Mukesh Trading Company

New Rohtak Road, Delhi

Features:-

• Body and base are made of special high strength fine-grain cast iron for toughness and rigidity.
• Moving Jaw run in long Prismatic slides with provision for wear adjustment.
• The removable hardened steel Jaws. Fix jaw provided with "V" grooves.
• The totally enclosed acme thread adjusting screw with a replaceable screw bushing & thrust collar.
• The vice can be fitted to the tool table with or without the 360⁰graduated base.
• The vice can be centered using longitude tenon slots. Supplied complete with handle.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.

• Sturdy & accurately made machine vices from graded casting.
• Fine acme thread screw.
• Jaws are made of special steel properly hardened, fixed jaw is provided with vertical & horizontal 'V' groove to hold the round job firmly.
• The swivel base is graduated fully through 360.
• Vice can be converted from swivel base to fix by removing the base.
• Quick alignment to machines through longitudinal slot provided in base & body.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.
• Body is provided with water channel.
• Depth of jaws is more to hold heavy jobs.

Features:-

• Heavy duty shaper vice sturdy constructed from close grain casting for use on shaper machines, planners & other heavy duty machines permitting wider application for taller work pieces.
• It is designed to permit maximum opening jaws to hold heavy & taller jobs.
• High tensile steel square thread screw.
• The jaws are made of special steels. These are precisely ground & serrated to ensure firm grips on heavy jobs.
• Swivel base is indexed to 360, when required to use as stationery vice, the base can be removed.
• Crank handle is made of unbreakable steel, provided with a spring loaded mechanism providing positive grip.

Features:-

• Unique Tilt Lock Vices can with stand heavy jobs.
• Top & Bottom of vice bed, bottom & both sides of jaws & all jaw mounting surfaces are precision ground.
• By reversing the jaws plates the jaws are raised & can be fitted to both ends of the fixed jaws & the moveable jaws.
• The four different positions of jaw plates pair are available for more gripping area.
• Coolant through on vise body and swivel base.
• Chip clerance holes . No dead pockets.
• Swivel handle allows the screw head revolved on machine table.
• The vice can be disassembled and repaired by regrinding.

Features:-

• Body is made of grey cast iron.
• High quality ACME steel screw.
• Hardened & accurately ground jaws provided with 'V' groove.
• This vice can'set up at any angle with positive locking.
• Upper angle base can incline from the horizontal position to the vertical position.
• The lower angle setting base can incline up to 45in both right & left direction.
• The entire unit may be swivelled on base plate through 360.
• Quick alignment to machines though longitudinal slot provided in base.
• Crank handle is made of unbreakable steel provided with a spring loaded mechanism providing positive grip.

Features:-

• Accurately designed for use on surface, universal tool & cutter grinding machines.
• Unbreakable steel body.
• Accurately groung jews made out of special steel for firm grip.
• All swivelling movements have positive locking and the job can be locked at any compound angle.

Features:-

• Body made out of special graded casting.
• Hardened steel Jaws provided "v" grooves for round jobs both Horizontally & Vertically.
• Special Steel Screw is provided for long life.
• Swivel Base to rotate 360 is provided in U314S.

DRILL PRESS VICE PRECISION(MTC-213)

Features:-

• Body made of grade one casting.
• "V" for round Jobs is provided vertically and horizontally.
• Special Steel Hardened jaws.
• Ideal for drilling operations.

Features

• Compact and Indispensable vice for drilling machines.
• Hardened and ground steel jaws provided with horizontal and vertical notches for holding round, square and irregular jobs.
• Available in cast iron and malleable frame.

Features

• Clamping force right behind work.
• No lifting of the sliding jaw.
• Used for light milling & drill works, simple but sturdy.
• Fitted with all over hardened ground high quality steel jaws.
• Moving jaw is plain and other is provided with one vertical & two horizontal 90 V-grooves.

(MTC- 216)

Features

• Unique design for high accuracy.
• Minimum vibration.
• Low height with rigidity.

Features

• Pipe vice provided with square steel pillar.
• Replaceable steel jaws.
• Pipe vice provided with round grinded pillar.
• Replaceable steel jaws.

Features:-

Features:-

• Ideal for technical institutes.
• Robust construction.
• Popular for do it yourself enthusiast.
• Body of cast iron.
• Spindle screw, sliding rods and handle is of high quality steel.

CARPENTER'S(MTC-218 D)

Features

• The T section is made of special cold drawn steel with 2" section.
• Malleable head & slide for heavy duty jop.
• Acme thread main screw for smooth running.
• The sliding head can be fixed to any hole with help of a steel pin.

Features:-

• It is a rear jaws sliding bench vice.
• Hardened and ground jaws.
• High tensile steel forging screw and nut.
• Nut and screw matched with same degree of threads for long life preformance.
• All parts are interchangable and available as spares.
• It is an ideal vice for tool room & automobile industry.

Features:-

• Used for holding the jobs, spark erosion operation, right angle grinding & Light machining.
• Made from high quality alloy steel.
• Accuracy for Square ness, Flatness & Paralleism within 0.005mm.
• Jaw pressure on work piece is forward & downward for repeatable positioning & maximum holding power.
• All sides can be used as reference.
• "V" on moveable jaw for better gripping of round jobs.

Features

• Used to draw the wire

Features

• Unique compact vices are made of grey iron casting. mainly used for metal and wood working
• We have different models for different application.

Features

• Ideal vice for irregular jop.
• With no limit of depth of jaws.

Features:-

• Hand vice for light jobs.
• Ideal for watch makers.

Features:-

• Chains are of high tensile steel.
• Used for power-full grip.