GST : 27AZQPS3702C1ZB
Verified
Write a Review
Our Products
Steel And Stainless Steel Coils
2 Products available317 Stainless Steel Pipe
2 Products availablePipe Elbows
2 Products availableHeat Exchanger Parts
2 Products availableLeading Manufacturer, Supplier & Retailer of Copper Tubes, Air Conditioner Copper Pipe, Copper Pipe, Admiralty brass rectangular tubes and Soft copper tube.
Multi Alloys International offers a wide range of Seamless copper tubes.These tubes are supplied in both Hard Drawn Straight Length & Bright annealed Pancake Coils. These tubes are manufactured as per International and National Standards required by client.All tubes are electronically tested by Eddy Current method, as per the requirements of ASTM E 243.Indigo tubes are 100% carbon free. All tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2).Coils are normally furnished in O60 temper and straight lengths in H58 temper.100% RoHS Compliance.
Additional Information:
Packaging Details : WOODEN BOXES
Multi Alloys International offers a wide range of Seamless copper tubes.
These tubes are supplied in both Hard Drawn Straight Length & Bright annealed Pancake Coils. These tubes are manufactured as per International and National Standards required by client.
All tubes are electronically tested by Eddy Current method, as per the requirements of ASTM E 243.
Indigo tubes are 100% carbon free. All tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2).
Coils are normally furnished in O60 temper and straight lengths in H58 temper.
100% RoHS Compliance.
Additional Information:
Packaging Details : wooden box export worthy sea worthy
Delivery Time : as per size and qty
Copper pipe is almost pure copper manufactured to the requirements ofASTM B 42 - Standard Specification for Seamless Copper Pipe, Standard Sizes. It may be manufactured from any of five (5) copper alloys (C10200, C10300, C10800, C12000, C12200) that all conform to the chemical composition requirements of alloys containing a minimum of 99.9% Copper (Cu) and a maximum of 0.04% Phosphorous (P). Available sizes are 1/8" to 12" diameters in regular wall thickness and 1/8" to 10" in extra strong wall thickness. The standard length for copper pipe is 12 feet. Copper pipe is suitable for plumbing, boiler feed lines, refrigeration and for similar purposes.
Joints in seamless copper pipe can be threaded, flanged or brazed to fittings of the appropriate joint configuration.
Additional Information:
Packaging Details : wooden box sea worthy export wortthy
Delivery Time : as per size and qty
Multi Alloys International is one of the leading manufacturers, exporters and suppliers of a complete line of Brass Tubes. These are manufactured by adept technicians in accordance to the set domain guidelines & norms to ensure excellent performance, durability, rugged construction, reliable operation and corrosion resistance. Available in both standard & customized forms, our Brass Tubes are affordable in prices and find usage in diverse industries across the globe.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : wooden box as per export worthy
Delivery Time : as per size and qty
multi alloys international offers a wide range of seamless copper tubes.
these tubes are supplied in both hard drawn straight length & bright annealed pancake coils. these tubes are manufactured as per international and national standards required by client.
all tubes are electronically tested by eddy current method, as per the requirements of astm e 243.
indigo tubes are 100% carbon free. all tubes are cleaned and sample tested to meet the residual requirements as specified by the codes at 0.038g/m2 (0.35g/ft2).
coils are normally furnished in o60 temper and straight lengths in h58 temper.
100% rohs compliance.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : Wooden box
Delivery Time : as per size and qty
admiralty brass tubes:
admiralty brass tubes c44300-has good corrosion resistance and is specially used for tubing of steam condensers cooled with fresh, salt or brackish water. admiralty metal tubes are also used for heat exchangers in oil refineries, in which corrosion from sulphur compounds and contaminated water may be very severe, and for feed-water heaters and heat-exchanger equipment as well as other industrial processes.
characteristics:
a copper zinc alloy containing tin and small amount of arsenic which is added as an inhibitor against dezincification. the pressure of tin imparts to the alloy good corrosion resistance in moderately polluted river water and clean sea water, either stagnant or slow moving (up to 2 metres/sec.). this is the most common and wrought form of tube for heat exchange equipment.
Additional Information:
Packaging Details : wooden box as export worthy
Delivery Time : as per size and qty
70/30 Cupro Nickelis very widely employed in water desalination plants, especially in the most critical areas such as the heat reject and brine heater stages, as well as in the under cooling areas of power station condensers, in the chemical, petrochemical and food processing industries and, more generally, in all applications where top corrosion resistance is required from both the shell and tube side.
Additional Information:
Packaging Details : wooden box
Delivery Time : as per size and qty
Applications :
To avoid the risk of deposit attack, it is generally recommended to never operate at water velocities below about 0.8-1 m/s (2.5-3.5 ft/s). 90/10 Cupro Nickel can also be used, with appropriately reduced flow velocity, in contact with water containing some sulphides or suspended solids. It is also often selected for its good mechanical properties, both at room and relatively elevated temperatures.
Additional Information:
Packaging Details : WOODEN BOX
Delivery Time : as per size and qty
Features :
PROPERTIES OF COPPER NICKEL BRAKE TUBINGS:
APPLICATIONS:
ADVANTAGES OF BRAKE TUBING MATERIAL:
Specifications
| OD | Wall Thickness | Recommended Maximum Working Pressure |
|---|---|---|
| Inches | Inches | lb/in2 (Bar) |
| 3/16" | 0.028" | 3120 (215) |
| 1/4" | 0.028" | 2250 (155) |
| 5/16" | 0.028" | 1740 (120) |
| 3/8" | 0.028" | 1450 (100) |
| 1/2" | 0.028" | 1090 (75) |
| 5/8" | 0.048" | 1450 (100) |
Features :
To avoid the risk of deposit attack, it is generally recommended to never operate at water velocities below about 0.8-1 m/s (2.5-3.5 ft/s). 90/10 Cupro Nickel can also be used, with appropriately reduced flow velocity, in contact with water containing some sulphides or suspended solids. It is also often selected for its good mechanical properties, both at room and relatively elevated temperatures.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union
Packaging Details : wooden box
Delivery Time : as per size and qty
