Stainless Steel. The machine also has non toxic rubber tubing that is synthetic in nature. The easily reachable compact panel is another major advantage of the machine.
Model | ALVF - 60 | ALVF - 120 |
---|---|---|
Number of Heads | Two | Four |
Product Rate | 30 to 60 Vials/ Minute | 60 to 120 Vials/ Minute |
Container Diameter | 15mm to 70mm | |
Container Height | 25mm to 140mm | |
Rubber Stopper | 13mm, 20mm and 28mm Butyl with the help of change part | |
Filling Range | 2ml to 250 ml | |
Filling Accuracy | + 0.5% - + 1% | + 0.5% - + 1% |
Optional Accessories | Programmable Logic Control (System) with MMI Safety Cabinet covering full machine |
Programmable Logic Control (System) with MMI Safety Cabinet covering full machine |
Power Supply | 1 H.P. | 1 H.P. |
Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
Overall Dimension | 2050mm (L) X 800mm (W) X 1680mm (H) | 2200mm (L) X 850mm (W) X 1680mm (H) |
(Dimension include main machine with in-feed turn table) |
The Vial Filling and Cap Sealing Machine is a single multi functional machine that can be used for filling injectable glass vials, stoppering them with the usage of rubber and for sealing them as well with high quality aluminum material. Although this Vial Cap Sealing Machine can do many functions; however, it is a very compact Vial Filling Machine. If you have been looking for something similar along these lines, please feel free to contact our experts for advice or assistance for the most suitable Filling and Cap Sealing Machine for your business. This machine has been termed as the ideal solution for companies looking for small but tunnel based filling line operations.
The Flip Off Cap Sealing Machine has been designed to increase the rate at which sealing of glass vials was done till now. This is a compact model to help you increase the efficiency and the output of the production. If you have been searching for the best Flip Off Cap Machine then Multi Pack Machinery offers the most cost effective machine for your business.
This machine is used for flip off cap sealing through aluminum of the glass vials that are already filled and stoppered. This Automatic Cap Sealing Machine is majorly used in the pharmaceutical industries. Furthermore, on the basis of the output required, one can easily change the sealing heads and alter the processes.
Model | ACS-60 | ACS-120 | ACS-250 |
---|---|---|---|
Number Of Heads | Two | Four | Eight |
Production Rate |
30 To 60 Vials/Minute |
60 To 120 Vials/Minute | 100 T0 200 Vials/Minute |
Input Specification Container Diameter Container Height: Rubber Stopper: |
15mm to 80mm 25mm to 180mm 13mm, 20mm & 28mm, 30mm & 33mm with the help of change parts |
||
Power Supply | 0.5 H.P. | 10 H.P. | 1.5 H.P. |
Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | ||
Optional Accessories | Aluminium Profile Cabinet Covering Full Machine Chuk for flip-off seal PLC with GUI |
||
Overall Dimension | 1250mm(L) X 800mm(W) X 1800 mm(H) |
1400mm (L) X 850mm (W) X 1800mm (H) |
2000mm (L) X 850mm(W) X 1800mm(H) |
(Dimension include basic machine & 30” In-feed turn table) |
The Vial Aluminum Cap Sealing Machine is used for sealing glass vials. These machines have been specifically used in pharmaceutical companies. The machine puts an aluminum cap on the vials for sealing them after they have been properly filled and stoppered. The vials are injectable glass vials essentially. In accordance with the required amount of output, you can easily alter the number of sealing heads.
The steel frames and doors in this Aluminum Cap Sealing Machine is used for servicing the machine in the best possible manner. The turntable of the filling machine continuously feeds conveyor belt. The Aluminum Vial Cap Sealing Machine ensures placement at equal intervals. During the infeed star wheel, the vials pick up their seals before the delivery chute is approached. The free spinning sealing rollers then complete the sealing process of the Aluminum Cap Sealing Machine.
Model | ACS-60 | ACS-120 | ACS-250 |
---|---|---|---|
Number of Heads | Two | Four | Eight |
Production Rate | 30 to 60 Vials/Minute |
60 to 120 Vials/Minute |
100 to 200 Vials/Minute |
Input Specification
Rubber Stopper: |
15mm to 80mm 25mm to 180mm 13mm, 20mm & 28mm, 30mm & 33mm with the help of change parts. |
||
Power Supply | 0.5 H.P. | 1 H.P. | 1.5 H.P |
Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | ||
Optional Accessories: |
|
||
Overall Dimension: | 1250mm(L) x 800mm(W) x 1800mm (H) |
1400mm (L) x 850mm (W) x 1800mm (H) |
2000mm (L) x 850mm (W) x 1800mm(H) |
(Dimension include basic machine & 30” In-feed turn table) | |||
Vacuum | 25 Hg. @ 300 LPM Displacement | ||
Relational Humidity | Below 28% | ||
Overall Dimension | 2100mm (L) X 842mm (W) X 1700mm (H) (Dimension include main machine with in-feed turn table) |
The High Speed Ampoule Filling and Sealing Machine is majorly used for filling and sealing of glass ampoules of all types. The Ampoule Filling Machine is essentially designed for the purpose of usage in industries like biotech, pharmaceutical, cosmetic and chemicals. Multi Pack Machinery offers standardized solutions as well as customized machinery as per the requirement of a particular customer.
The machine is built using slant travel of the ampoules during the filling and sealing processes. This helps in taking care of diverse types of ampoules that vary from each other in terms of thickness or dimensions etc. The sterile ampoule filler sealer is built of stainless steel with matt finish on it. The large mouth of the machine enables the user to clean the ampoule filler sealer with ease. The electrical control panel is made in a pendant style to ensure safety is taken care of at every point
AFS-30 | AFS-55 | AFS-100 | AFS-150 | |
---|---|---|---|---|
No. of Heads | Single | Two | Four | Six |
Ampoule Handling Range | 1 ml to 20 ml | 1 ml to 20 ml | 1 ml to 10 ml | 1 ml to 10 ml |
Production Output | 15 to 30 ampoule/minute | 30 to 55 ampoule/minute | 55 to 100 ampoule/minute | 80 to 150 ampoule/minute |
Filling Accuracy | ± 1% | ± 1% | ± 1% | ± 1% |
Require Gas for Sealing | LPG & Oxygen (Oâ) | LPG & Oxygen (Oâ) | LPG & Oxygen (Oâ) | LPG & Oxygen (Oâ) |
Nitrogen Flushing | Pre & Post Nitrogen Flushing Available | Pre & Post Nitrogen Flushing Available | Pre & Post Nitrogen Flushing Available | Pre & Post Nitrogen Flushing Available |
Power Specification | 0.5.H.P. | 1 H.P. | 1 H.P. | 1 H.P. |
Electrical Characteristics | 230 Volts, Single Phase, 50 Hertz, 4 Wire System | 230 Volts, Single Phase, 50 Hertz, 4 Wire System | 230 Volts, Single Phase, 50 Hertz, 4 Wire System | 230 Volts, Single Phase, 50 Hertz, 4 Wire System |
Contact Parts | Made From Stainless Steel 316L | Made From Stainless Steel 316L | Made From Stainless Steel 316L | Made From Stainless Steel 316L |
Non Contact Parts | Made from Stainless Steel 304 | Made from Stainless Steel 304 | Made from Stainless Steel 304 | Made from Stainless Steel 304 |
Overall Dimension | 915mm (L) X 610mm (W) X 965mm (H) |
915mm (L) X 760mm (W) X 965mm (H) |
1200mm (L) X 1070mm (W) X 965mm (H) |
1600mm (L) X 1400mm (W) X 1400mm (H) |
The Eight Head Ampoule Filling Sealing Machine has been manufactured on the basis of a popular principle in machines i.e. slant travelling of ampoules during the filling and sealing process. This is done to take care of a diverse variety of ampoule dimensions of neck and thickness of the present standard ampoules.
The filling unit was built on stainless steel square pipe framing and is totally made of stainless steel coverings. The stainless steel is made of matt finish. Furthermore, the huge opening is made and available at the bottom side of the Automatic Eight Head Ampoule Filling and Sealing Machine to ensure that the cleaning is much more easier as compared to other machines. The pendant type electrical control panel is removed from the machine to ease the cleaning process even more. These processes allow a better way of operation of the machine as well.
The Glass Ampoule Filling Sealing Machine has been assembled based on the most tried and tested module and principle of slant travelling of ampoules during the filling and sealing of ampoules through the Ampoule Filling Machine. This is done to ensure that the maximum amount of optimization of resources is done for filling and sealing of all types of ampoules that vary from each other in terms of dimensions, thickness and or any other variation.
Matt Finish is given to the filling units that is built on the Stainless steel material square pipes and these are completely made of SS coverings. In order to ensure that the users do not face any issues with the cleaning and maintenance of the machine, a considerable sized opening is given at the bottom. An electrical control panel has also been made in a pendant form which can be easily removed from the machine in order to further ease the process of operations and to ensure that the operations are safe. This machine has been considered as the best glass ampoule filling and sealing machine for industries like cosmetic, pharmaceutical, agriculture and chemical.